ISO 13856-3:2013
Safety of machinery — Pressure-sensitive protective devices — Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices
ISO 13856-3:2013 establishes general principles and specifies requirements for the design and testing of those pressure-sensitive protective devices, with or without an external reset facility, that are not specified in either ISO 13856‑1 or ISO 13856‑2, and the majority of which are produced for specific applications and are not available as "off-the-shelf" items.
ISO 13856-3:2013 also gives specific requirements for the following pressure-sensitive protective devices: pressure-sensitive bumpers; pressure-sensitive plates; pressure-sensitive wires (trip wires).
It deals with the design of a pressure-sensitive device with regard to safety and reliability rather than its suitability for particular applications.
It is not applicable to specifying the dimensions of pressure-sensitive protective devices in relation to any particular application, or stopping devices according to IEC 60204‑1 used for the normal operation, including emergency stopping of machinery.
While requirements are given for the immunity of the device to electromagnetic disturbances, these are not intended to cover all aspects of electromagnetic compatibility (EMC).
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$386.00 NZD
|
|
| HardCopy |
$430.00 NZD
|
|
| Networkable PDF |
Price varies
|
Section sec_1
Section sec_2
Section sec_3
Section sec_3.1
Section sec_3.1.1
Section sec_3.1.2
Section sec_3.1.3
Section sec_3.2
Section sec_3.3
Section sec_3.4
Section sec_3.5
Section sec_3.6
Section sec_3.7
Section sec_3.8
Section sec_3.9
Section sec_3.10
Section sec_3.11
Section sec_3.12
Section sec_3.13
Section sec_3.14
Section sec_3.15
Section sec_3.16
Section sec_3.17
Section sec_3.18
Section sec_3.19
Table tab_a
Figure fig_1
Table tab_b
Figure fig_2
Section sec_4
Section sec_4.1
Section sec_4.2
Section sec_4.2.1
Section sec_4.2.2
Section sec_4.2.3
Section sec_4.2.4
Section sec_4.2.5
Section sec_4.2.6
Section sec_4.2.6.1
Section sec_4.2.6.2
Section sec_4.2.6.3
Section sec_4.2.7
Section sec_4.2.7.1
Section sec_4.2.7.2
Section sec_4.2.7.3
Section sec_4.2.7.4
Section sec_4.2.7.5
Section sec_4.2.8
Section sec_4.2.8.1
Section sec_4.2.8.2
Section sec_4.2.8.3
Section sec_4.2.9
Section sec_4.2.9.1
Section sec_4.2.9.2
Section sec_4.2.9.3
Section sec_4.2.9.4
Section sec_4.2.9.5
Section sec_4.2.9.6
Section sec_4.2.9.7
Section sec_4.2.10
Section sec_4.2.11
Section sec_4.2.12
Section sec_4.2.13
Section sec_4.2.13.1
Section sec_4.2.13.2
Section sec_4.2.14
Section sec_4.2.15
Section sec_4.2.15.1
Section sec_4.2.15.2
Section sec_4.2.15.3
Section sec_4.2.15.4
Section sec_4.2.16
Section sec_4.2.17
Section sec_4.2.18
Section sec_4.2.19
Section sec_4.2.20
Section sec_4.2.21
Section sec_4.3
Section sec_4.3.1
Section sec_4.3.2
Section sec_4.3.3
Table tab_1
Section sec_4.3.4
Section sec_4.4
Section sec_4.4.1
Section sec_4.4.2
Section sec_4.5
Section sec_4.5.1
Section sec_4.5.2
Section sec_4.5.3
Section sec_4.5.4
Section sec_4.5.5
Section sec_5
Section sec_5.1
Section sec_5.2
Section sec_5.3
Section sec_5.4
Section sec_6
Section sec_6.1
Section sec_6.2
Section sec_6.3
Section sec_6.3.1
Section sec_6.3.2
