AS/NZS 4879.1:2008
Performance of transformers and electronic step-down convertors for ELV lamps - Test method - Energy performance
Provides the industry, consumers, test laboratories, regulators and users of transformers and electronic step-down converters used with ELV lamps with a test method to determine energy efficiency.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$123.30 NZD
|
|
| HardCopy |
$137.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 4879.1:2008 PERFORMANCE OF TRANSFORMERS AND ELECTRONIC STEP-DOWN CONVERTORS FOR ELV LAMPS - TEST METHOD-ENERGY...
PREFACE
CONTENTS
FOREWORD
1 SCOPE AND GENERAL
1.1 SCOPE
1.2 EXCLUSION
2 REFERENCED DOCUMENTS
3 DEFINITIONS
3.1 Extra-low voltage (ELV)
3.2 Extra-low voltage lighting convertor (ELC)
3.3 Equipment under test (EUT)
3.4 Active mode efficiency
3.5 Power
3.6 Ambient temperature
3.7 Nameplate input frequency
3.8 Nameplate input voltage
3.9 Nameplate output power (Pno)
3.10 Nameplate output voltage
3.11 Safety extra-low voltage (SELV)
3.12 Class III luminaire
3.13 Stabilized temperature
3.14 Stabilized output frequency
3.15 Total harmonic distortion (THD)
3.16 Uncertainty
4 GENERAL CONDITIONS FOR TEST AND MEASUREMENT
4.1 General
4.2 Rounding
4.3 Test room
4.4 Test voltage
4.5 a.c. reference source
4.6 Test lamps
4.7 Thermocouple and temperature indicator
4.8 Measuring instrument
5 COMPATIBILITY WITH ELECTRONIC DIMMER SWITCHES
6 TESTS
6.1 Preparing EUT for test
6.2 Load conditions
6.3 Load test procedure
6.3.1 Full load test
6.3.2 No-load test
6.3.3 Special load test
6.3.4 Data report
6.4 Efficiency determination
6.5 Power consumption determination
7 ENERGY PERFORMANCE MARK
APPENDIX A - ENERGY PERFORMANCE MARK
A1 REQUIREMENT
A2 DESIGN OF THE ENERGY PERFORMANCE MARK
APPENDIX B - DETERMINATION OF UNCERTAINTIES
B1 INTRODUCTION
B2 EQUATIONS
APPENDIX C - EXAMPLES FOR DETERMINATION OF UNCERTAINTY
C1 EXAMPLE 1-88 KHZ CONVERTER WITH MEASURED SPECTRAL OUTPUT POWER
C2 EXAMPLE 2-35 kHz
APPENDIX D - TEST REPORT
D1 GENERAL
D2 INFORMATION
APPENDIX E - SAMPLE TEST REPORT
APPENDIX F - BIBLIOGRAPHY
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 4879.2:2010
Performance of transformers and electronic step-down convertors for ELV lamps - Minimum Energy Performance Standards (MEPS) requirements
-
BS EN 12193:2018
Light and lighting. Sports lighting
-
BS EN 12665:2024
Light and lighting. Basic terms and criteria for specifying lighting requirements
-
BS EN 12665:2024 - TC
Tracked Changes. Light and lighting. Basic terms and criteria for specifying lighting requirements
AS/NZS 4879.1:2008 PERFORMANCE OF TRANSFORMERS AND ELECTRONIC STEP-DOWN CONVERTORS FOR ELV LAMPS - TEST METHOD-ENERGY...
PREFACE
CONTENTS
FOREWORD
1 SCOPE AND GENERAL
1.1 SCOPE
1.2 EXCLUSION
2 REFERENCED DOCUMENTS
3 DEFINITIONS
3.1 Extra-low voltage (ELV)
3.2 Extra-low voltage lighting convertor (ELC)
3.3 Equipment under test (EUT)
3.4 Active mode efficiency
3.5 Power
3.6 Ambient temperature
3.7 Nameplate input frequency
3.8 Nameplate input voltage
3.9 Nameplate output power (Pno)
3.10 Nameplate output voltage
3.11 Safety extra-low voltage (SELV)
3.12 Class III luminaire
3.13 Stabilized temperature
3.14 Stabilized output frequency
3.15 Total harmonic distortion (THD)
3.16 Uncertainty
4 GENERAL CONDITIONS FOR TEST AND MEASUREMENT
4.1 General
4.2 Rounding
4.3 Test room
4.4 Test voltage
4.5 a.c. reference source
4.6 Test lamps
4.7 Thermocouple and temperature indicator
4.8 Measuring instrument
5 COMPATIBILITY WITH ELECTRONIC DIMMER SWITCHES
6 TESTS
6.1 Preparing EUT for test
6.2 Load conditions
6.3 Load test procedure
6.3.1 Full load test
6.3.2 No-load test
6.3.3 Special load test
6.3.4 Data report
6.4 Efficiency determination
6.5 Power consumption determination
7 ENERGY PERFORMANCE MARK
APPENDIX A - ENERGY PERFORMANCE MARK
A1 REQUIREMENT
A2 DESIGN OF THE ENERGY PERFORMANCE MARK
APPENDIX B - DETERMINATION OF UNCERTAINTIES
B1 INTRODUCTION
B2 EQUATIONS
APPENDIX C - EXAMPLES FOR DETERMINATION OF UNCERTAINTY
C1 EXAMPLE 1-88 KHZ CONVERTER WITH MEASURED SPECTRAL OUTPUT POWER
C2 EXAMPLE 2-35 kHz
APPENDIX D - TEST REPORT
D1 GENERAL
D2 INFORMATION
APPENDIX E - SAMPLE TEST REPORT
APPENDIX F - BIBLIOGRAPHY
AS/NZS 4879.1:2008
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.