ISO 8513:2000
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Determination of longitudinal tensile properties
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$118.26 NZD
|
|
| Networkable PDF |
Price varies
|
Plastics piping systems— Glass-reinforced thermosetting plastics (GRP) pipes— Determination of ...
Contents Page
Foreword
Plastics piping systems— Glass-reinforced thermosetting plastics (GRP) pipes— Determination of ...
1 Scope
2 Terms and definitions
3 Principle
4 Apparatus
4.1 Tensile-testing machine
4.2 Grips
4.3 Dimension measurement devices
4.4 Extension indicator
5 Test pieces
5.1 General
5.2 Strip test piece (method A)
5.2.1 Shape
5.2.2 Dimensions
5.2.2.1 Length
5.2.2.2 Shaped strip
5.2.2.3 Parallel-sided strip
5.2.3 Use of built-up ends
5.3 Pipe section test pieces (method B)
5.4 Plate test pieces (method C)
5.5 Number
6 Conditioning
7 Test temperature
8 Procedure (methods A, B and C)
8.1 For a strip test piece (methodA), measure and record to the nearest
8.2 Place the test piece in the tensile-testing machine (
8.3 Except for method C, if determination of the elongation and/or modulus is required, attach...
8.4 Load the test piece by separating the grips at a constant speed, in accordance with
8.5 Discard any test pieces which have slipped in the grips and those for which rupture has oc...
9 Calculation
9.1 For strip test pieces (method A)
9.1.1 For each test piece, calculate the initial longitudinal tensile strength,
9.1.2 For each test piece, calculate the percentage ultimate elongation. For all the test piec...
9.1.3 If required, calculate the longitudinal modulus of elasticity,
9.2 For pipe test pieces (method B)
9.2.1 For each test piece, calculate the initial longitudinal tensile strength,
9.2.2 For each test piece, calculate the percentage ultimate elongation,
9.2.3 If required, calculate the longitudinal modulus of elasticity,
9.3 For plate test pieces (method C)
10 Test report
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 1254:2010
PVC-U pipes and fittings for stormwater and surface water applications
-
AS/NZS 1254:2010 A1
PVC-U pipes and fittings for stormwater and surface water applications: Amendment 1 -
AS/NZS 1254:2010 A2
PVC-U pipes and fittings for stormwater and surface water applications: Amendment 2 -
AS/NZS 1254:2010 A3
PVC-U pipes and fittings for stormwater and surface water applications: Amendment 3
Plastics piping systems— Glass-reinforced thermosetting plastics (GRP) pipes— Determination of ...
Contents Page
Foreword
Plastics piping systems— Glass-reinforced thermosetting plastics (GRP) pipes— Determination of ...
1 Scope
2 Terms and definitions
3 Principle
4 Apparatus
4.1 Tensile-testing machine
4.2 Grips
4.3 Dimension measurement devices
4.4 Extension indicator
5 Test pieces
5.1 General
5.2 Strip test piece (method A)
5.2.1 Shape
5.2.2 Dimensions
5.2.2.1 Length
5.2.2.2 Shaped strip
5.2.2.3 Parallel-sided strip
5.2.3 Use of built-up ends
5.3 Pipe section test pieces (method B)
5.4 Plate test pieces (method C)
5.5 Number
6 Conditioning
7 Test temperature
8 Procedure (methods A, B and C)
8.1 For a strip test piece (methodA), measure and record to the nearest
8.2 Place the test piece in the tensile-testing machine (
8.3 Except for method C, if determination of the elongation and/or modulus is required, attach...
8.4 Load the test piece by separating the grips at a constant speed, in accordance with
8.5 Discard any test pieces which have slipped in the grips and those for which rupture has oc...
9 Calculation
9.1 For strip test pieces (method A)
9.1.1 For each test piece, calculate the initial longitudinal tensile strength,
9.1.2 For each test piece, calculate the percentage ultimate elongation. For all the test piec...
9.1.3 If required, calculate the longitudinal modulus of elasticity,
9.2 For pipe test pieces (method B)
9.2.1 For each test piece, calculate the initial longitudinal tensile strength,
9.2.2 For each test piece, calculate the percentage ultimate elongation,
9.2.3 If required, calculate the longitudinal modulus of elasticity,
9.3 For plate test pieces (method C)
10 Test report