Section sec_7
Section sec_7.1
Section sec_7.1.1
Section sec_7.1.2
Section sec_7.1.3
Section sec_7.1.3.1
Section sec_7.1.3.2
Section sec_7.1.4
Section sec_7.1.5
Section sec_7.1.5.1
Table tab_2
Section sec_7.1.5.2
Section sec_7.1.5.3
Section sec_7.1.5.4
Section sec_7.1.6
Section sec_7.1.7
Section sec_7.1.8
Figure fig_3
Figure fig_4
Section sec_7.1.9
Section sec_7.1.10
Section sec_7.1.11
Section sec_7.1.11.1
Section sec_7.1.11.2
Section sec_7.1.11.3
Table tab_3
Section sec_7.1.11.4
Table tab_4
Section sec_7.1.11.5
Table tab_5
Section sec_7.1.11.6
Table tab_6
Section sec_7.1.12
Section sec_7.1.12.1
Section sec_7.1.12.2
Section sec_7.1.12.3
Section sec_7.1.13
Section sec_7.1.13.1
Section sec_7.1.13.2
Section sec_7.1.13.3
Section sec_7.1.13.4
Section sec_7.1.14
Section sec_7.1.15
Section sec_7.1.16
Section sec_7.1.16.1
Section sec_7.1.16.2
Section sec_7.1.17
Section sec_7.1.18
Section sec_7.1.19
Section sec_7.1.20
Section sec_7.1.21
Section sec_7.1.22
Section sec_7.2
Section sec_7.2.1
Section sec_7.2.2
Section sec_7.2.3
Section sec_7.2.4
Table tab_c
Figure fig_5
Section sec_7.3
Section sec_7.3.1
Table tab_7
Section sec_7.3.2
Section sec_7.4
Section sec_7.4.1
Section sec_7.4.2
Section sec_7.4.3
Section sec_7.4.4
Section sec_7.5
Section sec_7.5.1
Section sec_7.5.2
Annex sec_A
Table tab_d
Figure fig_A.1
Table tab_e
Figure fig_A.2
Table tab_f
Figure fig_A.3
Table tab_g
Figure fig_A.4
Annex sec_B
Table tab_h
Figure fig_B.1
Table tab_i
Figure fig_B.2
Annex sec_C
Annex sec_C.1
Annex sec_C.2
Annex sec_C.2.1
Annex sec_C.2.2
Annex sec_C.2.3
Annex sec_C.2.4
Annex sec_C.2.5
Annex sec_C.2.6
Annex sec_C.2.7
Annex sec_C.2.8
Annex sec_C.2.9
Annex sec_C.3
Annex sec_C.3.1
Table tab_j
Figure fig_C.1
Table tab_k
Figure fig_C.2
Annex sec_C.3.2
Annex sec_C.3.3
Annex sec_C.3.4
Annex sec_C.3.5
Annex sec_C.3.6
Annex sec_C.3.7
Annex sec_C.3.8
Annex sec_C.3.9
Annex sec_C.3.10
Annex sec_C.3.10.1
Figure fig_C.3
Annex sec_C.3.10.2
Annex sec_C.3.11
Table tab_l
Figure fig_C.4
Annex sec_C.4
Annex sec_C.4.1
Annex sec_C.4.2
Table tab_m
Figure fig_C.5
Annex sec_C.5
Table tab_o
Figure fig_C.6
Annex sec_D
Annex sec_D.1
Annex sec_D.2
Annex sec_D.3
Annex sec_D.3.1
Annex sec_D.3.2
Annex sec_D.3.3
Annex sec_D.4
Annex sec_D.5
Annex sec_D.6
Annex sec_E
Annex sec_E.1
Annex sec_E.2
Annex sec_E.3
Annex sec_E.4
Annex sec_E.5
Reference ref_1
Reference ref_2
Reference ref_3
Reference ref_4
Reference ref_5
Reference ref_6
Reference ref_7
Reference ref_8
Reference ref_9
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements for design and testing
4.1 General
4.2 Basic requirements
4.3 Specific requirements for pressure-sensitive bumpers
4.4 Specific requirements for pressure-sensitive plates
4.5 Specific requirements for pressure-sensitive wires (trip wires)
5 Marking
5.1 General
5.2 Labels
5.3 Marking of the control unit
5.4 Marking of the sensor
6 Information for selection and use
6.1 General
6.2 Essential data for selection of suitable pressure-sensitive protective device
6.3 Information for use
7 Verification of requirements
7.1 Verification of requirements applicable to all pressure-sensitive protective devices covered by this part of ISO 13856
7.2 Verification of requirements for pressure-sensitive bumpers only
