AS/NZS 4034.1:1998
Motor vehicles - Cargo barriers for occupant protection - Cargo barriers
Specifies requirements for cargo barriers, and their design, installation and usage in vehicles for the protection of occupants sharing the same interior space. It applies to dividing structures intended to reduce injuries to occupants caused by the cargo shifting under both crash and normal operating conditions.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$123.30 NZD
|
|
| HardCopy |
$137.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 4034.1:1998 MOTOR VEHICLES - CARGO BARRIERS FOR OCCUPANT PROTECTION - CARGO BARRIERS
PREFACE
CONTENTS
FOREWORD
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 REFERENCED DOCUMENTS
1.3 DEFINITIONS
1.3.1 Anchorage
1.3.2 Cargo barrier
1.3.3 Front (of cargo barrier)
1.3.4 Opening (of a vehicle)
1.3.5 Shall
1.3.6 Should
1.4 CARGO BARRIER CONFIGURATIONS
1.5 RATING
1.6 MARKING
1.6.1 Colour of plaque or label
1.6.2 Information to be included on plaque or label
1.6.3 Additional plaque or label
1.7 PACKAGING
1.7.1 General
1.7.2 Installation instructions
SECTION 2 DESIGN AND INSTALLATION REQUIREMENTS
2.1 GENERAL
2.2 CARGO BARRIER ATTACHMENT
2.3 ANCHORAGES
2.4 LOCATION OF CARGO BARRIER
2.5 SEAT BELT CLEARANCE
2.6 CHILD RESTRAINT DEVICE (CRD) INSTALLATION
2.6.1 General
2.6.2 Child restraint upper anchorage strap cut-outs
2.7 ATTACHMENTS
2.8 CLEARANCE BETWEEN CARGO BARRIER AND VEHICLE
2.9 FRAME MEMBERS
2.10 HEIGHT ADJUSTMENT IN MULTI-POSITION CARGO BARRIER
2.11 WINDOW IN CARGO BARRIER
2.12 FRONT SURFACE REQUIREMENTS
2.13 DOOR IN CARGO BARRIER
SECTION 3 PERFORMANCE REQUIREMENTS
3.1 IMPACT STRENGTH
3.2 ENERGY LEVEL FOR IMPACT TESTING OF CARGO BARRIER
3.3 PENETRATION STRENGTH
3.4 GLARE
APPENDIX A - HORIZONTAL BARRIER TESTS
A1 SCOPE
A2 PRINCIPLE
A3 APPARATUS
A4 PROCEDURE
A5 REPORT
A6 TEST SPECIMEN
APPENDIX B - DROP TEST - TEST PROCEDURES
B1 SCOPE
B2 PRINCIPLE
B3 APPARATUS
B4 PREPARATION OF TEST MASS
B5 PREPARATION OF SUPPORT FRAME
B6 TEST SPECIMEN
B7 PROCEDURE
B8 REPORT
APPENDIX C - DROP TEST - TEST RIG
C1 SCOPE
C2 GENERAL
C3 RELEASE MECHANISM
C4 SUPPORTING STRUCTURE
C5 PLATFORM
APPENDIX D - IMPACT TEST - DETAILS OF TEST MASS
D1 SCOPE
D2 DESIGN REQUIREMENTS
APPENDIX E - IMPACT TEST - BODY SHELL PREPARATION
E1 SCOPE
E2 PREPARATION OF PARTIAL BODY SHELL
APPENDIX F - IMPACT TEST - SUPPORT FRAME - DESIGN AND USE
F1 SCOPE
F2 GENERAL
F3 DESIGN REQUIREMENTS OF THE CARGO BARRIER SUPPORT FRAME
F4 ANCHORAGE SIMULATION
F5 ADJUSTING THE SUPPORT FRAME TO SUIT A CARGO BARRIER PRIOR TO IMPACT TESTING
F6 SUPPORT FRAME MASS
APPENDIX G - PENETRATION TEST
G1 SCOPE
G2 PRINCIPLE
G3 APPARATUS
G4 TEST SPECIMEN
G5 TEST POINT LOCATIONS
G6 FORCE RAM
G7 PROCEDURE
G8 REPORT
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Land Transport Rule 31001: Passenger Service Vehicles 1999
Ministry: NZ Transport Agency
Section: 6.8(2)
Citation context:(c) a cargo barrier that is fit for purpose, which may be demonstrated by compliance with the version of Australian Standard/New Zealand Standard 4034 that was applicable at the time the cargo barrier was installed.
