AS/NZS 3827.1:1998
Lighting system performance - Accuracies and tolerances - Overview and general recommendations
Identifies the factors that influence variability in lighting performance and gives recommendations on how such variability may be contained within tolerable limits in the specification, calculation and measurement of interior and exterior lighting systems. Provides advice on the comparison of calculated/measured values of lighting parameters with specified or target values, taking into account the uncertainties of calculation/measurement. Sets out typical uncertainties that might be expected for various elements of lighting calculations/measurements, together with total uncertainties for the overall design.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$132.30 NZD
|
|
| HardCopy |
$147.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 3827.1:1998 LIGHTING SYSTEM PERFORMANCE—ACCURACIES AND TOLERANCES—OVERVIEW AND GENERAL RECOMMENDATIONS
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 APPLICATION
1.3 REFERENCED DOCUMENTS
1.4 DEFINITIONS
1.4.1 Accuracy of calculation/measurement
1.4.2 Component uncertainty
1.4.3 Level of confidence
1.4.4 Limiting tolerance
1.4.5 Residual total uncertainty (of measurement)
1.4.6 Specified value
1.4.7 Target value
1.4.8 Tolerance
1.4.9 Total uncertainty
1.4.10 Uncertainty of calculation/measurement
SECTION 2 UNCERTAINTY IN LIGHTING DESIGN AND MEASUREMENT
2.1 UNCERTAINTY IN DESIGN
2.2 ACCURACY
2.3 TOLERANCES
2.4 CENTRALITY OF THE DESIGNER
2.5 STANDARDS AND LIGHT TECHNICAL PARAMETERS
2.6 COMPLIANCE
2.7 ROUNDING OF CALCULATION RESULTS AND LIGHT MEASUREMENTS
2.8 THE FORMAT OF THE STANDARD
SECTION 3 INPUT INFORMATION
3.1 GENERAL
3.2 EQUIPMENT
3.2.1 Manufacture of lighting equipment
3.2.2 Lamp photometric performance data
3.2.3 Luminaire photometric data
3.3 DESIGN AND INSTALLATION DATA
3.3.1 General
3.3.2 Building/site geometry
3.3.3 Luminaire geometry
3.3.4 Light-affecting characteristics of surfaces
3.3.5 Electrical operating characteristics of lighting equipment
3.3.6 Allowances for depreciation of light output
3.3.7 Other factors
SECTION 4 DESIGN METHODS AND SENSITIVITIES
4.1 INTRODUCTION
4.1.1 Interior lighting
4.1.2 Exterior lighting
4.2 POTENTIAL VARIATIONS
4.2.1 Photometric information
4.2.2 Space characteristics
4.2.3 Calculation methods
4.2.4 Algorithms
4.2.5 Limitations of calculation methods
4.2.6 Equipment
4.2.7 Maintenance
4.3 PARAMETERS AFFECTED
4.4 RELATIONSHIP BETWEEN CALCULATED AND MEASURED VALUES
4.5 RESPONSIBILITY AND ASSESSMENT OF PERFORMANCE VARIATIONS
SECTION 5 DESIGN DOCUMENTATION
5.1 INTRODUCTION
5.2 DESIGN CALCULATIONS
5.3 INSTALLATION DOCUMENTATION
5.4 INFORMATION FOR THE CLIENT
5.5 STATEMENT OF DESIGN EFFECTS
5.6 DEVIATIONS FROM THE DESIGN EXPECTATIONS
SECTION 6 INSTALLATION
6.1 INTRODUCTION
6.2 LIGHTING SYSTEM COMPONENTS
6.3 PHYSICAL COORDINATION
6.4 ENVIRONMENTAL AND SITE CONDITIONS
SECTION 7 VERIFICATION
7.1 GENERAL
7.2 VERIFICATION BASED ON PHYSICAL ASSESSMENT
7.3 VERIFICATION BASED ON LIGHTING MEASUREMENTS
7.3.1 General requirements
7.3.2 Measurement grid
