AS/NZS 4034.1:2008
Motor vehicles - Cargo barriers for occupant protection - Cargo barriers
Provides manufacturers, suppliers and users with the requirements for cargo barriers in order to protect the passengers and drivers, in the event of a collision, when seated in front of cargo in a motor vehicle.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$117.00 NZD
|
|
| HardCopy |
$130.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 4034.1:2008 MOTOR VEHICLES-CARGO BARRIERS FOR OCCUPANT PROTECTION - CARGO BARRIERS
PREFACE
CONTENTS
FOREWORD
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 REFERENCED DOCUMENTS
1.3 DEFINITIONS
1.3.1 Anchorage
1.3.2 Cargo barrier
1.3.3 Front (of cargo barrier)
1.3.4 Opening (of a vehicle)
1.3.5 Shall
1.3.6 Should
1.4 CONFIGURATIONS
1.5 RATING
1.6 MARKING
1.6.1 Colour of plaque or label
1.6.2 Information to be included on plaque or label
1.6.3 Additional plaque or label
1.7 PACKAGING
1.7.1 General
1.7.2 User instructions
SECTION 2 DESIGN AND INSTALLATION REQUIREMENTS
2.1 GENERAL
2.2 DEFORMATION
2.3 MEANS OF ESCAPE
2.4 ANCHORAGES
2.5 HEAD RESTRAINTS
2.6 SEAT BELT CLEARANCE
2.7 CHILD RESTRAINT DEVICE (CRD) INSTALLATION
2.7.1 General
2.7.2 Child restraint upper anchorage strap cut-outs
2.8 ATTACHMENTS
2.9 CLEARANCE BETWEEN CARGO BARRIER AND VEHICLE
2.10 FRAME MEMBERS
2.11 HEIGHT ADJUSTMENT IN MULTI-POSITION CARGO BARRIER
2.12 WINDOW IN CARGO BARRIER
2.13 CONSTRUCTION REQUIREMENTS
2.14 DOOR IN CARGO BARRIER
2.15 CARGO BARRIERS FOR VEHICLES FITTED WITH SIDE AIRBAGS
SECTION 3 PERFORMANCE REQUIREMENTS
3.1 IMPACT STRENGTH
3.2 ENERGY LEVEL FOR IMPACT TESTING
3.3 PENETRATION
3.4 GLARE
APPENDIX A - HORIZONTAL TESTS
A1 SCOPE
A2 PRINCIPLE
A3 APPARATUS
A4 TEST SPECIMEN
A5 TEST MASS POSITION
A6 PROCEDURES
A6.1 General
A6.2 Full frontal test
A6.3 Sled test
A7 REPORT
APPENDIX B - DROP TEST
B1 SCOPE
B2 PRINCIPLE
B3 APPARATUS
B4 REQUIREMENTS
B5 TEST MASS
B5.1 General
B5.2 Design requirements
B6 SUPPORT FRAME
B6.1 General
B6.2 Design requirements
B6.3 Anchorage simulation
B6.4 Adjusting the support frame to suit a cargo barrier prior to drop testing
B6.5 Support frame mass
B7 BODY SHELL
B7.1 General
B7.2 Preparation of partial body shell
B8 TEST SPECIMEN
B9 TEST RIG
B9.1 General
B9.2 Release mechanism
B9.3 Supporting structure
B9.4 Platform
B10 PROCEDURE
B11 REPORT
APPENDIX C - PENETRATION TEST
C1 SCOPE
C2 PRINCIPLE
C3 APPARATUS
C4 TEST SPECIMEN
C5 TEST POINT LOCATIONS
C6 FORCE RAM
C7 PROCEDURE
C8 REPORT
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
References
Motor vehicles - Cargo barriers for occupant protection - Partial cargo barriers
Related Information
Land Transport Rule 31001: Passenger Service Vehicles 1999
Ministry: NZ Transport Agency
Section: 6.8(2)
Citation context:(c) a cargo barrier that is fit for purpose, which may be demonstrated by compliance with the version of Australian Standard/New Zealand Standard 4034 that was applicable at the time the cargo barrier was installed.
