ISO 11336-1:2012
Large yachts — Strength, weathertightness and watertightness of glazed openings — Part 1: Design criteria, materials, framing and testing of independent glazed openings
ISO 11336-1:2012 specifies technical requirements for glazed openings on large yachts, taking into account navigation conditions, and the location of the opening.
Large yachts are yachts with length of the hull, LH, higher or equal to 24 m, in use for sport or pleasure and commercial operations, with a tonnage limitation up to 3 000 gross tonnage, according to the International Tonnage Convention.
The opening and the associated closing appliances considered in ISO 11336-1:2012 are only those that are above the deepest waterline (dsw) and are critical for the ship integrity related to weathertightness and watertightness, i.e. those that could lead to ingress of water in the hull in case of rupture of the pane.
The scope of ISO 11336-1:2012 is related to and limited to independent glazed openings.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$126.00 NZD
|
|
| HardCopy |
$173.00 NZD
|
|
| Networkable PDF |
Price varies
|
CVP_Secretariat_Loca
Annex G (informative) Design pressure in lieu of storm shutters
Annex H (normative) Effective width of plating
Bibliography
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Design criteria
5.1 General
5.2 Strength
5.3 Watertightness
5.4 Weathertightness
5.5 Design loads
5.6 Scantling determination of panes
6 Framing
6.1 Framing types
6.2 Framing dimensions
6.3 Support pads
6.4 Material requirements for the framing
7 Materials
7.1 Materials selection
7.2 Testing of materials
7.3 Testing of appliances
8 Storm shutters and deadlights
8.1 Storm shutters
8.2 Deadlights
8.3 Owner’s manual
Annex A (normative) Unsupported pane dimensions
Annex B (normative) Calculation of the stiffness of a pane
Annex C (informative) Scantling equation
Annex D (informative) Statistical coefficient Kn and worked example
Annex E (informative) Worked examples of equivalent thickness calculation for Type A laminates
Annex F (informative) Worked examples of equivalent thickness calculation for Type B laminates
Annex G (informative) Design pressure in lieu of storm shutters
Annex H (normative) Effective width of plating
Bibliography
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
BS EN ISO 19019:2005
Sea-going vessels and marine technology. Instructions for planning, carrying out and reporting sea trials
-
BS EN ISO 8385:2018
Ships and marine technology. Dredgers. Classification
-
BS IEC 61108-6:2023
Maritime navigation and radiocommunication equipment and systems. Global navigation satellite systems (GNSS), Navigation with Indian constellation (NavIC)/Indian regional navigation satellite system (IRNSS). Receiver equipment. Performance requirements, m
-
BS ISO 11209:2012
Ships and marine technology. Large yachts. Deck crane and access gangways strength requirements
CVP_Secretariat_Loca
Annex G (informative) Design pressure in lieu of storm shutters
Annex H (normative) Effective width of plating
Bibliography
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Design criteria
5.1 General
5.2 Strength
5.3 Watertightness
5.4 Weathertightness
5.5 Design loads
5.6 Scantling determination of panes
6 Framing
6.1 Framing types
6.2 Framing dimensions
6.3 Support pads
6.4 Material requirements for the framing
7 Materials
7.1 Materials selection
7.2 Testing of materials
7.3 Testing of appliances
8 Storm shutters and deadlights
8.1 Storm shutters
8.2 Deadlights
8.3 Owner’s manual
Annex A (normative) Unsupported pane dimensions
Annex B (normative) Calculation of the stiffness of a pane
Annex C (informative) Scantling equation
Annex D (informative) Statistical coefficient Kn and worked example
Annex E (informative) Worked examples of equivalent thickness calculation for Type A laminates
Annex F (informative) Worked examples of equivalent thickness calculation for Type B laminates
Annex G (informative) Design pressure in lieu of storm shutters
Annex H (normative) Effective width of plating
Bibliography