NZS 3114:1987
Specification for concrete surface finishes
Categorizes by means of description and illustration various classes of surface finish of concrete obtained off-the-form, by exposed aggregate and on floors, exterior pavements and inverts.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
|
Download |
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
Committee representation
Amendments
Contents
Table listing
Figure listing
Classes of pavement and floor finishes listing
Related documents
Foreword
Part 1 Overview
1 Scope
2 Interpretation
3 References
4 Definitions
Part 1 - Off-the-form surface finishes
101 Scope
102 Selection of surface finish
103 Blemishes
104 Surface tolerances
105 Specification of finishes
106 Materials and workmanship
Part 2 - Exposed aggregate surfaces
201 Scope
202 Selection of surface finish
203 Blemishes
204 Surface tolerances
205 Specification of finishes
206 Materials and workmanship
Part 3 - Floors, exterior pavements, and inverts
301 Scope
302 Selection of surface finishes
303 Blemishes
304 Surface tolerances
305 Specification of finishes
Appendix
A - Blemishes in concrete
B - Other sources of information
Table
1 - Classes of surface finish
2 - Classes of floor, exterior pavement, and invert finishes
3 - Tolerances for abrupt deviations or offsets and gradual deviations
4 - Colour variations
5 - Colour variations (later ages of concrete)
6 - Physical irregularities
7 - Physical irregularities (later ages of concrete)
Figure
1 - Abrupt variations or offsets
2 - Gradual variations
3 - Abrupt variations or offsets
4 - Gradual variations
5 - Photograph of typical surface illustrating class F1 off-the-form finish
6 - Photograph of typical surface illustrating class F2 off-the-form finish
7 - Photograph of typical surface illustrating class F3 off-the-form finish
8 - Photograph of typical surface illustrating class F4 and F5 off-the-form finish
9 - Photograph of typical surface illustrating class F6 off-the-form finish
10 - Class U1, screeded
11 - Class U2, floated (manual)
12 - Class U2 floated (power)
13 - Class U3, trowelled (floor)
14 - Class U4, machined (spillway)
15 - Class U5, shallow textured by bass broom
16 - Class U6, deep textured by wire broom
17 - Class U6, deep textured by rubber tyned rake
18 - Class U7, grooved by flailing hardened concrete
19 - Class U7, grooved by sawing
20 - Class U8, grooved fresh concrete
21 - Class U9, scabbled
22 - Class U10, special textures
23 - Class U11, ground
24 - Grey scale
25 - Blowholes
- D1
- G15
Amendments
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Copyright in the standards listed on this page is either Crown copyright, or is owned by the Crown in right of New Zealand, administered by the New Zealand Standards Executive.
Access to this standard has been sponsored by the Ministry of Business, Innovation and Employment under copyright licence LN001319.
You are permitted to view and print one single copy of the PDF version of this standard free of charge (subject to printing costs) for your own personal use. You are not permitted to reproduce or distribute any part of this standard without prior written permission from Standards New Zealand, on behalf of the New Zealand Standards Executive, unless your actions are covered by Part 3 of the Copyright Act 1994.
For queries about copyright, please contact Standards New Zealand at copyright@standards.govt.nz.
Related Information
Building Code Compliance Document D1
Ministry: Ministry of Business, Innovation, and Employment - Building Systems Performance (BSP)
Section: AS1
Citation context:Refers to 3114:1987(NZS)A1.
Building Code Compliance Document D1
Ministry: Ministry of Business, Innovation, and Employment - Building Systems Performance (BSP)
Section: AS1
Citation context:Building Code Compliance Document G15
Ministry: Ministry of Business, Innovation, and Employment - Building Systems Performance (BSP)
Section: AS1
Citation context:Refers to 3114:1987(NZS)A1.
Building Code Compliance Document G15
Ministry: Ministry of Business, Innovation, and Employment - Building Systems Performance (BSP)
Section: AS1
Citation context:Guide to tolerances, materials and workmanship in new residential construction 2015
Ministry: Ministry of Business, Innovation, and Employment - Building Systems Performance (BSP)
Section: 1. Landscaping and grounds
Citation context:Abrupt changes and gradual variations on concrete surfaces exceed specifications for the relevant surface type as per NZS 3114:1987
Guide to tolerances, materials and workmanship in new residential construction 2015
Ministry: Ministry of Business, Innovation, and Employment - Building Systems Performance (BSP)
Section: 2. Flooring
Citation context:Concrete floor has hollows or mounds exceeding those allowed for in NZS 3114:1987 (Part 3)... ...Cracks which rupture or significantly impair the appearance or performance of the finishing floor materials – see NZS 3114:1987 (Part 3)... ...Where the acceptable colour range is not specified, refer to the colour variation tolerances within NZS 3114:1987 (Part 3).
Guide to tolerances, materials and workmanship in new residential construction 2015
Ministry: Ministry of Business, Innovation, and Employment - Building Systems Performance (BSP)
Section: How to use this guide: Measurements
Citation context:Referenced standard
Similar Standards
-
AS/NZS 3725 Supplement 1:2007
Design for installation of buried concrete pipes – Commentary -
AS/NZS 3725:2007
Design for installation of buried concrete pipes
-
AS/NZS 4065:2010
Concrete utility services poles
-
AS/NZS 4456:2003 (Set)
Masonry units, segmental pavers and flags - Methods of test
Committee representation
Amendments
Contents
Table listing
Figure listing
Classes of pavement and floor finishes listing
Related documents
Foreword
Part 1 Overview
1 Scope
2 Interpretation
3 References
4 Definitions
Part 1 - Off-the-form surface finishes
101 Scope
102 Selection of surface finish
103 Blemishes
104 Surface tolerances
105 Specification of finishes
106 Materials and workmanship
Part 2 - Exposed aggregate surfaces
201 Scope
202 Selection of surface finish
203 Blemishes
204 Surface tolerances
205 Specification of finishes
206 Materials and workmanship
Part 3 - Floors, exterior pavements, and inverts
301 Scope
302 Selection of surface finishes
303 Blemishes
304 Surface tolerances
305 Specification of finishes
Appendix
A - Blemishes in concrete
B - Other sources of information
Table
1 - Classes of surface finish
2 - Classes of floor, exterior pavement, and invert finishes
3 - Tolerances for abrupt deviations or offsets and gradual deviations
4 - Colour variations
5 - Colour variations (later ages of concrete)
6 - Physical irregularities
7 - Physical irregularities (later ages of concrete)
Figure
1 - Abrupt variations or offsets
2 - Gradual variations
3 - Abrupt variations or offsets
4 - Gradual variations
5 - Photograph of typical surface illustrating class F1 off-the-form finish
6 - Photograph of typical surface illustrating class F2 off-the-form finish
7 - Photograph of typical surface illustrating class F3 off-the-form finish
8 - Photograph of typical surface illustrating class F4 and F5 off-the-form finish
9 - Photograph of typical surface illustrating class F6 off-the-form finish
10 - Class U1, screeded
11 - Class U2, floated (manual)
12 - Class U2 floated (power)
13 - Class U3, trowelled (floor)
14 - Class U4, machined (spillway)
15 - Class U5, shallow textured by bass broom
16 - Class U6, deep textured by wire broom
17 - Class U6, deep textured by rubber tyned rake
18 - Class U7, grooved by flailing hardened concrete
19 - Class U7, grooved by sawing
20 - Class U8, grooved fresh concrete
21 - Class U9, scabbled
22 - Class U10, special textures
23 - Class U11, ground
24 - Grey scale
25 - Blowholes
- D1
- G15
Amendments
NZS 3114:1987
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.