7.3 Verification of requirements for pressure-sensitive plates only
7.4 Verification of requirements for pressure-sensitive wires only
7.5 Other tests
Annex A (normative) Timing diagrams for pressure-sensitive bumpers, plates, wires and similar devices with/without reset
Annex B (informative) Device characteristics — Explanatory remarks and recommendations
Annex C (informative) Design guidance
Annex D (informative) Application guidance
Annex E (informative) Commissioning and inspection
Bibliography
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 3000:2018
Electrical installations - Known as the Australian/New Zealand Wiring Rules -
AS/NZS 3000:2018 A1
Electrical installations (known as the Australian/New Zealand Wiring Rules): Amendment 1 -
AS/NZS 3000:2018 A2
Electrical Installations (known as the Australian/New Zealand Wiring Rules)
-
AS/NZS 3000:2018 A3
Electrical installations (known as the Australian/New Zealand Wiring Rules)
Section sec_1
Section sec_2
Section sec_3
Section sec_3.1
Section sec_3.1.1
Section sec_3.1.2
Section sec_3.1.3
Section sec_3.2
Section sec_3.3
Section sec_3.4
Section sec_3.5
Section sec_3.6
Section sec_3.7
Section sec_3.8
Section sec_3.9
Section sec_3.10
Section sec_3.11
Section sec_3.12
Section sec_3.13
Section sec_3.14
Section sec_3.15
Section sec_3.16
Section sec_3.17
Section sec_3.18
Section sec_3.19
Table tab_a
Figure fig_1
Table tab_b
Figure fig_2
Section sec_4
Section sec_4.1
Section sec_4.2
Section sec_4.2.1
Section sec_4.2.2
Section sec_4.2.3
Section sec_4.2.4
Section sec_4.2.5
Section sec_4.2.6
Section sec_4.2.6.1
Section sec_4.2.6.2
Section sec_4.2.6.3
Section sec_4.2.7
Section sec_4.2.7.1
Section sec_4.2.7.2
Section sec_4.2.7.3
Section sec_4.2.7.4
Section sec_4.2.7.5
Section sec_4.2.8
Section sec_4.2.8.1
Section sec_4.2.8.2
Section sec_4.2.8.3
Section sec_4.2.9
Section sec_4.2.9.1
Section sec_4.2.9.2
Section sec_4.2.9.3
Section sec_4.2.9.4
Section sec_4.2.9.5
Section sec_4.2.9.6
Section sec_4.2.9.7
Section sec_4.2.10
Section sec_4.2.11
Section sec_4.2.12
Section sec_4.2.13
Section sec_4.2.13.1
Section sec_4.2.13.2
Section sec_4.2.14
Section sec_4.2.15
Section sec_4.2.15.1
Section sec_4.2.15.2
Section sec_4.2.15.3
Section sec_4.2.15.4
Section sec_4.2.16
Section sec_4.2.17
Section sec_4.2.18
Section sec_4.2.19
Section sec_4.2.20
Section sec_4.2.21
Section sec_4.3
Section sec_4.3.1
Section sec_4.3.2
Section sec_4.3.3
Table tab_1
Section sec_4.3.4
Section sec_4.4
Section sec_4.4.1
Section sec_4.4.2
Section sec_4.5
Section sec_4.5.1
Section sec_4.5.2
Section sec_4.5.3
Section sec_4.5.4
Section sec_4.5.5
Section sec_5
Section sec_5.1
Section sec_5.2
Section sec_5.3
Section sec_5.4
Section sec_6
Section sec_6.1
Section sec_6.2
Section sec_6.3
Section sec_6.3.1
Section sec_6.3.2
Section sec_7
Section sec_7.1
Section sec_7.1.1
Section sec_7.1.2
Section sec_7.1.3
Section sec_7.1.3.1
Section sec_7.1.3.2
Section sec_7.1.4
Section sec_7.1.5
Section sec_7.1.5.1
Table tab_2
Section sec_7.1.5.2
Section sec_7.1.5.3
Section sec_7.1.5.4
Section sec_7.1.6
Section sec_7.1.7
Section sec_7.1.8
Figure fig_3
Figure fig_4
Section sec_7.1.9
Section sec_7.1.10
Section sec_7.1.11
Section sec_7.1.11.1
Section sec_7.1.11.2
Section sec_7.1.11.3
Table tab_3
Section sec_7.1.11.4