Similar Standards
-
AS/NZS 1753:2015
Webbing for restraining devices for occupants of motor vehicles -
AS/NZS 1754:2024
Child Restraint Systems for Use in Motor Vehicles
-
AS/NZS 2596:2003
Seat belt assemblies for motor vehicles
-
AS/NZS 3629.1:2024
Methods of Testing Child Restraints, Method 1: Dynamic Testing
AS/NZS 4034.1:1998 MOTOR VEHICLES - CARGO BARRIERS FOR OCCUPANT PROTECTION - CARGO BARRIERS
PREFACE
CONTENTS
FOREWORD
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 REFERENCED DOCUMENTS
1.3 DEFINITIONS
1.3.1 Anchorage
1.3.2 Cargo barrier
1.3.3 Front (of cargo barrier)
1.3.4 Opening (of a vehicle)
1.3.5 Shall
1.3.6 Should
1.4 CARGO BARRIER CONFIGURATIONS
1.5 RATING
1.6 MARKING
1.6.1 Colour of plaque or label
1.6.2 Information to be included on plaque or label
1.6.3 Additional plaque or label
1.7 PACKAGING
1.7.1 General
1.7.2 Installation instructions
SECTION 2 DESIGN AND INSTALLATION REQUIREMENTS
2.1 GENERAL
2.2 CARGO BARRIER ATTACHMENT
2.3 ANCHORAGES
2.4 LOCATION OF CARGO BARRIER
2.5 SEAT BELT CLEARANCE
2.6 CHILD RESTRAINT DEVICE (CRD) INSTALLATION
2.6.1 General
2.6.2 Child restraint upper anchorage strap cut-outs
2.7 ATTACHMENTS
2.8 CLEARANCE BETWEEN CARGO BARRIER AND VEHICLE
2.9 FRAME MEMBERS
2.10 HEIGHT ADJUSTMENT IN MULTI-POSITION CARGO BARRIER
2.11 WINDOW IN CARGO BARRIER
2.12 FRONT SURFACE REQUIREMENTS
2.13 DOOR IN CARGO BARRIER
SECTION 3 PERFORMANCE REQUIREMENTS
3.1 IMPACT STRENGTH
3.2 ENERGY LEVEL FOR IMPACT TESTING OF CARGO BARRIER
3.3 PENETRATION STRENGTH
3.4 GLARE
APPENDIX A - HORIZONTAL BARRIER TESTS
A1 SCOPE
A2 PRINCIPLE
A3 APPARATUS
A4 PROCEDURE
A5 REPORT
A6 TEST SPECIMEN
APPENDIX B - DROP TEST - TEST PROCEDURES
B1 SCOPE
B2 PRINCIPLE
B3 APPARATUS
B4 PREPARATION OF TEST MASS
B5 PREPARATION OF SUPPORT FRAME
B6 TEST SPECIMEN
B7 PROCEDURE
B8 REPORT
APPENDIX C - DROP TEST - TEST RIG
C1 SCOPE
C2 GENERAL
C3 RELEASE MECHANISM
C4 SUPPORTING STRUCTURE
C5 PLATFORM
APPENDIX D - IMPACT TEST - DETAILS OF TEST MASS
D1 SCOPE
D2 DESIGN REQUIREMENTS
APPENDIX E - IMPACT TEST - BODY SHELL PREPARATION
E1 SCOPE
E2 PREPARATION OF PARTIAL BODY SHELL
APPENDIX F - IMPACT TEST - SUPPORT FRAME - DESIGN AND USE
F1 SCOPE
F2 GENERAL
F3 DESIGN REQUIREMENTS OF THE CARGO BARRIER SUPPORT FRAME
F4 ANCHORAGE SIMULATION
F5 ADJUSTING THE SUPPORT FRAME TO SUIT A CARGO BARRIER PRIOR TO IMPACT TESTING
F6 SUPPORT FRAME MASS
APPENDIX G - PENETRATION TEST
G1 SCOPE
G2 PRINCIPLE
G3 APPARATUS
G4 TEST SPECIMEN
G5 TEST POINT LOCATIONS
G6 FORCE RAM
G7 PROCEDURE
G8 REPORT
AS/NZS 4034.1:1998
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.