AS/NZS 4755.3.1:2012
Demand response capabilities and supporting technologies for electrical products - Part 3.1: Interaction of demand response enabling devices and electrical products - Operational instructions and connections for air conditioners
Defines a set of operational instructions that will meet the requirements of remote agents wishing to control the energy consumption and operation of air conditioners and establishes a consistent approach to the method of connecting the demand response interface to the demand response enabling device (DRED). Air conditioners covered by this Standard include, but are not restricted to, single-phase and three-phase air conditioners of the vapour compression type that fall within the scope of the AS/NZS 3823 series.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$108.90 NZD
|
|
| HardCopy |
$121.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 4755.3.1:2012 DEMAND RESPONSE CAPABILITIES AND SUPPORTING TECHNOLOGIES FOR ELECTRICAL PRODUCTS - INTERACTION OF...
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 REFERENCED DOCUMENTS
1.3 DEFINITIONS
1.3.1 Air conditioner
1.3.2 Asserted
1.3.3 Authorized person
1.3.4 Automatic override
1.3.5 Circumvention device
1.3.6 Demand response (DR)
1.3.7 Demand response capability
1.3.8 Demand response capable air conditioner
1.3.9 Demand response enabling device (DRED)
1.3.10 Demand response event
1.3.11 Demand response interface
1.3.12 Demand response mode (DRM)
1.3.13 Electrical product
1.3.14 Extra low voltage
1.3.15 Manual override
1.3.16 Maintenance and safety modes
1.3.17 Normal operation
1.3.18 Operational instruction
1.3.19 Rated capacity
1.3.20 Rated electrical power
1.3.21 Remote agent
1.3.22 Response time
1.3.23 RJ45 connector
1.3.24 Safety extra-low voltage (SELV)
1.3.25 Should
1.3.26 Shall
1.3.27 Switch
1.3.28 User
SECTION 2 OPERATIONAL INSTRUCTIONS AND DEMAND RESPONSE MODES
2.1 GENERAL PRINCIPLES
2.2 DEMAND RESPONSE MODES
2.3 OVERRIDE CAPABILITY
2.4 RESPONSE TIMES
2.5 OPERATION OF AUXILIARY EQUIPMENT
2.6 HEATING AND COOLING MODES
2.7 OVER-CAPACITY OPERATION
SECTION 3 INTERFACES
3.1 GENERAL
3.2 PHYSICAL INTERFACES
3.3 TERMINAL BLOCK
3.3.1 Terminal block pin assignments
3.3.2 Terminal block specifications
3.4 RJ45 SOCKET
3.4.1 RJ45 socket pin assignment
3.4.2 RJ45 socket specifications
3.5 CIRCUIT TO DRED
3.6 OPTIONAL ELECTRICAL SUPPLY
3.7 LOCATION AND ACCESS
SECTION 4 LABELLING AND MARKING OF DEMAND RESPONSE CAPABILITY
4.1 GENERAL
4.2 REGISTRATION
4.3 POINT OF SALE LABELLING
4.4 MARKING
4.5 MANUFACTURER'S LITERATURE
SECTION 5 TESTING AND VERIFYING DEMAND RESPONSE CAPABILITY
5.1 VERIFICATION OF CLAIMED DEMAND RESPONSE CAPABILITY
5.2 SET-UP FOR TESTING
5.3 VERIFICATION OF CLAIMED COMPLIANCE WITH DRM 1
5.3.1 Interrupting operation by a DRM 1 event
5.3.2 Switching on during a DRM 1 event
5.4 VERIFICATION OF CLAIMED COMPLIANCE WITH DRM 2
5.4.1 Interrupting operation by a DRM 2 event
5.4.2 Switching on during a DRM 2 event
5.5 VERIFICATION OF CLAIMED COMPLIANCE WITH DRM 3
5.5.1 Interrupting operation by a DRM 3 event
5.5.2 Switching on during a DRM 3 event
5.6 TEST REPORT
APPENDIX A - VERIFICATION OF CLAIMED DEMAND RESPONSE CAPABILITY FOR AIR CONDITIONERS
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
References
Performance of electrical appliances - Air conditioners and heat pumps - Part 2: Energy labelling and minimum energy performance standards (MEPS) requirements
Related Information
Similar Standards
-
AS/NZS 4325.1:1995
Compression and mechanical connectors for power cables with copper or aluminium conductors - Test methods and requirements
-
AS/NZS 4325.1:1995 A1
Compression and mechanical connectors for power cables with copper or aluminium conductors - Test methods and requirements: Amendment 1
-
AS/NZS 4396:1999
Connectors - Insulation piercing - For 0.6/1 kV aerial bundled cables
-
AS/NZS 4437:1996
Solderless crimped connections - General requirements, test methods and practical guidance
AS/NZS 4755.3.1:2012 DEMAND RESPONSE CAPABILITIES AND SUPPORTING TECHNOLOGIES FOR ELECTRICAL PRODUCTS - INTERACTION OF...
