ISO 11148-11:2011
Hand-held non-electric power tools — Safety requirements — Part 11: Nibblers and shears
ISO 11148-11:2011 specifies safety requirements for hand-held non-electric power tools (hereinafter "nibblers and shears") with a reciprocating movement for nibbling and shearing. The nibblers and shears can be powered by compressed air or hydraulic fluid and are intended to be used by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer.
ISO 11148-11:2011 is applicable to nibblers and shears.
ISO 11148-11:2011 is not applicable to special requirements and modifications of nibblers and shears for the purpose of mounting them in a fixture.
ISO 11148-11:2011 deals with all significant hazards, hazardous situations or hazardous events relevant to nibblers and shears when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of nibblers and shears in potentially explosive atmospheres.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$256.00 NZD
|
|
| HardCopy |
$303.00 NZD
|
|
| Networkable PDF |
Price varies
|
1 Scope
2 Normative references
3 Terms and definitions
3.1 General definitions
3.2 Definitions related to nibblers and shears
4 Safety requirements and/or protective measures
4.1 General
4.2 Mechanical safety
4.2.1 Surfaces, edges and corners
4.2.2 Supporting surface and stability
4.2.3 Hydraulic fluid ejection
4.2.4 Power tool construction
4.3 Thermal safety
4.4 Noise reduction
4.5 Vibration
4.6 Materials and substances processed, used or exhausted
4.6.1 Exhaust air or gas
4.6.2 Lubricants
4.6.3 Dust and fumes
4.7 Ergonomics
4.7.1 Design of the handle
4.7.2 Suspension device
4.8 Controls
4.8.1 Start-and-stop device
4.8.2 Unintentional start
4.8.3 Actuating forces
4.8.4 Two-hand control
5 Verification
5.1 General conditions for tests
5.2 Noise
5.3 Vibration
5.4 Unintentional start
5.5 Power tool construction
5.6 Structure of verification
6 Information for use
6.1 Marking, signs and written warnings
6.2 Instruction handbook
6.2.1 General
6.2.2 Operator's instructions
6.2.2.1 General
6.2.2.2 Statement of use
6.2.2.3 Allowance for user
6.2.2.4 General safety rules
6.2.2.5 Projectile hazards
6.2.2.6 Operating hazards
6.2.2.7 Repetitive motions hazards
6.2.2.8 Accessory hazards
6.2.2.9 Workplace hazards
6.2.2.10 Dust and fume hazards
6.2.2.11 Noise hazards
6.2.2.12 Vibration hazards
6.2.3 Additional safety instructions for pneumatic power tools
6.2.4 Additional safety instructions for hydraulic power tools
6.2.5 Specific safety instructions
6.3 Operating instructions
6.4 Data
6.4.1 General
6.4.2 Noise
6.4.2.1 Declaration of emission
6.4.2.2 Additional information
6.4.3 Vibration
6.4.3.1 Declaration of emission
6.4.3.2 Additional information
6.5 Maintenance instructions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
BS 5344:1985
Methods for performance tests for rotary and percussive pneumatic tools
-
BS 6268:1982
Method of measurement for reaction torque and torque impulse from hand-held pneumatic assembly tools for installing threaded fasteners
-
BS 673:1984
Specification for shanks for pneumatic tools and fitting dimensions of chuck bushings
-
BS EN ISO 11148-1:2011
Hand-held non-electric power tools. Safety requirements, Assembly power tools for non-threaded mechanical fasteners
1 Scope
2 Normative references
3 Terms and definitions
3.1 General definitions
3.2 Definitions related to nibblers and shears
4 Safety requirements and/or protective measures
4.1 General
4.2 Mechanical safety
4.2.1 Surfaces, edges and corners
4.2.2 Supporting surface and stability
4.2.3 Hydraulic fluid ejection
4.2.4 Power tool construction
4.3 Thermal safety
4.4 Noise reduction
4.5 Vibration
4.6 Materials and substances processed, used or exhausted
4.6.1 Exhaust air or gas
4.6.2 Lubricants
4.6.3 Dust and fumes
4.7 Ergonomics
4.7.1 Design of the handle
4.7.2 Suspension device
4.8 Controls
4.8.1 Start-and-stop device
4.8.2 Unintentional start
4.8.3 Actuating forces
4.8.4 Two-hand control
5 Verification
5.1 General conditions for tests
5.2 Noise
5.3 Vibration
5.4 Unintentional start
5.5 Power tool construction
5.6 Structure of verification
6 Information for use
6.1 Marking, signs and written warnings
6.2 Instruction handbook
6.2.1 General
6.2.2 Operator's instructions
6.2.2.1 General
6.2.2.2 Statement of use
6.2.2.3 Allowance for user
6.2.2.4 General safety rules
6.2.2.5 Projectile hazards
6.2.2.6 Operating hazards
6.2.2.7 Repetitive motions hazards
6.2.2.8 Accessory hazards
6.2.2.9 Workplace hazards
6.2.2.10 Dust and fume hazards
6.2.2.11 Noise hazards
6.2.2.12 Vibration hazards
6.2.3 Additional safety instructions for pneumatic power tools
6.2.4 Additional safety instructions for hydraulic power tools
6.2.5 Specific safety instructions
6.3 Operating instructions
6.4 Data
6.4.1 General
6.4.2 Noise
6.4.2.1 Declaration of emission
6.4.2.2 Additional information
6.4.3 Vibration
6.4.3.1 Declaration of emission
6.4.3.2 Additional information
6.5 Maintenance instructions