AS/NZS 3002:2008
Electrical installations - Shows and carnivals
Sets out requirements for the supply of electricity at low-voltage by wiring systems to power consuming devices used for accommodation, entertainment or display purposes within - (a) concessions; (b) tents; (c) living quarters; and (d) other structures associated with events with a maximum duration of four weeks. For the purposes of this Standard, events include exhibitions, shows, carnivals, scouting jamborees, army camps and the like.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$108.90 NZD
|
|
| HardCopy |
$121.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 3002:2008 ELECTRICAL INSTALLATIONS-SHOWS AND CARNIVALS
PREFACE
CONTENTS
FOREWORD
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 APPLICATION
1.3 REFERENCED DOCUMENTS
1.4 DEFINITIONS
1.4.1 Cascadable reticulation unit (CRU)
1.4.2 Competent person
1.4.3 Concession
1.4.4 Concession low-voltage electrical installation
1.4.5 Connection facility
1.4.6 Detachable connection
1.4.7 Direct connection
1.4.8 Electrical portable outlet device
1.4.9 Outlet box
1.4.10 Permanent site low-voltage electrical installation
1.4.11 Residual current device (RCD)
1.4.12 Site
SECTION 2 PERMANENT SITE LOW-VOLTAGE ELECTRICAL INSTALLATION
2.1 METHOD OF SUPPLY
2.1.1 General
2.1.2 Underground wiring
2.1.3 Overhead wiring
2.2 MAXIMUM DEMAND
2.3 CONNECTION FACILITIES
2.3.1 General
2.3.2 Enclosure
2.3.3 Socket-outlets
2.3.4 Other connection facilities
2.3.5 Overload protection
2.3.6 RCD Protection
2.3.7 Control and isolation
2.4 SWITCHBOARDS
2.4.1 General
2.4.2 Enclosure
2.5 LOCATION AND MOUNTING OF SWITCHBOARD ENCLOSURES
2.5.2 Socket-outlets
2.5.3 Identification
SECTION 3 SUPPLY BY GENERATING/INVERTER PLANT
3.1 GENERAL
3.2 GENERATING SETS
3.3 INVERTERS
3.4 RCD TYPE FOR GENERATOR SETS AND SWITCHBOARDS
3.4.1 In New Zealand
SECTION 4 TEMPORARY DISTRIBUTION SYSTEMS AND ELECTRICAL EQUIPMENT
4.1 GENERAL
4.2 CABLE
4.2.1 Cable selection
4.2.2 Installation of cables
4.2.3 Connection of cables
4.3 CASCADABLE RETICULATION UNITS
4.3.1 General
4.3.2 Enclosure
4.3.3 Location and mounting of cascadable reticulation units
4.4 OUTLET BOXES
4.4.1 General
4.4.2 Construction
4.4.3 Termination of supply lead
4.4.4 Socket-outlets
4.4.5 Earthing
4.4.6 Overcurrent protection
4.4.7 Protection against earth leakage current
4.4.8 Control switches
4.4.9 Marking
4.5 ELECTRICAL PORTABLE OUTLET DEVICES
4.5.1 General
4.5.2 Connection to low-voltage electrical power supply
4.5.3 Location
4.5.4 Protection against earth leakage current
4.6 FESTOON AND DECORATIVE LIGHTING
4.6.1 General
4.6.2 Clearances
4.6.3 Loading of final subcircuits
4.6.4 Decorative lighting outfits
4.6.5 Protection against earth leakage current
4.7 RIDING DEVICES
APPENDIX A - REQUIREMENTS FOR TESTING
A1 SCOPE
A2 PERSONNEL
A3 VERIFICATION
A4 TESTING OF RESIDUAL CURRENT DEVICES (RCDs)
A5 PERIODIC VERIFICATION (FIXED INSTALLATION)
A6 PERIODIC VERIFICATION (FITTINGS)
A7 PERIODIC VERIFICATION CERTIFICATION (NEW ZEALAND ONLY)
A8 CERTIFICATE OF VERIFICATION
APPENDIX B - EXAMPLE LOW-VOLTAGE ELECTRICAL INSTALLATION ARRANGEMENTS
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
References
Safety of portable inverters
Installation couplers - General requirements
Related Information
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 60(2)
Citation context:A person who installs any of the following must ensure that the installation complies with Part 2 of AS/NZS 3000 and also with the standard indicated:... ...(f) a site installation that is... ...(ii) in a show or carnival: AS/NZS 3002; or...
