ISO 11148-2:2011
Hand-held non-electric power tools — Safety requirements — Part 2: Cutting-off and crimping power tools
ISO 11148-2:2011 specifies safety requirements for hand-held non-electric power tools without rotation (hereinafter "cutting-off and crimping power tools") intended for cutting off wires, cables, etc., and for crimping, for instance connectors to cable ends. The cutting-off and crimping power tools can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended to be used by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer.
ISO 11148-2:2011 is applicable to crimping tools without a yoke, cutters, cutting-off tools, cutting pliers and crimping pliers.
ISO 11148-2:2011 is not applicable to special requirements and modifications of cutting-off and crimping power tools for the purpose of mounting them in fixtures, and it is not applicable to "double acting hydraulic rescue tools for fire and rescue service use".
ISO 11148-2:2011 deals with all significant hazards, hazardous situations or hazardous events relevant to cutting-off and crimping power tools when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of cutting-off and crimping power tools in potentially explosive atmospheres.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$256.00 NZD
|
|
| HardCopy |
$303.00 NZD
|
|
| Networkable PDF |
Price varies
|
1 Scope
2 Normative references
3 Terms and definitions
3.1 General terms and definitions
3.2 Terms and definitions related to cutting-off and crimping power tools
4 Safety requirements and/or protective measures
4.1 General
4.2 Mechanical safety
4.2.1 Surfaces, edges and corners
4.2.2 Supporting surface and stability
4.2.3 Hydraulic fluid ejection
4.2.4 Power tool construction
4.3 Thermal safety
4.4 Noise reduction
4.5 Vibration
4.6 Materials and substances processed, used or exhausted
4.6.1 Exhaust air or gas
4.6.2 Lubricants
4.7 Ergonomics
4.7.1 Design of the handle
4.7.2 Suspension device
4.8 Controls
4.8.1 Start-and-stop device
4.8.2 Unintentional start
4.8.3 Actuating forces
4.8.4 Two-hand control
5 Verification
5.1 General conditions for tests
5.2 Noise
5.3 Vibration
5.4 Unintentional start
5.5 Power tool construction
5.6 Structure of verification of safety requirements
6 Information for use
6.1 Marking, signs and written warnings
6.2 Instruction handbook
6.2.1 General
6.2.2 Operator's instructions
6.2.2.1 General
6.2.2.2 Statement of use
6.2.2.3 Allowance for user
6.2.2.4 General safety rules
6.2.2.5 Projectile hazards
6.2.2.6 Operating hazards
6.2.2.7 Repetitive motions hazards
6.2.2.8 Accessory hazards
6.2.2.9 Workplace hazards
6.2.2.10 Dust and fume hazards
6.2.2.11 Noise hazards
6.2.2.12 Vibration hazards
6.2.3 Additional safety instructions for pneumatic power tools
6.2.4 Additional safety instructions for hydraulic power tools
6.2.5 Specific safety instructions
6.3 Operating instructions
6.4 Data
6.4.1 General
6.4.2 Noise
6.4.2.1 Declaration of emission
6.4.2.2 Additional information
6.4.3 Vibration
6.4.3.1 Declaration of emission
6.4.3.2 Additional information
6.5 Maintenance instructions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
BS 5344:1985
Methods for performance tests for rotary and percussive pneumatic tools
-
BS 6268:1982
Method of measurement for reaction torque and torque impulse from hand-held pneumatic assembly tools for installing threaded fasteners
-
BS 673:1984
Specification for shanks for pneumatic tools and fitting dimensions of chuck bushings
-
BS EN ISO 11148-1:2011
Hand-held non-electric power tools. Safety requirements, Assembly power tools for non-threaded mechanical fasteners
1 Scope
2 Normative references
3 Terms and definitions
3.1 General terms and definitions
3.2 Terms and definitions related to cutting-off and crimping power tools
4 Safety requirements and/or protective measures
4.1 General
4.2 Mechanical safety
4.2.1 Surfaces, edges and corners
4.2.2 Supporting surface and stability
4.2.3 Hydraulic fluid ejection
4.2.4 Power tool construction
4.3 Thermal safety
4.4 Noise reduction
4.5 Vibration
4.6 Materials and substances processed, used or exhausted
4.6.1 Exhaust air or gas
4.6.2 Lubricants
4.7 Ergonomics
4.7.1 Design of the handle
4.7.2 Suspension device
4.8 Controls
4.8.1 Start-and-stop device
4.8.2 Unintentional start
4.8.3 Actuating forces
4.8.4 Two-hand control
5 Verification
5.1 General conditions for tests
5.2 Noise
5.3 Vibration
5.4 Unintentional start
5.5 Power tool construction
5.6 Structure of verification of safety requirements
6 Information for use
6.1 Marking, signs and written warnings
6.2 Instruction handbook
6.2.1 General
6.2.2 Operator's instructions
6.2.2.1 General
6.2.2.2 Statement of use
6.2.2.3 Allowance for user
6.2.2.4 General safety rules
6.2.2.5 Projectile hazards
6.2.2.6 Operating hazards
6.2.2.7 Repetitive motions hazards
6.2.2.8 Accessory hazards
6.2.2.9 Workplace hazards
6.2.2.10 Dust and fume hazards
6.2.2.11 Noise hazards
6.2.2.12 Vibration hazards
6.2.3 Additional safety instructions for pneumatic power tools
6.2.4 Additional safety instructions for hydraulic power tools
6.2.5 Specific safety instructions
6.3 Operating instructions
6.4 Data
6.4.1 General
6.4.2 Noise
6.4.2.1 Declaration of emission
6.4.2.2 Additional information
6.4.3 Vibration
6.4.3.1 Declaration of emission
6.4.3.2 Additional information
6.5 Maintenance instructions