ISO 10360-8:2013
Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 8: CMMs with optical distance sensors
ISO 10360-8:2013 specifies the acceptance tests for verifying the performance of a CMM (coordinate measuring machine) when measuring lengths as stated by the manufacturer. It also specifies the reverification tests that enable the user to periodically reverify the performance of the CMM. The acceptance and reverification tests are applicable only to Cartesian CMMs with optical distance sensors. While it does not explicitly apply to non-Cartesian CMMs, the parties may apply ISO 10360-8:2013 to non-Cartesian CMMs by mutual agreement.
It is not intended to be applicable to CMMs whose measuring volume is significantly smaller than the size of the test sphere. However, the principle, artefacts and procedure of the test described are useful for the acceptance and reverification tests of those CMMs ? either as it is or with modifying the parameters such as the size of the test artefacts and the number of measurements.
ISO 10360-8:2013 specifies performance requirements that can be assigned by the manufacturer or the user of the CMM, the manner of execution of the acceptance and reverification tests to demonstrate the stated requirements, rules for verifying conformance, and applications for which the acceptance and reverification tests can be used.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$386.00 NZD
|
|
| HardCopy |
$430.00 NZD
|
|
| Networkable PDF |
Price varies
|
Section sec_1
Section sec_2
Section sec_3
Section sec_3.1
Section sec_3.2
Section sec_3.3
Section sec_3.4
Table tab_a
Figure fig_1
Section sec_3.5
Table tab_b
Figure fig_2
Table tab_c
Figure fig_3
Section sec_3.6
Section sec_3.7
Section sec_3.8
Section sec_3.9
Section sec_3.10
Section sec_3.11
Section sec_3.12
Section sec_3.13
Section sec_3.14
Section sec_3.15
Section sec_3.16
Section sec_3.17
Section sec_3.18
Section sec_4
Table tab_1
Section sec_5
Section sec_5.1
Section sec_5.2
Section sec_5.3
Section sec_5.4
Section sec_5.5
Section sec_5.6
Section sec_5.7
Section sec_5.8
Section sec_5.9
Section sec_6
Section sec_6.1
Section sec_6.2
Section sec_6.2.1
Section sec_6.2.2
Table tab_j
Figure fig_4
Table tab_k
Figure fig_5
Section sec_6.2.3
Section sec_6.2.3.1
Section sec_6.2.3.2
Section sec_6.2.3.3
Section sec_6.2.4
Section sec_6.2.4.1
Table tab_l
Figure fig_6
Section sec_6.2.4.2
Section sec_6.2.4.2.1
Section sec_6.2.4.2.2
Section sec_6.2.4.2.3
Section sec_6.2.4.2.4
Section sec_6.2.4.3
Section sec_6.2.4.3.1
Section sec_6.2.4.3.2
Section sec_6.2.4.3.3
Section sec_6.3
Section sec_6.3.1
Section sec_6.3.2
Section sec_6.3.3
Figure fig_7
Table tab_2
Section sec_6.3.4
Section sec_6.3.5
Section sec_6.3.5.1
Section sec_6.3.5.2
Section sec_6.3.5.3
Section sec_6.4
Section sec_6.4.1
Section sec_6.4.2
Section sec_6.4.3
Figure fig_8
Table tab_3
Section sec_6.4.4
Section sec_7
Section sec_7.1
Section sec_7.1.1
Section sec_7.1.2
Section sec_7.1.2.1
Section sec_7.1.2.2
Section sec_7.1.2.3
Section sec_7.1.2.4
Section sec_7.1.2.5
Section sec_7.1.2.6
Section sec_7.2
Section sec_8
Section sec_8.1
Section sec_8.2
Section sec_8.3
Section sec_9
Table tab_4
Annex sec_A
Annex sec_A.1
Annex sec_A.2
Annex sec_A.2.1
Annex sec_A.2.2
Figure fig_A.1
Annex sec_A.2.3
Figure fig_A.2
Annex sec_A.2.4
Figure fig_A.3
Annex sec_A.3
