AS/NZS 3827.2:1998
Lighting system performance - Accuracies and tolerances - Compliance requirements
Sets out requirements applying to verification of compliance of calculated or measured values of lighting parameters, from interior and exterior lighting systems, with specified or target values for these parameters. The requirements are the minimum considered necessary to ensure that calculated or measured values of lighting parameters are of an acceptable accuracy.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$63.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 3827.2:1998 LIGHTING SYSTEM PERFORMANCE—ACCURACIES AND TOLERANCES—COMPLIANCE REQUIREMENTS
PREFACE
CONTENTS
FOREWORD
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 APPLICATION
1.3 REFERENCED DOCUMENTS
1.4 DEFINITIONS
1.4.1 Accuracy of calculation/measurement
1.4.2 Component uncertainty
1.4.3 Level of confidence
1.4.4 Limiting tolerance
1.4.5 Residual total uncertainty (of measurement)
1.4.6 Specified value
1.4.7 Target value
1.4.8 Tolerance
1.4.9 Total uncertainty
1.4.10 Uncertainty of calculation/measurement
1.5 BASIS OF COMPLIANCE
SECTION 2 UNCERTAINTY IN LIGHTING DESIGN AND MEASUREMENT
2.1 ROUNDING OF CALCULATION RESULTS AND LIGHT MEASUREMENTS
2.2 TREATMENT OF INDETERMINATE VALUES IN MEASUREMENT
SECTION 3 INPUT INFORMATION
3.1 MANUFACTURE OF LIGHTING EQUIPMENT
3.2 LAMP AND LUMINAIRE PHOTOMETRIC DATA
SECTION 4 DESIGN METHODS AND SENSITIVITIES
4.1 CALCULATION METHODS
4.2 DESIGN ASSUMPTIONS
4.3 MAINTENANCE ASSUMPTIONS
SECTION 5 DESIGN DOCUMENTATION
5.1 INFORMATION ON DESIGN BASIS
5.2 INSTALLATION DOCUMENTATION
5.3 INFORMATION FOR THE CLIENT
SECTION 6 INSTALLATION
6.1 EVALUATION OF PROPOSED ALTERATIONS
SECTION 7 VERIFICATION
7.1 METHODS OF VERIFICATION
7.2 VERIFICATION BASED ON LIGHTING CALCULATIONS
7.2.1 Required verification checks
7.2.2 Verification report
7.3 VERIFICATION BASED ON LIGHTING MEASUREMENTS
7.3.1 Required verification checks
7.3.2 Verification report
SECTION 8 LIGHTING SYSTEM MANAGEMENT
SECTION 9 EXPECTED ACCURACIES
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
References
International lamp coding system (ILCOS)
Related Information
Similar Standards
-
AS/NZS 4879.1:2008
Performance of transformers and electronic step-down convertors for ELV lamps - Test method - Energy performance
-
AS/NZS 4879.2:2010
Performance of transformers and electronic step-down convertors for ELV lamps - Minimum Energy Performance Standards (MEPS) requirements
-
BS EN 12193:2018
Light and lighting. Sports lighting
-
BS EN 12665:2024
Light and lighting. Basic terms and criteria for specifying lighting requirements
AS/NZS 3827.2:1998 LIGHTING SYSTEM PERFORMANCE—ACCURACIES AND TOLERANCES—COMPLIANCE REQUIREMENTS
PREFACE
CONTENTS
FOREWORD
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 APPLICATION
1.3 REFERENCED DOCUMENTS
1.4 DEFINITIONS
1.4.1 Accuracy of calculation/measurement
1.4.2 Component uncertainty
1.4.3 Level of confidence
1.4.4 Limiting tolerance
1.4.5 Residual total uncertainty (of measurement)
1.4.6 Specified value
1.4.7 Target value
1.4.8 Tolerance
1.4.9 Total uncertainty
1.4.10 Uncertainty of calculation/measurement
1.5 BASIS OF COMPLIANCE
SECTION 2 UNCERTAINTY IN LIGHTING DESIGN AND MEASUREMENT
2.1 ROUNDING OF CALCULATION RESULTS AND LIGHT MEASUREMENTS
2.2 TREATMENT OF INDETERMINATE VALUES IN MEASUREMENT
SECTION 3 INPUT INFORMATION
3.1 MANUFACTURE OF LIGHTING EQUIPMENT
3.2 LAMP AND LUMINAIRE PHOTOMETRIC DATA
SECTION 4 DESIGN METHODS AND SENSITIVITIES
4.1 CALCULATION METHODS
4.2 DESIGN ASSUMPTIONS
4.3 MAINTENANCE ASSUMPTIONS
SECTION 5 DESIGN DOCUMENTATION
5.1 INFORMATION ON DESIGN BASIS
5.2 INSTALLATION DOCUMENTATION
5.3 INFORMATION FOR THE CLIENT
SECTION 6 INSTALLATION
6.1 EVALUATION OF PROPOSED ALTERATIONS
SECTION 7 VERIFICATION
7.1 METHODS OF VERIFICATION
7.2 VERIFICATION BASED ON LIGHTING CALCULATIONS
7.2.1 Required verification checks
7.2.2 Verification report
7.3 VERIFICATION BASED ON LIGHTING MEASUREMENTS
7.3.1 Required verification checks
7.3.2 Verification report
SECTION 8 LIGHTING SYSTEM MANAGEMENT
SECTION 9 EXPECTED ACCURACIES
AS/NZS 3827.2:1998
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.