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 75(1)
Citation context:The owners and operators of the following installations must ensure that the installations are periodically assessed as set out below, to determine whether they are electrically safe and otherwise comply with these regulations:... ...(d) low voltage insta
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: Schedule 2
Citation context:AS/NZS 3002 (means) AS/NZS 3002:2008: Electrical installations—Shows and carnivals, subject to the variation that references to AS/NZS 3439.4 must be read as references to AS/NZS 3439.4.2009
Similar Standards
-
AS/NZS 3002:2021
AS/NZS 3002:2021 Electrical installations - Shows and carnival events
-
AS/NZS 3004.1:2014
Electrical installations - Marinas and boats - Part 1: Marinas -
AS/NZS 3004.2:2014
Electrical installations - Marinas and boats - Part 2: Boat installations
-
AS/NZS 3004.2:2014 A1
Electrical installations - Marinas and boats - Part 2: Boat installations: Amendment 1:2015
AS/NZS 3002:2008 ELECTRICAL INSTALLATIONS-SHOWS AND CARNIVALS
PREFACE
CONTENTS
FOREWORD
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 APPLICATION
1.3 REFERENCED DOCUMENTS
1.4 DEFINITIONS
1.4.1 Cascadable reticulation unit (CRU)
1.4.2 Competent person
1.4.3 Concession
1.4.4 Concession low-voltage electrical installation
1.4.5 Connection facility
1.4.6 Detachable connection
1.4.7 Direct connection
1.4.8 Electrical portable outlet device
1.4.9 Outlet box
1.4.10 Permanent site low-voltage electrical installation
1.4.11 Residual current device (RCD)
1.4.12 Site
SECTION 2 PERMANENT SITE LOW-VOLTAGE ELECTRICAL INSTALLATION
2.1 METHOD OF SUPPLY
2.1.1 General
2.1.2 Underground wiring
2.1.3 Overhead wiring
2.2 MAXIMUM DEMAND
2.3 CONNECTION FACILITIES
2.3.1 General
2.3.2 Enclosure
2.3.3 Socket-outlets
2.3.4 Other connection facilities
2.3.5 Overload protection
2.3.6 RCD Protection
2.3.7 Control and isolation
2.4 SWITCHBOARDS
2.4.1 General
2.4.2 Enclosure
2.5 LOCATION AND MOUNTING OF SWITCHBOARD ENCLOSURES
2.5.2 Socket-outlets
2.5.3 Identification
SECTION 3 SUPPLY BY GENERATING/INVERTER PLANT
3.1 GENERAL
3.2 GENERATING SETS
3.3 INVERTERS
3.4 RCD TYPE FOR GENERATOR SETS AND SWITCHBOARDS
3.4.1 In New Zealand
SECTION 4 TEMPORARY DISTRIBUTION SYSTEMS AND ELECTRICAL EQUIPMENT
4.1 GENERAL
4.2 CABLE
4.2.1 Cable selection
4.2.2 Installation of cables
4.2.3 Connection of cables
4.3 CASCADABLE RETICULATION UNITS
4.3.1 General
4.3.2 Enclosure
4.3.3 Location and mounting of cascadable reticulation units
4.4 OUTLET BOXES
4.4.1 General
4.4.2 Construction
4.4.3 Termination of supply lead
4.4.4 Socket-outlets
4.4.5 Earthing
4.4.6 Overcurrent protection
4.4.7 Protection against earth leakage current
4.4.8 Control switches
4.4.9 Marking
4.5 ELECTRICAL PORTABLE OUTLET DEVICES
4.5.1 General
4.5.2 Connection to low-voltage electrical power supply
4.5.3 Location
4.5.4 Protection against earth leakage current
4.6 FESTOON AND DECORATIVE LIGHTING
4.6.1 General
4.6.2 Clearances
4.6.3 Loading of final subcircuits
4.6.4 Decorative lighting outfits
4.6.5 Protection against earth leakage current
4.7 RIDING DEVICES
APPENDIX A - REQUIREMENTS FOR TESTING
A1 SCOPE
A2 PERSONNEL
A3 VERIFICATION
A4 TESTING OF RESIDUAL CURRENT DEVICES (RCDs)
A5 PERIODIC VERIFICATION (FIXED INSTALLATION)
A6 PERIODIC VERIFICATION (FITTINGS)
A7 PERIODIC VERIFICATION CERTIFICATION (NEW ZEALAND ONLY)
A8 CERTIFICATE OF VERIFICATION
APPENDIX B - EXAMPLE LOW-VOLTAGE ELECTRICAL INSTALLATION ARRANGEMENTS
Previous versions
AS/NZS 3002:2008
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.