7.3.3 Sources of error
7.4 DEVIATIONS FROM DESIGN EXPECTATIONS
7.5 COMPLIANCE WITH DESIGN
SECTION 8 LIGHTING SYSTEM MANAGEMENT
8.1 INTRODUCTION
8.2 MAINTENANCE MANUALS AND RECORDS
8.3 MEASUREMENT OF ILLUMINANCE
8.4 LAMP REPLACEMENT PROGRAMS
8.5 VARIABLE OUTPUT LIGHTING CONTROL SYSTEMS
SECTION 9 EXPECTED ACCURACIES
9.1 INTRODUCTION
9.2 ASSESSMENT OF ACCURACY
9.3 EXPECTED ACCURACIES OF ELEMENTS OF CALCULATION
9.3.1 General
9.3.2 Photometric data
9.3.3 Manufacture
9.3.4 Design and installation
9.4 EXPECTED TOTAL UNCERTAINTY IN CALCULATION
9.5 EXPECTED ACCURACY IN MEASUREMENT
9.5.1 General
9.5.2 Sources of uncertainty
9.5.3 Expected total uncertainty
9.5.4 Treatment of indeterminate values in measurement
APPENDIX A - BIBLIOGRAPHY
APPENDIX B - METHODS OF CALCULATING UNCERTAINTIES AND COMPARING MEASURED AND CALCULATED VALUES
B1 SCOPE
B2 COMPARISON OF MEASURED AND SPECIFIED LIGHTING VALUES
B3 COMPARISON OF MEASURED VALUE WITH A LIGHTING TOLERANCE
B4 ASSESSMENT OF UNCERTAINTY IN CALCULATION AND MEASURE- MENT
B4.1 General
B4.2 Types of uncertainty
B4.3 The statement of uncertainty
B4.4 Assessment of total uncertainty
APPENDIX C - GUIDE TO INFORMATION THAT THE CLIENT MIGHT NEED TO PROVIDE AS AN INPUT TO LIGHTING DESIGN
C1 INTRODUCTION
C2 INDOOR LIGHTING SYSTEMS
C2.1 General
C2.2 Occupational health and safety requirements
C2.3 Building details
C2.4 Fitout details
C2.5 Planned maintenance regime
C2.6 Other factors
C3 OUTDOOR LIGHTING SYSTEMS
C3.1 General
C3.2 Occupational health and safety requirements
C3.3 Installation details
APPENDIX D - ESTIMATION OF TOTAL UNCERTAINTY IN LIGHTING CALCULATIONS
D1 SCOPE
D2 SENSITIVITY TO ERROR
D3 ESTIMATION OF TOTAL UNCERTAINTY
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 4879.1:2008
Performance of transformers and electronic step-down convertors for ELV lamps - Test method - Energy performance
-
AS/NZS 4879.2:2010
Performance of transformers and electronic step-down convertors for ELV lamps - Minimum Energy Performance Standards (MEPS) requirements
-
BS EN 12193:2018
Light and lighting. Sports lighting
-
BS EN 12665:2018 - TC
Tracked Changes. Light and lighting. Basic terms and criteria for specifying lighting requirements
AS/NZS 3827.1:1998 LIGHTING SYSTEM PERFORMANCE—ACCURACIES AND TOLERANCES—OVERVIEW AND GENERAL RECOMMENDATIONS
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 APPLICATION
1.3 REFERENCED DOCUMENTS
1.4 DEFINITIONS
1.4.1 Accuracy of calculation/measurement
1.4.2 Component uncertainty
1.4.3 Level of confidence
1.4.4 Limiting tolerance
1.4.5 Residual total uncertainty (of measurement)
1.4.6 Specified value
1.4.7 Target value
1.4.8 Tolerance
1.4.9 Total uncertainty
1.4.10 Uncertainty of calculation/measurement
SECTION 2 UNCERTAINTY IN LIGHTING DESIGN AND MEASUREMENT
2.1 UNCERTAINTY IN DESIGN
2.2 ACCURACY
2.3 TOLERANCES
2.4 CENTRALITY OF THE DESIGNER
2.5 STANDARDS AND LIGHT TECHNICAL PARAMETERS
2.6 COMPLIANCE
2.7 ROUNDING OF CALCULATION RESULTS AND LIGHT MEASUREMENTS
2.8 THE FORMAT OF THE STANDARD
SECTION 3 INPUT INFORMATION
3.1 GENERAL
3.2 EQUIPMENT
3.2.1 Manufacture of lighting equipment