Table tab_4
Section sec_7.1.11.5
Table tab_5
Section sec_7.1.11.6
Table tab_6
Section sec_7.1.12
Section sec_7.1.12.1
Section sec_7.1.12.2
Section sec_7.1.12.3
Section sec_7.1.13
Section sec_7.1.13.1
Section sec_7.1.13.2
Section sec_7.1.13.3
Section sec_7.1.13.4
Section sec_7.1.14
Section sec_7.1.15
Section sec_7.1.16
Section sec_7.1.16.1
Section sec_7.1.16.2
Section sec_7.1.17
Section sec_7.1.18
Section sec_7.1.19
Section sec_7.1.20
Section sec_7.1.21
Section sec_7.1.22
Section sec_7.2
Section sec_7.2.1
Section sec_7.2.2
Section sec_7.2.3
Section sec_7.2.4
Table tab_c
Figure fig_5
Section sec_7.3
Section sec_7.3.1
Table tab_7
Section sec_7.3.2
Section sec_7.4
Section sec_7.4.1
Section sec_7.4.2
Section sec_7.4.3
Section sec_7.4.4
Section sec_7.5
Section sec_7.5.1
Section sec_7.5.2
Annex sec_A
Table tab_d
Figure fig_A.1
Table tab_e
Figure fig_A.2
Table tab_f
Figure fig_A.3
Table tab_g
Figure fig_A.4
Annex sec_B
Table tab_h
Figure fig_B.1
Table tab_i
Figure fig_B.2
Annex sec_C
Annex sec_C.1
Annex sec_C.2
Annex sec_C.2.1
Annex sec_C.2.2
Annex sec_C.2.3
Annex sec_C.2.4
Annex sec_C.2.5
Annex sec_C.2.6
Annex sec_C.2.7
Annex sec_C.2.8
Annex sec_C.2.9
Annex sec_C.3
Annex sec_C.3.1
Table tab_j
Figure fig_C.1
Table tab_k
Figure fig_C.2
Annex sec_C.3.2
Annex sec_C.3.3
Annex sec_C.3.4
Annex sec_C.3.5
Annex sec_C.3.6
Annex sec_C.3.7
Annex sec_C.3.8
Annex sec_C.3.9
Annex sec_C.3.10
Annex sec_C.3.10.1
Figure fig_C.3
Annex sec_C.3.10.2
Annex sec_C.3.11
Table tab_l
Figure fig_C.4
Annex sec_C.4
Annex sec_C.4.1
Annex sec_C.4.2
Table tab_m
Figure fig_C.5
Annex sec_C.5
Table tab_o
Figure fig_C.6
Annex sec_D
Annex sec_D.1
Annex sec_D.2
Annex sec_D.3
Annex sec_D.3.1
Annex sec_D.3.2
Annex sec_D.3.3
Annex sec_D.4
Annex sec_D.5
Annex sec_D.6
Annex sec_E
Annex sec_E.1
Annex sec_E.2
Annex sec_E.3
Annex sec_E.4
Annex sec_E.5
Reference ref_1
Reference ref_2
Reference ref_3
Reference ref_4
Reference ref_5
Reference ref_6
Reference ref_7
Reference ref_8
Reference ref_9
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements for design and testing
4.1 General
4.2 Basic requirements
4.3 Specific requirements for pressure-sensitive bumpers
4.4 Specific requirements for pressure-sensitive plates
4.5 Specific requirements for pressure-sensitive wires (trip wires)
5 Marking
5.1 General
5.2 Labels
5.3 Marking of the control unit
5.4 Marking of the sensor
6 Information for selection and use
6.1 General
6.2 Essential data for selection of suitable pressure-sensitive protective device
6.3 Information for use
7 Verification of requirements
7.1 Verification of requirements applicable to all pressure-sensitive protective devices covered by this part of ISO 13856
7.2 Verification of requirements for pressure-sensitive bumpers only
7.3 Verification of requirements for pressure-sensitive plates only
7.4 Verification of requirements for pressure-sensitive wires only
7.5 Other tests
Annex A (normative) Timing diagrams for pressure-sensitive bumpers, plates, wires and similar devices with/without reset
Annex B (informative) Device characteristics — Explanatory remarks and recommendations
Annex C (informative) Design guidance
Annex D (informative) Application guidance
Annex E (informative) Commissioning and inspection
Bibliography