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 REFERENCED DOCUMENTS
1.3 DEFINITIONS
1.3.1 Air conditioner
1.3.2 Asserted
1.3.3 Authorized person
1.3.4 Automatic override
1.3.5 Circumvention device
1.3.6 Demand response (DR)
1.3.7 Demand response capability
1.3.8 Demand response capable air conditioner
1.3.9 Demand response enabling device (DRED)
1.3.10 Demand response event
1.3.11 Demand response interface
1.3.12 Demand response mode (DRM)
1.3.13 Electrical product
1.3.14 Extra low voltage
1.3.15 Manual override
1.3.16 Maintenance and safety modes
1.3.17 Normal operation
1.3.18 Operational instruction
1.3.19 Rated capacity
1.3.20 Rated electrical power
1.3.21 Remote agent
1.3.22 Response time
1.3.23 RJ45 connector
1.3.24 Safety extra-low voltage (SELV)
1.3.25 Should
1.3.26 Shall
1.3.27 Switch
1.3.28 User
SECTION 2 OPERATIONAL INSTRUCTIONS AND DEMAND RESPONSE MODES
2.1 GENERAL PRINCIPLES
2.2 DEMAND RESPONSE MODES
2.3 OVERRIDE CAPABILITY
2.4 RESPONSE TIMES
2.5 OPERATION OF AUXILIARY EQUIPMENT
2.6 HEATING AND COOLING MODES
2.7 OVER-CAPACITY OPERATION
SECTION 3 INTERFACES
3.1 GENERAL
3.2 PHYSICAL INTERFACES
3.3 TERMINAL BLOCK
3.3.1 Terminal block pin assignments
3.3.2 Terminal block specifications
3.4 RJ45 SOCKET
3.4.1 RJ45 socket pin assignment
3.4.2 RJ45 socket specifications
3.5 CIRCUIT TO DRED
3.6 OPTIONAL ELECTRICAL SUPPLY
3.7 LOCATION AND ACCESS
SECTION 4 LABELLING AND MARKING OF DEMAND RESPONSE CAPABILITY
4.1 GENERAL
4.2 REGISTRATION
4.3 POINT OF SALE LABELLING
4.4 MARKING
4.5 MANUFACTURER'S LITERATURE
SECTION 5 TESTING AND VERIFYING DEMAND RESPONSE CAPABILITY
5.1 VERIFICATION OF CLAIMED DEMAND RESPONSE CAPABILITY
5.2 SET-UP FOR TESTING
5.3 VERIFICATION OF CLAIMED COMPLIANCE WITH DRM 1
5.3.1 Interrupting operation by a DRM 1 event
5.3.2 Switching on during a DRM 1 event
5.4 VERIFICATION OF CLAIMED COMPLIANCE WITH DRM 2
5.4.1 Interrupting operation by a DRM 2 event
5.4.2 Switching on during a DRM 2 event
5.5 VERIFICATION OF CLAIMED COMPLIANCE WITH DRM 3
5.5.1 Interrupting operation by a DRM 3 event
5.5.2 Switching on during a DRM 3 event
5.6 TEST REPORT
APPENDIX A - VERIFICATION OF CLAIMED DEMAND RESPONSE CAPABILITY FOR AIR CONDITIONERS
AS/NZS 4755.3.1:2012
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.