AS/NZS 4755.3.3:2014
Demand response capabilities and supporting technologies for electrical products - Part 3.3: Interaction of demand response enabling devices and electrical products - Operational instructions and connections for electric storage and electric-boosted stor
Applies to electrical products that do not contain a DRED, and have a demand response interface intended to connect with a DRED that will be provided by others. It specifies a set of operational instructions that will meet the requirements of remote agents wishing to control the energy consumption of electric and electric boosted water heaters. It also establishes a consistent approach to the method of connecting the demand response interface to the DRED. Electric storage water heaters of which the rated electrical power is 7.2 kW or less are covered by this Standard.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$108.90 NZD
|
|
| HardCopy |
$121.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 4755.3.3:2014 DEMAND RESPONSE CAPABILITIES AND SUPPORTING TECHNOLOGIES FOR ELECTRICAL PRODUCTS - INTERACTION OF...
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 REFERENCED DOCUMENTS
1.3 DEFINITIONS
1.3.1 Asserted
1.3.2 Automatic override
1.3.3 Circumvention device
1.3.4 Demand response (DR)
1.3.5 Demand response capability
1.3.6 Demand response enabling device (DRED)
1.3.7 Demand response event
1.3.8 Demand response interface
1.3.9 Demand response mode (DRM)
1.3.10 Electrical product
1.3.11 Electric storage water heater
1.3.12 Electric-boosted water heater
1.3.13 Extra-low voltage
1.3.14 Heat exchange water heater
1.3.15 Heat pump water heater
1.3.16 Heating element
1.3.17 Higher storage mode operation
1.3.18 Instantaneous water heater
1.3.19 Maintenance or safety mode
1.3.20 Manual override
1.3.21 Normal operation
1.3.22 Operational instruction (OI)
1.3.23 Rated electrical power
1.3.24 Remote agent
1.3.25 Response time
1.3.26 RJ45 connector
1.3.27 Safety extra-low voltage (SELV)
1.3.28 Shall
1.3.29 Should
1.3.30 Switch
1.3.31 User
SECTION 2 OPERATIONAL INSTRUCTIONS AND DEMAND RESPONSE MODES
2.1 GENERAL PRINCIPLES
2.2 DEMAND RESPONSE MODES
2.2.1 Mandatory and optional demand response modes
2.2.2 DRM 2 and DRM 3 operation
2.2.3 DRM 4 Higher storage mode operation
2.3 MANUAL OVERRIDE
2.4 AUTOMATIC OVERRIDE
2.5 RESPONSE TIMES
2.6 OPERATION OF AUXILIARY EQUIPMENT
2.7 MULTIPLE OPERATIONAL INSTRUCTIONS
SECTION 3 INTERFACES
3.1 GENERAL
3.2 PHYSICAL INTERFACES
3.3 RJ45 SOCKET
3.3.1 RJ45 socket pin assignment
3.3.2 RJ45 socket specifications
3.4 TERMINAL BLOCK
3.4.1 Terminal block configuration
3.4.2 Terminal block specifications
3.5 CIRCUIT TO DRED
3.6 OPTIONAL 230 V AC POWER SUPPLY
3.7 OPTIONAL EXTRA-LOW VOLTAGE POWER SUPPLY
3.8 LOCATION AND ACCESS
SECTION 4 LABELLING AND MARKING OF DEMAND RESPONSE CAPABILITY
4.1 GENERAL
4.2 REGISTRATION
4.3 POINT OF SALE LABELLING
4.4 MARKING
4.5 DOCUMENTATION
SECTION 5 VERIFICATION OF CLAIMED DEMAND RESPONSE CAPABILITY
5.1 SET-UP FOR TESTING
5.2 TESTING RESPONSES TO OPERATING INSTRUCTIONS
5.3 NON-COMPLIANCE
5.4 VERIFICATION OF CLAIMED COMPLIANCE WITH DRM 1
5.5 VERIFICATION OF CLAIMED COMPLIANCE WITH DRM 2
5.6 VERIFICATION OF CLAIMED COMPLIANCE WITH DRM 3
5.7 VERIFICATION OF CLAIMED COMPLIANCE WITH DRM 4
5.8 REPORTING
APPENDIX A - REGISTRATION INFORMATION FOR WATER HEATERS COMPLYING WITH AS/NZS 4755.3.3
APPENDIX B - VERIFICATION OF CLAIMED DEMAND RESPONSE CAPABILITY FOR WATER HEATERS
APPENDIX C - EXAMPLE OF CIRCUIT WITH 6 PIN CONNECTIONS
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
References
Demand response capabilities and supporting technologies for electrical products - Part 3.1: Interaction of demand response enabling devices and electrical products - Operational instructions and connections for air conditioners
Heat pump water heaters - Performance assessment - Air source heat pump water heaters
Related Information
Energy Efficiency (Energy Using Products) Regulations 2002
Ministry: Ministry of Business Innovation and Employment - Energy Resources and Markets (ERM)
Citation context:Similar Standards
-
AS/NZS 4325.1:1995
Compression and mechanical connectors for power cables with copper or aluminium conductors - Test methods and requirements
-
AS/NZS 4325.1:1995 A1
Compression and mechanical connectors for power cables with copper or aluminium conductors - Test methods and requirements: Amendment 1
-
AS/NZS 4396:1999
Connectors - Insulation piercing - For 0.6/1 kV aerial bundled cables
-
AS/NZS 4437:1996
Solderless crimped connections - General requirements, test methods and practical guidance
AS/NZS 4755.3.3:2014 DEMAND RESPONSE CAPABILITIES AND SUPPORTING TECHNOLOGIES FOR ELECTRICAL PRODUCTS - INTERACTION OF...
