AS/NZS 3002:2021
AS/NZS 3002:2021 Electrical installations - Shows and carnival events
Standard sets out requirements for the supply of electricity to power consuming devices for: (a) shows, carnivals and events; (b) public events; and (c) limited duration private domestic or private corporate events where attendance is expected to be in excess of 30 people or when staff are employed for the event.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$139.50 NZD
|
|
| HardCopy |
$155.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 3002:2021 Electrical installations - Shows, carnivals and events
Preface
Foreword
Section 1 Scope and general
1.1 Scope
1.1.1 General
1.1.2 Inclusions
1.1.3 Exclusions
1.2 Application
1.3 Normative references
1.4 Terms and definitions
1.5 Alterations and repairs
1.5.1 Alterations
1.5.2 Repairs
Section 2 Installation wiring for shows, carnivals and events
2.1 General
2.2 Method of supply
2.2.1 General
2.2.2 Normal supply
2.2.3 Alternative supply
2.2.4 Standalone supply
2.2.5 Supplementary supply
2.3 Maximum demand
2.4 General arrangement, control and protection
2.4.1 Control and isolation
2.4.2 Overcurrent protection
2.5 Additional protection by residual current devices (RCDs)
2.5.1 Requirements for additional RCD protection
2.5.2 Location of RCD protection
2.6 Switchboards
2.6.1 General
2.6.2 Accessibility
2.6.3 Mounting height
2.6.4 Identification
2.6.5 Strain relief
2.6.6 Isolation devices
2.7 Wiring systems
2.7.1 General
2.7.2 Cable selection
2.7.3 Connection of cables
2.7.4 Underground wiring
2.7.5 Aerial wiring system
2.7.6 Electrical connections
Section 3 Event wiring
3.1 General
3.2 Electrical supply
3.2.1 Supply from electrical installation
3.2.2 Supply by generating system
3.3 Maximum demand
3.4 Event switchboards
3.4.1 Enclosure
3.4.2 Accessibility
3.4.3 Mounting height
3.4.4 Socket-outlets
3.5 Event wiring systems
3.5.1 Cable selection
3.5.2 Connection of cables
3.5.3 Cables installed on ground, floor or platform
3.5.4 Underground wiring
3.5.5 Aerial Wiring
3.5.6 Cables supported by a catenary
3.6 Flexible cords and cord extension sets
3.6.1 General
3.6.2 Event wiring - detachable connections
3.7 Electrical accessories for events
3.7.1 General
3.7.2 ACS for event sites
3.7.3 Auxiliary socket-outlet panels
3.7.4 Outlet boxes
3.7.5 Electrical portable outlet devices
3.8 Electrical equipment for events
3.8.1 General
3.8.2 Electrical accessories
3.8.3 Event lighting
3.8.4 Prohibited zones around gas cylinders
3.9 Riding devices
Section 4 Verification
4.1 General
4.2 In Australia
4.2.1 Initial verification of installation wiring
4.2.2 Initial verification of event wiring
4.2.3 Periodic verification
4.3 In New Zealand
4.3.1 Initial verification
4.3.2 Verification following repairs
4.3.3 Periodic assessment
Appendix A (informative) Electrical installation and event wiring guide
Appendix B (informative) Low voltage event wiring arrangements
Appendix C (normative) Periodic assessment of permanent installation at event venues New Zealand only
Appendix D (normative) Periodic assessment of event wiring New Zealand only
Appendix E (informative) Degrees of protection of enclosed equipment
Appendix F (informative) WS classification of wiring systems
Appendix G (normative) Marking of event switchboards to indicate the presence of live parts
Appendix H (informative) Recommended colours for tags on tested equipment
Bibliography
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
References
Electrical Installations - Transportable structures and vehicles including their site supplies
Electrical installations - Construction and demolition sites
Approval and test specification - Electrical portable outlet devices
Approval and test specification - Portable lamp standards and brackets
Low-voltage switchgear and controlgear assemblies - Particular requirements for assemblies for construction sites (ACS)
Electric cables - Polymeric insulated - Multicore control cables
Luminaires - Part 2.1: Particular requirements - Fixed general purpose luminaires
Luminaires - Part 2.10: Particular requirements - Portable luminaires for children
Luminaires - Part 2.12: Particular requirements - Mains socket-outlet mounted nightlights
Luminaires - Part 2.17: Particular requirements - Luminaires for stage lighting, television and film studios (outdoor and indoor)