3.2.2 Lamp photometric performance data
3.2.3 Luminaire photometric data
3.3 DESIGN AND INSTALLATION DATA
3.3.1 General
3.3.2 Building/site geometry
3.3.3 Luminaire geometry
3.3.4 Light-affecting characteristics of surfaces
3.3.5 Electrical operating characteristics of lighting equipment
3.3.6 Allowances for depreciation of light output
3.3.7 Other factors
SECTION 4 DESIGN METHODS AND SENSITIVITIES
4.1 INTRODUCTION
4.1.1 Interior lighting
4.1.2 Exterior lighting
4.2 POTENTIAL VARIATIONS
4.2.1 Photometric information
4.2.2 Space characteristics
4.2.3 Calculation methods
4.2.4 Algorithms
4.2.5 Limitations of calculation methods
4.2.6 Equipment
4.2.7 Maintenance
4.3 PARAMETERS AFFECTED
4.4 RELATIONSHIP BETWEEN CALCULATED AND MEASURED VALUES
4.5 RESPONSIBILITY AND ASSESSMENT OF PERFORMANCE VARIATIONS
SECTION 5 DESIGN DOCUMENTATION
5.1 INTRODUCTION
5.2 DESIGN CALCULATIONS
5.3 INSTALLATION DOCUMENTATION
5.4 INFORMATION FOR THE CLIENT
5.5 STATEMENT OF DESIGN EFFECTS
5.6 DEVIATIONS FROM THE DESIGN EXPECTATIONS
SECTION 6 INSTALLATION
6.1 INTRODUCTION
6.2 LIGHTING SYSTEM COMPONENTS
6.3 PHYSICAL COORDINATION
6.4 ENVIRONMENTAL AND SITE CONDITIONS
SECTION 7 VERIFICATION
7.1 GENERAL
7.2 VERIFICATION BASED ON PHYSICAL ASSESSMENT
7.3 VERIFICATION BASED ON LIGHTING MEASUREMENTS
7.3.1 General requirements
7.3.2 Measurement grid
7.3.3 Sources of error
7.4 DEVIATIONS FROM DESIGN EXPECTATIONS
7.5 COMPLIANCE WITH DESIGN
SECTION 8 LIGHTING SYSTEM MANAGEMENT
8.1 INTRODUCTION
8.2 MAINTENANCE MANUALS AND RECORDS
8.3 MEASUREMENT OF ILLUMINANCE
8.4 LAMP REPLACEMENT PROGRAMS
8.5 VARIABLE OUTPUT LIGHTING CONTROL SYSTEMS
SECTION 9 EXPECTED ACCURACIES
9.1 INTRODUCTION
9.2 ASSESSMENT OF ACCURACY
9.3 EXPECTED ACCURACIES OF ELEMENTS OF CALCULATION
9.3.1 General
9.3.2 Photometric data
9.3.3 Manufacture
9.3.4 Design and installation
9.4 EXPECTED TOTAL UNCERTAINTY IN CALCULATION
9.5 EXPECTED ACCURACY IN MEASUREMENT
9.5.1 General
9.5.2 Sources of uncertainty
9.5.3 Expected total uncertainty
9.5.4 Treatment of indeterminate values in measurement
APPENDIX A - BIBLIOGRAPHY
APPENDIX B - METHODS OF CALCULATING UNCERTAINTIES AND COMPARING MEASURED AND CALCULATED VALUES
B1 SCOPE
B2 COMPARISON OF MEASURED AND SPECIFIED LIGHTING VALUES
B3 COMPARISON OF MEASURED VALUE WITH A LIGHTING TOLERANCE
B4 ASSESSMENT OF UNCERTAINTY IN CALCULATION AND MEASURE- MENT
B4.1 General
B4.2 Types of uncertainty
B4.3 The statement of uncertainty
B4.4 Assessment of total uncertainty
APPENDIX C - GUIDE TO INFORMATION THAT THE CLIENT MIGHT NEED TO PROVIDE AS AN INPUT TO LIGHTING DESIGN
C1 INTRODUCTION
C2 INDOOR LIGHTING SYSTEMS
C2.1 General
C2.2 Occupational health and safety requirements
C2.3 Building details
C2.4 Fitout details
C2.5 Planned maintenance regime
C2.6 Other factors
C3 OUTDOOR LIGHTING SYSTEMS
C3.1 General
C3.2 Occupational health and safety requirements
C3.3 Installation details
APPENDIX D - ESTIMATION OF TOTAL UNCERTAINTY IN LIGHTING CALCULATIONS
D1 SCOPE
D2 SENSITIVITY TO ERROR
D3 ESTIMATION OF TOTAL UNCERTAINTY
AS/NZS 3827.1:1998
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.