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 REFERENCED DOCUMENTS
1.3 DEFINITIONS
1.3.1 Asserted
1.3.2 Automatic override
1.3.3 Circumvention device
1.3.4 Demand response (DR)
1.3.5 Demand response capability
1.3.6 Demand response enabling device (DRED)
1.3.7 Demand response event
1.3.8 Demand response interface
1.3.9 Demand response mode (DRM)
1.3.10 Electrical product
1.3.11 Electric storage water heater
1.3.12 Electric-boosted water heater
1.3.13 Extra-low voltage
1.3.14 Heat exchange water heater
1.3.15 Heat pump water heater
1.3.16 Heating element
1.3.17 Higher storage mode operation
1.3.18 Instantaneous water heater
1.3.19 Maintenance or safety mode
1.3.20 Manual override
1.3.21 Normal operation
1.3.22 Operational instruction (OI)
1.3.23 Rated electrical power
1.3.24 Remote agent
1.3.25 Response time
1.3.26 RJ45 connector
1.3.27 Safety extra-low voltage (SELV)
1.3.28 Shall
1.3.29 Should
1.3.30 Switch
1.3.31 User
SECTION 2 OPERATIONAL INSTRUCTIONS AND DEMAND RESPONSE MODES
2.1 GENERAL PRINCIPLES
2.2 DEMAND RESPONSE MODES
2.2.1 Mandatory and optional demand response modes
2.2.2 DRM 2 and DRM 3 operation
2.2.3 DRM 4 Higher storage mode operation
2.3 MANUAL OVERRIDE
2.4 AUTOMATIC OVERRIDE
2.5 RESPONSE TIMES
2.6 OPERATION OF AUXILIARY EQUIPMENT
2.7 MULTIPLE OPERATIONAL INSTRUCTIONS
SECTION 3 INTERFACES
3.1 GENERAL
3.2 PHYSICAL INTERFACES
3.3 RJ45 SOCKET
3.3.1 RJ45 socket pin assignment
3.3.2 RJ45 socket specifications
3.4 TERMINAL BLOCK
3.4.1 Terminal block configuration
3.4.2 Terminal block specifications
3.5 CIRCUIT TO DRED
3.6 OPTIONAL 230 V AC POWER SUPPLY
3.7 OPTIONAL EXTRA-LOW VOLTAGE POWER SUPPLY
3.8 LOCATION AND ACCESS
SECTION 4 LABELLING AND MARKING OF DEMAND RESPONSE CAPABILITY
4.1 GENERAL
4.2 REGISTRATION
4.3 POINT OF SALE LABELLING
4.4 MARKING
4.5 DOCUMENTATION
SECTION 5 VERIFICATION OF CLAIMED DEMAND RESPONSE CAPABILITY
5.1 SET-UP FOR TESTING
5.2 TESTING RESPONSES TO OPERATING INSTRUCTIONS
5.3 NON-COMPLIANCE
5.4 VERIFICATION OF CLAIMED COMPLIANCE WITH DRM 1
5.5 VERIFICATION OF CLAIMED COMPLIANCE WITH DRM 2
5.6 VERIFICATION OF CLAIMED COMPLIANCE WITH DRM 3
5.7 VERIFICATION OF CLAIMED COMPLIANCE WITH DRM 4
5.8 REPORTING
APPENDIX A - REGISTRATION INFORMATION FOR WATER HEATERS COMPLYING WITH AS/NZS 4755.3.3
APPENDIX B - VERIFICATION OF CLAIMED DEMAND RESPONSE CAPABILITY FOR WATER HEATERS
APPENDIX C - EXAMPLE OF CIRCUIT WITH 6 PIN CONNECTIONS
AS/NZS 4755.3.3:2014
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.