ISO/IEC 80079-34:2011
Explosive atmospheres — Part 34: Application of quality systems for equipment manufacture
ISO/IEC 80079-34:2011 specifies particular requirements and information for establishing and maintaining a quality system to manufacture Ex equipment including protective systems in accordance with the Ex certificate. It does not preclude the use of other quality systems that are compatible with the objectives of ISO 9001:2008 and which provide equivalent results. This publication is published as a double logo standard. This standard should be read in conjunction with ISO 9001:2008.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$118.26 NZD
|
|
| HardCopy |
$152.17 NZD
|
|
| Networkable PDF |
Price varies
|
English
CONTENTS
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Quality management system
4.1 General requirements
4.2 Documentation requirements
5 Management responsibility
5.1 Management commitment
5.2 Customer focus
5.3 Quality policy
5.4 Planning
5.5 Responsibility, authority and communication
5.6 Management review
6 Resource management
6.1 Provision of resources
6.2 Human resources
6.3 Infrastructure
6.4 Work environment
7 Product realization
7.1 Planning of product realization
7.2 Customer-related processes
7.3 Design and development
7.4 Purchasing
7.5 Production and service provision
7.6 Control of monitoring and measuring equipment
8 Measurement, analysis and improvement
8.1 General
8.2 Monitoring and measurement
8.3 Control of nonconforming product
8.4 Analysis of data
8.5 Improvement
Annex A (informative) Information relevant to particular types of protection and specific products
Annex B (informative) Verification criteria for elements with non-measurable paths used as an integral part of a type of protection
Bibliography
Table A.1 – Component features requiring compatibility
Français
SOMMAIRE
AVANT-PROPOS
INTRODUCTION
1 Domaine d’application
2 Références normatives
3 Termes et définitions
4 Système de management de la qualité
4.1 Exigences générales
4.2 Exigences relatives à la documentation
5 Responsabilité de la direction
5.1 Engagement de la direction
5.2 Écoute client
5.3 Politique qualité
5.4 Planification
5.5 Responsabilité, autorité et communication
5.6 Revue de direction
6 Management des ressources
6.1 Mise à disposition des ressources
6.2 Ressources humaines
6.3 Infrastructures
6.4 Environnement de travail
7 Réalisation du produit
7.1 Planification de la réalisation du produit
7.2 Processus relatifs aux clients
7.3 Conception et développement
7.4 Achats
7.5 Production et préparation du service
7.6 Maîtrise des équipements de surveillance et de mesure
8 Mesure, analyse et amélioration
8.1 Généralités
8.2 Surveillance et mesurage
8.3 Maîtrise du produit non conforme
8.4 Analyse des données
8.5 Amélioration
Annexe A (informative) Informations concernant des modes de protection particuliers et produits spécifiques
Annexe B (informative) Critères de vérification relatifs aux éléments comportant des passages non mesurables utilisés comme partie intégrante d'un mode de protection
Bibliographie
Tableau A.1 – Exigence de compatibilité des caractéristiques des composants
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 1299:2009
Electrical equipment for mines and quarries - Explosion-protected three-phase restrained plugs and receptacles for working voltages up to and including 3.3 kV
-
AS/NZS 1299:2009 A1
Electrical equipment for mines and quarries - Explosion-protected three-phase restrained plugs and receptacles for working voltages up to and including 3.3 kV: Amendment 1:2012 -
AS/NZS 1300:2009
Electrical equipment for mines and quarries - Bolted explosion-protected three-phase cable coupling devices
-
AS/NZS 1300:2009 A1
Electrical equipment for mines and quarries - Bolted explosion-protected three-phase cable coupling devices: Amendment 1:2012
English
CONTENTS
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Quality management system
4.1 General requirements
4.2 Documentation requirements
5 Management responsibility
5.1 Management commitment
5.2 Customer focus
5.3 Quality policy
5.4 Planning
5.5 Responsibility, authority and communication
5.6 Management review
6 Resource management
6.1 Provision of resources
6.2 Human resources
6.3 Infrastructure
6.4 Work environment
7 Product realization
7.1 Planning of product realization
7.2 Customer-related processes
7.3 Design and development
7.4 Purchasing
7.5 Production and service provision
7.6 Control of monitoring and measuring equipment
8 Measurement, analysis and improvement
8.1 General
8.2 Monitoring and measurement
8.3 Control of nonconforming product
8.4 Analysis of data
8.5 Improvement
Annex A (informative) Information relevant to particular types of protection and specific products
Annex B (informative) Verification criteria for elements with non-measurable paths used as an integral part of a type of protection
Bibliography
Table A.1 – Component features requiring compatibility
Français
SOMMAIRE
AVANT-PROPOS
INTRODUCTION
1 Domaine d’application
2 Références normatives
3 Termes et définitions
4 Système de management de la qualité
4.1 Exigences générales
4.2 Exigences relatives à la documentation
5 Responsabilité de la direction
5.1 Engagement de la direction
5.2 Écoute client
5.3 Politique qualité
5.4 Planification
5.5 Responsabilité, autorité et communication
5.6 Revue de direction
6 Management des ressources
6.1 Mise à disposition des ressources
6.2 Ressources humaines
6.3 Infrastructures
6.4 Environnement de travail
7 Réalisation du produit
7.1 Planification de la réalisation du produit
7.2 Processus relatifs aux clients
7.3 Conception et développement
7.4 Achats
7.5 Production et préparation du service
7.6 Maîtrise des équipements de surveillance et de mesure
8 Mesure, analyse et amélioration
8.1 Généralités
8.2 Surveillance et mesurage
8.3 Maîtrise du produit non conforme
8.4 Analyse des données
8.5 Amélioration
Annexe A (informative) Informations concernant des modes de protection particuliers et produits spécifiques
Annexe B (informative) Critères de vérification relatifs aux éléments comportant des passages non mesurables utilisés comme partie intégrante d'un mode de protection
Bibliographie
Tableau A.1 – Exigence de compatibilité des caractéristiques des composants