Similar Standards
-
AS/NZS 1753:2015
Webbing for restraining devices for occupants of motor vehicles -
AS/NZS 1754:2024
Child Restraint Systems for Use in Motor Vehicles
-
AS/NZS 2596:2003
Seat belt assemblies for motor vehicles
-
AS/NZS 3629.1:2024
Methods of Testing Child Restraints, Method 1: Dynamic Testing
AS/NZS 4034.1:2008 MOTOR VEHICLES-CARGO BARRIERS FOR OCCUPANT PROTECTION - CARGO BARRIERS
PREFACE
CONTENTS
FOREWORD
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 REFERENCED DOCUMENTS
1.3 DEFINITIONS
1.3.1 Anchorage
1.3.2 Cargo barrier
1.3.3 Front (of cargo barrier)
1.3.4 Opening (of a vehicle)
1.3.5 Shall
1.3.6 Should
1.4 CONFIGURATIONS
1.5 RATING
1.6 MARKING
1.6.1 Colour of plaque or label
1.6.2 Information to be included on plaque or label
1.6.3 Additional plaque or label
1.7 PACKAGING
1.7.1 General
1.7.2 User instructions
SECTION 2 DESIGN AND INSTALLATION REQUIREMENTS
2.1 GENERAL
2.2 DEFORMATION
2.3 MEANS OF ESCAPE
2.4 ANCHORAGES
2.5 HEAD RESTRAINTS
2.6 SEAT BELT CLEARANCE
2.7 CHILD RESTRAINT DEVICE (CRD) INSTALLATION
2.7.1 General
2.7.2 Child restraint upper anchorage strap cut-outs
2.8 ATTACHMENTS
2.9 CLEARANCE BETWEEN CARGO BARRIER AND VEHICLE
2.10 FRAME MEMBERS
2.11 HEIGHT ADJUSTMENT IN MULTI-POSITION CARGO BARRIER
2.12 WINDOW IN CARGO BARRIER
2.13 CONSTRUCTION REQUIREMENTS
2.14 DOOR IN CARGO BARRIER
2.15 CARGO BARRIERS FOR VEHICLES FITTED WITH SIDE AIRBAGS
SECTION 3 PERFORMANCE REQUIREMENTS
3.1 IMPACT STRENGTH
3.2 ENERGY LEVEL FOR IMPACT TESTING
3.3 PENETRATION
3.4 GLARE
APPENDIX A - HORIZONTAL TESTS
A1 SCOPE
A2 PRINCIPLE
A3 APPARATUS
A4 TEST SPECIMEN
A5 TEST MASS POSITION
A6 PROCEDURES
A6.1 General
A6.2 Full frontal test
A6.3 Sled test
A7 REPORT
APPENDIX B - DROP TEST
B1 SCOPE
B2 PRINCIPLE
B3 APPARATUS
B4 REQUIREMENTS
B5 TEST MASS
B5.1 General
B5.2 Design requirements
B6 SUPPORT FRAME
B6.1 General
B6.2 Design requirements
B6.3 Anchorage simulation
B6.4 Adjusting the support frame to suit a cargo barrier prior to drop testing
B6.5 Support frame mass
B7 BODY SHELL
B7.1 General
B7.2 Preparation of partial body shell
B8 TEST SPECIMEN
B9 TEST RIG
B9.1 General
B9.2 Release mechanism
B9.3 Supporting structure
B9.4 Platform
B10 PROCEDURE
B11 REPORT
APPENDIX C - PENETRATION TEST
C1 SCOPE
C2 PRINCIPLE
C3 APPARATUS
C4 TEST SPECIMEN
C5 TEST POINT LOCATIONS
C6 FORCE RAM
C7 PROCEDURE
C8 REPORT
Previous versions
AS/NZS 4034.1:2008
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.