Luminaires - Particular requirements - Luminaires for swimming pools and similar applications
Luminaires - Particular requirements - Air handling luminaries (safety requirements)
Luminaires - Part 2.2: Particular requirements - Recessed luminaires
Luminaires - Part 2.20: Particular requirements - Lighting chains
Luminaires - Part 2.21: Particular requirements - Rope lights
Luminaires - Particular requirements - Luminaires for emergency lighting
Luminaires - Particular requirements - Extra low voltage lighting systems for filament lamps
Luminaires - Particular requirements - Luminaires for use in clinical areas of hospitals and health care buildings
Luminaires - Particular requirements - Luminaires with built-in transformers for filament lamps
Luminaires - Part 2.8: Particular requirements - Handlamps
Luminaires - Particular requirements - Photo and film luminaires (non-professional)
Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS)
Related Information
Similar Standards
-
AS/NZS 3004.1:2014
Electrical installations - Marinas and boats - Part 1: Marinas -
AS/NZS 3004.2:2014
Electrical installations - Marinas and boats - Part 2: Boat installations
-
AS/NZS 3004.2:2014 A1
Electrical installations - Marinas and boats - Part 2: Boat installations: Amendment 1:2015 -
AS/NZS 3012:2019
Electrical installations - Construction and demolition sites
AS/NZS 3002:2021 Electrical installations - Shows, carnivals and events
Preface
Foreword
Section 1 Scope and general
1.1 Scope
1.1.1 General
1.1.2 Inclusions
1.1.3 Exclusions
1.2 Application
1.3 Normative references
1.4 Terms and definitions
1.5 Alterations and repairs
1.5.1 Alterations
1.5.2 Repairs
Section 2 Installation wiring for shows, carnivals and events
2.1 General
2.2 Method of supply
2.2.1 General
2.2.2 Normal supply
2.2.3 Alternative supply
2.2.4 Standalone supply
2.2.5 Supplementary supply
2.3 Maximum demand
2.4 General arrangement, control and protection
2.4.1 Control and isolation
2.4.2 Overcurrent protection
2.5 Additional protection by residual current devices (RCDs)
2.5.1 Requirements for additional RCD protection
2.5.2 Location of RCD protection
2.6 Switchboards
2.6.1 General
2.6.2 Accessibility
2.6.3 Mounting height
2.6.4 Identification
2.6.5 Strain relief
2.6.6 Isolation devices
2.7 Wiring systems
2.7.1 General
2.7.2 Cable selection
2.7.3 Connection of cables
2.7.4 Underground wiring
2.7.5 Aerial wiring system
2.7.6 Electrical connections
Section 3 Event wiring
3.1 General
3.2 Electrical supply
3.2.1 Supply from electrical installation
3.2.2 Supply by generating system
3.3 Maximum demand
3.4 Event switchboards
3.4.1 Enclosure
3.4.2 Accessibility
3.4.3 Mounting height
3.4.4 Socket-outlets
3.5 Event wiring systems
3.5.1 Cable selection
3.5.2 Connection of cables
3.5.3 Cables installed on ground, floor or platform
3.5.4 Underground wiring
3.5.5 Aerial Wiring
3.5.6 Cables supported by a catenary
3.6 Flexible cords and cord extension sets
3.6.1 General
3.6.2 Event wiring - detachable connections
3.7 Electrical accessories for events
3.7.1 General
3.7.2 ACS for event sites
3.7.3 Auxiliary socket-outlet panels
3.7.4 Outlet boxes
3.7.5 Electrical portable outlet devices
3.8 Electrical equipment for events
3.8.1 General
3.8.2 Electrical accessories
3.8.3 Event lighting
3.8.4 Prohibited zones around gas cylinders
3.9 Riding devices
Section 4 Verification
4.1 General
4.2 In Australia
4.2.1 Initial verification of installation wiring
4.2.2 Initial verification of event wiring
4.2.3 Periodic verification
4.3 In New Zealand
4.3.1 Initial verification
4.3.2 Verification following repairs
4.3.3 Periodic assessment
Appendix A (informative) Electrical installation and event wiring guide
Appendix B (informative) Low voltage event wiring arrangements
Appendix C (normative) Periodic assessment of permanent installation at event venues New Zealand only
Appendix D (normative) Periodic assessment of event wiring New Zealand only
Appendix E (informative) Degrees of protection of enclosed equipment
Appendix F (informative) WS classification of wiring systems
Appendix G (normative) Marking of event switchboards to indicate the presence of live parts
Appendix H (informative) Recommended colours for tags on tested equipment
Bibliography
Previous versions
AS/NZS 3002:2021
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.