ISO 13766-1:2018
Earth-moving and building construction machinery — Electromagnetic compatibility (EMC) of machines with internal electrical power supply — Part 1: General EMC requirements under typical electromagnetic environmental conditions
ISO 13766-1:2018 provides test methods and acceptance criteria for the evaluation of the electromagnetic compatibility (EMC) of earth-moving machinery, as defined in ISO 6165:2012, and of the following building construction machinery as defined in ISO/TR 12603:2010:
- drilling and foundation equipment;
- equipment used for the preparation, conveyance and compaction of concrete, mortar and processing reinforcement;
- road construction and maintenance machinery and equipment.
ISO 13766-1:2018 deals with general EMC requirements under typical electromagnetic environmental conditions. (ISO 13766‑2:2018 deals with EMC requirements specifically related to functional safety).
Electrical/electronic subassemblies (ESA) and separate ESA intended to be fitted to the machinery are also dealt with. The following electromagnetic disturbance phenomena are evaluated:
- broadband and narrowband electromagnetic interference;
- electromagnetic field immunity;
- electrostatic discharge;
- conducted transients.
The machinery can have DC or AC or a combination of both as the internal electrical power supply system.
ISO 13766-1:2018 is not applicable to machines that are designed to be supplied by an external mains network or to phenomena caused by military applications.
NOTE 1 Grid-connected machines are covered by IEC 61000.
NOTE 2 Hybrid machines are covered in UN ECE R10-Rev. 5.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$343.00 NZD
|
|
| HardCopy |
$389.00 NZD
|
|
| Networkable PDF |
Price varies
|
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
4.1 General requirements
4.1.1 Fulfilment of requirements
4.1.2 Test specimen
4.1.3 Additional requirements for immunity tests
4.2 Specifications for broadband electromagnetic emission radiated from machinery
4.2.1 Method of measurement
4.2.2 Broadband reference limits
4.3 Specifications concerning narrowband electromagnetic emission radiated from machinery
4.3.1 Method of measurement
4.3.2 Narrowband reference limits
4.4 Specifications concerning the immunity of machinery to electromagnetic radiation
4.4.1 Test method
4.4.2 Machinery immunity reference limits
4.5 Specifications concerning broadband electromagnetic emissions radiated from ESA
4.5.1 Method of measurement
4.5.2 ESA broadband reference limits
4.6 Specifications concerning narrowband electromagnetic emissions radiated from ESA
4.6.1 Method of measurement
4.6.2 ESA narrowband reference limits
4.7 Specifications concerning the immunity of ESA to electromagnetic radiation
4.7.1 Method of testing
4.7.2 ESA immunity reference limits
4.8 Electrostatic discharge (ESD)
4.8.1 Method of testing
4.8.2 Reference limits
4.9 Conducted transients
4.9.1 General
4.9.2 Method of testing
4.9.3 Conducted emission — Reference limits
4.9.4 Conducted immunity — Reference limits and functional status
5 Exceptions
6 Test report
Annex A (normative) Reference limits
Annex B (normative) Method of measurement of radiated broadband electromagnetic emissions from machinery — Complete machine only
Annex C (normative) Method of measurement of radiated narrowband electromagnetic emissions from machinery — Complete machine only
Annex D (normative) Method of measurement of radiated broadband electromagnetic emissions from electrical/electronic sub-assemblies (ESA)
Annex E (normative) Method of measurement of radiated narrowband electromagnetic emissions from ESA
Annex F (informative) Guidance for selecting test specimen configuration and additional considerations
Bibliography
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 3200.1.2:2005
Medical electrical equipment - Part 1.2: General requirements for safety - Collateral Standard: Electromagnetic compatibility - Requirements and tests -
AS/NZS 3200.1.8:2005
Medical electrical equipment - Part 1.8: General requirements for safety - Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems -
AS/NZS 3696.21:2008
Wheelchairs - Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and motorized scooters
-
AS/NZS IEC 61000.2.2:2023
Electromagnetic compatibility (EMC), Part 2.2 Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
4.1 General requirements
4.1.1 Fulfilment of requirements
4.1.2 Test specimen
4.1.3 Additional requirements for immunity tests
4.2 Specifications for broadband electromagnetic emission radiated from machinery
4.2.1 Method of measurement
4.2.2 Broadband reference limits
4.3 Specifications concerning narrowband electromagnetic emission radiated from machinery
4.3.1 Method of measurement
4.3.2 Narrowband reference limits
4.4 Specifications concerning the immunity of machinery to electromagnetic radiation
4.4.1 Test method
4.4.2 Machinery immunity reference limits
4.5 Specifications concerning broadband electromagnetic emissions radiated from ESA
4.5.1 Method of measurement
4.5.2 ESA broadband reference limits
4.6 Specifications concerning narrowband electromagnetic emissions radiated from ESA
4.6.1 Method of measurement
4.6.2 ESA narrowband reference limits
4.7 Specifications concerning the immunity of ESA to electromagnetic radiation
4.7.1 Method of testing
4.7.2 ESA immunity reference limits
4.8 Electrostatic discharge (ESD)
4.8.1 Method of testing
4.8.2 Reference limits
4.9 Conducted transients
4.9.1 General
4.9.2 Method of testing
4.9.3 Conducted emission — Reference limits
4.9.4 Conducted immunity — Reference limits and functional status
5 Exceptions
6 Test report
Annex A (normative) Reference limits
Annex B (normative) Method of measurement of radiated broadband electromagnetic emissions from machinery — Complete machine only
Annex C (normative) Method of measurement of radiated narrowband electromagnetic emissions from machinery — Complete machine only
Annex D (normative) Method of measurement of radiated broadband electromagnetic emissions from electrical/electronic sub-assemblies (ESA)
Annex E (normative) Method of measurement of radiated narrowband electromagnetic emissions from ESA
Annex F (informative) Guidance for selecting test specimen configuration and additional considerations
Bibliography