AS/NZS 4755.1:2017
Demand response capabilities and supporting technologies for electrical products - Part 1: Demand response framework and requirements for demand response enabling devices (DREDs)
Supports demand response programs which optimize the operation of the electricity supply system and allow the efficient planning and use of capital equipment, while minimizing the risks to the comfort and amenity of the users of electrical products.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$132.30 NZD
|
|
| HardCopy |
$147.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 4755.1:2017 DEMAND RESPONSE CAPABILITIES AND SUPPORTING TECHNOLOGIES FOR ELECTRICAL PRODUCTS - DEMAND RESPONSE...
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 REFERENCED DOCUMENTS
1.3 DEFINITIONS
1.3.1 Activated
1.3.2 Asserted
1.3.3 Authorized person
1.3.4 Circumvention device
1.3.5 Command
1.3.6 Deactivated
1.3.7 Demand response (DR)
1.3.8 Demand response capability
1.3.9 Demand response enabling device (DRED)
1.3.10 Demand response event
1.3.11 Demand response interface
1.3.12 Demand response mode (DRM)
1.3.13 Electrical product
1.3.14 Extra low voltage
1.3.15 Multi-interface DRED
1.3.16 Multi-part DRED
1.3.17 Operational instruction (OI)
1.3.18 Operational instruction group (OI Group)
1.3.19 Remote agent
1.3.20 Reset
1.3.21 RJ45 Connector
1.3.22 Safety extra-low voltage (SELV)
1.3.23 Shall
1.3.24 Should
1.3.25 Standby power
1.3.26 Switch
1.3.27 User
1.3.28 User operation
1.3.29 User over-ride
SECTION 2 DEMAND RESPONSE FRAMEWORK
2.1 GENERAL
2.2 DEMAND RESPONSE SYSTEM
SECTION 3 MINIMUM REQUIREMENTS OF A DRED
3.1 GENERAL
3.2 MINIMUM CAPABILITIES AND REQUIREMENTS
3.3 COMMANDS AND OPERATIONAL INSTRUCTIONS
3.3.1 Event commands
3.3.2 Operational instructions
3.4 PHYSICAL AND ELECTRICAL REQUIREMENTS
3.4.1 Interface
3.4.2 RJ45 Connector
3.4.3 Circuit to DRED
3.4.4 Power supply to DRED
3.4.5 Installation, location and access
3.4.6 Means for reset by authorized person
3.4.7 User over-ride
3.4.8 Interface adaptor
SECTION 4 OPTIONAL CAPABILITIES OF A DRED
4.1 GENERAL
4.2 RECORDING CONNECTED ELECTRICAL PRODUCTS
4.3 TWO-WAY COMMUNICATIONS
4.4 STANDARD DIMENSIONAL CONSTRAINTS
SECTION 5 LABELLING AND MARKING
5.1 GENERAL
5.2 REGISTRATION
5.3 POINT OF SALE LABELLING
5.4 MARKING
5.4.1 Marking of DREDs
5.4.2 Marking of adapters
5.5 DOCUMENTATION
SECTION 6 TESTING AND VERIFICATION
6.1 GENERAL
6.2 SET-UP FOR TESTING
6.2.1 Set-up for DRED
6.2.2 Set-up for demand response interfaces
6.3 TESTING AND COMPLIANCE REPORT
APPENDIX A - STATEMENTS OF COMPLIANCE AND TEST REPORTS
APPENDIX B - CLASS B DRED (ZIGBEE SEP 1.1.X ENABLED)
B1 GENERAL
B2 DEFINITIONS
B3 PROVISIONING AND COMMISSIONING
B4 TIME
B5 FREQUENCY AGILITY
B6 DIAGNOSTIC CAPABILITIES
B7 COMMAND 'PAYLOAD' FORMAT
B8 CLIENT CLUSTER ATTRIBUTES
APPENDIX C - CLASS C DRED (RIPPLE CONTROL ENABLED)
C1 GENERAL
C2 DEFINITIONS
C3 DESIGNATION AND MARKING
C4 COMMAND FORMAT
C5 RECORDING RIPPLE CONTROL TELEGRAMS
APPENDIX D - EXAMPLE OF CIRCUIT WITH SIX PIN CONNECTIONS
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
References
Demand response capabilities and supporting technologies for electrical products - Part 3.1: Interaction of demand response enabling devices and electrical products - Operational instructions and connections for air conditioners
Demand response capabilities and supporting technologies for electrical products - Part 3.2: Interaction of demand response enabling devices and electrical products - Operational instructions and connections for devices controlling swimming pool pump-uni
Demand response capabilities and supporting technologies for electrical products - Part 3.3: Interaction of demand response enabling devices and electrical products - Operational instructions and connections for electric storage and electric-boosted stor
Demand response capabilities and supporting technologies for electrical products - Part 3.5: Interaction of demand response enabling devices and electrical products - Operational instructions and connections for grid-connected electrical energy storage (
Grid connection of energy systems via inverters - Part 2: Inverter requirements
Related Information
Energy Efficiency (Energy Using Products) Regulations 2002
Ministry: Ministry of Business Innovation and Employment - Energy Resources and Markets (ERM)
Citation context:Incorporates the most recent version of this standard for administrative simplicity (no changes to requirements).
