ISO 21809-2:2014
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 2: Single layer fusion-bonded epoxy coatings
ISO 21809-2:2014 specifies the requirements for qualification, application, testing and handling of materials for plant application of single layer fusion-bonded epoxy (FBE) coatings applied externally for the corrosion protection of bare steel pipe for use in pipeline transportation systems for the petroleum and natural gas industries as defined in ISO 13623.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$322.61 NZD
|
|
| HardCopy |
$362.61 NZD
|
|
| Networkable PDF |
Price varies
|
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
4.1 Symbols
4.2 Abbreviated terms
5 General requirements
5.1 Rounding
5.2 Compliance to standard
6 Information supplied by the purchaser
6.1 General information
6.2 Additional information
7 Coating materials
7.1 Epoxy powder
7.2 Repair materials
8 Coating qualification
8.1 Qualification by manufacturer
8.2 Qualification by applicator
9 Application of coating
9.1 General
9.2 Surface preparation
9.3 Coating application and curing temperature
9.4 Coating thickness
9.5 Cutback
10 Inspection and testing
10.1 General
10.2 Testing of incoming epoxy powder
10.3 In-process and finished product testing requirements
10.4 Test results
11 Repair of coated pipe
11.1 General
11.2 Repair of holidays
11.3 Stripping and recoating
12 Markings
12.1 General
12.2 Required markings
13 Handling and storage in the coating area
13.1 Handling
13.2 Storage
14 Test reports and inspection documents
Annex A (normative) Test methods
Annex B (normative) Procedure qualification trial (PQT), inspection and testing plan (ITP) and daily log
Bibliography
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 1596:2014
The storage and handling of LP Gas -
AS/NZS 1596:2014 A1
The storage and handling of LP Gas - Amendment 1:2018 -
AS/NZS 1596:2014 A2
The storage and handling of LP Gas -
AS/NZS 2537.5:2011
Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications - Part 5: Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series - Specifications
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
4.1 Symbols
4.2 Abbreviated terms
5 General requirements
5.1 Rounding
5.2 Compliance to standard
6 Information supplied by the purchaser
6.1 General information
6.2 Additional information
7 Coating materials
7.1 Epoxy powder
7.2 Repair materials
8 Coating qualification
8.1 Qualification by manufacturer
8.2 Qualification by applicator
9 Application of coating
9.1 General
9.2 Surface preparation
9.3 Coating application and curing temperature
9.4 Coating thickness
9.5 Cutback
10 Inspection and testing
10.1 General
10.2 Testing of incoming epoxy powder
10.3 In-process and finished product testing requirements
10.4 Test results
11 Repair of coated pipe
11.1 General
11.2 Repair of holidays
11.3 Stripping and recoating
12 Markings
12.1 General
12.2 Required markings
13 Handling and storage in the coating area
13.1 Handling
13.2 Storage
14 Test reports and inspection documents
Annex A (normative) Test methods
Annex B (normative) Procedure qualification trial (PQT), inspection and testing plan (ITP) and daily log
Bibliography