Skip to main content

ISO 11336-1:2023

Current Date published:

Large yachts — Strength, weathertightness and watertightness of glazed openings — Part 1: Design criteria, materials, framing and testing of independent glazed openings

This document specifies technical requirements for independent glazed openings on large yachts, taking into account navigation conditions, the location of the opening and the materials, framing and testing.

Large yachts are yachts with length of the hull, LH, higher or equal to 24 m, used for sport or pleasure and commercial operations.

This document is suitable for the design of glazed openings on all large yachts. However, where yachts carry more than 12 passengers, the additional requirements (set by the appropriate marine administration) for fire integrity and damage stability are outside the scope of this standard.

The opening and the associated closing appliances considered in this document are only those that are above the deepest waterline (dsw) and are critical for the ship integrity related to weathertightness and watertightness, i.e. those that can lead to ingress of water in the hull in case of rupture, dislocation or loss of the pane or its mounting. This document is related and limited to independent glazed openings in which the pane is supported solely by simple linear support at the edges. Glazing in which the rotation at the edges is constrained more than it would be by a single bond line is not covered by this document. This document, excluding annexes, is limited to glazing of any shape, which is simply supported along all edges. Horizontally positioned glazing is excluded.

NOTE       This document is based on the experience of ship window and glass manufacturers, shipbuilders and authorities who apply to ships the regulations of SOLAS, as amended[7], and of the International Convention of Load Lines, as amended[6], noting the provisions by the SOLAS Protocol of 1988, Article 8, as agreed by the appropriate Marine Administration, and on the experience gained with application of the Large Commercial Yacht Code and the REG Yacht Code[16].

Get this standard Prices exclude GST
PDF ( Single user document)
$386.00 NZD
HardCopy
$430.00 NZD
Networkable PDF
Price varies
Preview only close
Prev {{ page }}/ {{ numPages }} Next
Preview only close
Prev {{ page }}/ {{ numPages }} Next
Pages: 59

Previous versions

Keep me up-to-date

Sign up to receive updates when there are changes to this standard

Related Information

Similar Standards

  • BS EN ISO 19019:2005

    Sea-going vessels and marine technology. Instructions for planning, carrying out and reporting sea trials

  • BS EN ISO 8385:2018

    Ships and marine technology. Dredgers. Classification

  • BS IEC 61108-6:2023

    Maritime navigation and radiocommunication equipment and systems. Global navigation satellite systems (GNSS), Navigation with Indian constellation (NavIC)/Indian regional navigation satellite system (IRNSS). Receiver equipment. Performance requirements, m

  • BS ISO 11209:2012

    Ships and marine technology. Large yachts. Deck crane and access gangways strength requirements

Preview only close
Prev {{ page }}/ {{ numPages }} Next
Preview only close
Prev {{ page }}/ {{ numPages }} Next
Pages: 59

Previous versions

ISO 11336-1:2023

Get this standard Prices exclude GST
PDF ( Single user document)
$386.00 NZD
HardCopy
$430.00 NZD
Networkable PDF
Price varies

Request to add this standard to your subscription

ISO 11336-1:2023

Price varies
Online library subscription

Your organisation’s Account Administrator must approve a request to add a standard to your subscription.

You may add a comment to the administrator below.

Cancel