Similar Standards
-
AS/NZS 4325.1:1995
Compression and mechanical connectors for power cables with copper or aluminium conductors - Test methods and requirements
-
AS/NZS 4325.1:1995 A1
Compression and mechanical connectors for power cables with copper or aluminium conductors - Test methods and requirements: Amendment 1
-
AS/NZS 4396:1999
Connectors - Insulation piercing - For 0.6/1 kV aerial bundled cables
-
AS/NZS 4437:1996
Solderless crimped connections - General requirements, test methods and practical guidance
AS/NZS 4755.1:2017 DEMAND RESPONSE CAPABILITIES AND SUPPORTING TECHNOLOGIES FOR ELECTRICAL PRODUCTS - DEMAND RESPONSE...
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 REFERENCED DOCUMENTS
1.3 DEFINITIONS
1.3.1 Activated
1.3.2 Asserted
1.3.3 Authorized person
1.3.4 Circumvention device
1.3.5 Command
1.3.6 Deactivated
1.3.7 Demand response (DR)
1.3.8 Demand response capability
1.3.9 Demand response enabling device (DRED)
1.3.10 Demand response event
1.3.11 Demand response interface
1.3.12 Demand response mode (DRM)
1.3.13 Electrical product
1.3.14 Extra low voltage
1.3.15 Multi-interface DRED
1.3.16 Multi-part DRED
1.3.17 Operational instruction (OI)
1.3.18 Operational instruction group (OI Group)
1.3.19 Remote agent
1.3.20 Reset
1.3.21 RJ45 Connector
1.3.22 Safety extra-low voltage (SELV)
1.3.23 Shall
1.3.24 Should
1.3.25 Standby power
1.3.26 Switch
1.3.27 User
1.3.28 User operation
1.3.29 User over-ride
SECTION 2 DEMAND RESPONSE FRAMEWORK
2.1 GENERAL
2.2 DEMAND RESPONSE SYSTEM
SECTION 3 MINIMUM REQUIREMENTS OF A DRED
3.1 GENERAL
3.2 MINIMUM CAPABILITIES AND REQUIREMENTS
3.3 COMMANDS AND OPERATIONAL INSTRUCTIONS
3.3.1 Event commands
3.3.2 Operational instructions
3.4 PHYSICAL AND ELECTRICAL REQUIREMENTS
3.4.1 Interface
3.4.2 RJ45 Connector
3.4.3 Circuit to DRED
3.4.4 Power supply to DRED
3.4.5 Installation, location and access
3.4.6 Means for reset by authorized person
3.4.7 User over-ride
3.4.8 Interface adaptor
SECTION 4 OPTIONAL CAPABILITIES OF A DRED
4.1 GENERAL
4.2 RECORDING CONNECTED ELECTRICAL PRODUCTS
4.3 TWO-WAY COMMUNICATIONS
4.4 STANDARD DIMENSIONAL CONSTRAINTS
SECTION 5 LABELLING AND MARKING
5.1 GENERAL
5.2 REGISTRATION
5.3 POINT OF SALE LABELLING
5.4 MARKING
5.4.1 Marking of DREDs
5.4.2 Marking of adapters
5.5 DOCUMENTATION
SECTION 6 TESTING AND VERIFICATION
6.1 GENERAL
6.2 SET-UP FOR TESTING
6.2.1 Set-up for DRED
6.2.2 Set-up for demand response interfaces
6.3 TESTING AND COMPLIANCE REPORT
APPENDIX A - STATEMENTS OF COMPLIANCE AND TEST REPORTS
APPENDIX B - CLASS B DRED (ZIGBEE SEP 1.1.X ENABLED)
B1 GENERAL
B2 DEFINITIONS
B3 PROVISIONING AND COMMISSIONING
B4 TIME
B5 FREQUENCY AGILITY
B6 DIAGNOSTIC CAPABILITIES
B7 COMMAND 'PAYLOAD' FORMAT
B8 CLIENT CLUSTER ATTRIBUTES
APPENDIX C - CLASS C DRED (RIPPLE CONTROL ENABLED)
C1 GENERAL
C2 DEFINITIONS
C3 DESIGNATION AND MARKING
C4 COMMAND FORMAT
C5 RECORDING RIPPLE CONTROL TELEGRAMS
APPENDIX D - EXAMPLE OF CIRCUIT WITH SIX PIN CONNECTIONS
AS/NZS 4755.1:2017
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.