Figure fig_A.4
Table tab_m
Figure fig_A.5
Annex sec_B
Annex sec_B.1
Annex sec_B.2
Annex sec_B.2.1
Table tab_n
Figure fig_B.1
Annex sec_B.2.2
Annex sec_B.2.3
Annex sec_B.2.4
Annex sec_B.2.5
Annex sec_B.3
Annex sec_B.3.1
Table tab_o
Figure fig_B.2
Annex sec_B.3.2
Annex sec_B.3.3
Annex sec_B.3.4
Annex sec_B.3.5
Annex sec_B.4
Annex sec_B.4.1
Table tab_p
Figure fig_B.3
Annex sec_B.4.2
Annex sec_B.4.3
Annex sec_B.4.3.1
Annex sec_B.4.3.2
Annex sec_B.4.3.3
Annex sec_B.4.3.4
Annex sec_B.4.3.5
Annex sec_C
Annex sec_C.1
Annex sec_C.2
Annex sec_C.3
Figure fig_C.1
Figure fig_C.2
Annex sec_D
Annex sec_D.1
Annex sec_D.2
Table tab_D.1
Annex sec_D.3
Annex sec_D.3.1
Annex sec_D.3.2
Annex sec_D.3.3
Table tab_q
Figure fig_D.1
Annex sec_D.3.4
Annex sec_D.4
Annex sec_D.4.1
Annex sec_D.4.1.1
Annex sec_D.4.1.2
Annex sec_D.4.2
Annex sec_D.5
Annex sec_D.5.1
Annex sec_D.5.2
Annex sec_D.5.3
Annex sec_D.6
Table tab_D.2
Annex sec_E
Annex sec_E.1
Annex sec_E.2
Annex sec_E.3
Table tab_E.1
Annex sec_E.4
Reference ref_1
Reference ref_2
Reference ref_3
Reference ref_4
Reference ref_5
Reference ref_6
Bibliography
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 Requirements for metrological characteristics
5.1 Environmental conditions
5.2 Operating conditions
5.3 Probing form error
5.4 Probing dispersion value
5.5 Probing size error
5.6 Probing size error All
5.7 Length measurement error
5.8 Flat form measurement error
5.9 Workpiece loading effects
6 Acceptance tests and reverification tests
6.1 General
6.2 Probing characteristics
6.3 Length measurement error
6.4 Flat form measurement error
7 Compliance with specifications
7.1 Acceptance test
7.2 Reverification test
8 Applications
8.1 Acceptance test
8.2 Reverification test
8.3 Interim check
9 Indication in product documentation and data sheets
Annex A (informative) Structural resolution test
Annex B (normative) Artefacts that represent a calibrated test length
Annex C (informative) Alignment of artefacts
Annex D (normative) Articulated location value of CMMs with articulating probing system for optical distance sensors
Annex E (informative) Relation to the GPS matrix model
Bibliography
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
BS 1044-1:2008
Specification for gauge blanks, Plug, ring and calliper gauges
-
BS 1054:1975
Specification for engineers' comparators for external measurement
-
BS 1347:1986
Specification for architects', engineers' and surveyors' metric scale rules
-
BS 1643:2008
Specification for precision vernier height gauges
Section sec_1
Section sec_2
Section sec_3
Section sec_3.1
Section sec_3.2
Section sec_3.3
Section sec_3.4
Table tab_a
Figure fig_1
Section sec_3.5
Table tab_b
Figure fig_2
Table tab_c
Figure fig_3
Section sec_3.6
Section sec_3.7
Section sec_3.8
Section sec_3.9
Section sec_3.10
Section sec_3.11
Section sec_3.12
Section sec_3.13
Section sec_3.14
Section sec_3.15
Section sec_3.16
Section sec_3.17
Section sec_3.18
Section sec_4
Table tab_1
Section sec_5
Section sec_5.1
Section sec_5.2
Section sec_5.3
Section sec_5.4
Section sec_5.5
Section sec_5.6
Section sec_5.7
Section sec_5.8
Section sec_5.9
Section sec_6
Section sec_6.1
Section sec_6.2
Section sec_6.2.1
Section sec_6.2.2
Table tab_j
Figure fig_4
Table tab_k
Figure fig_5
Section sec_6.2.3
Section sec_6.2.3.1
Section sec_6.2.3.2
Section sec_6.2.3.3
Section sec_6.2.4
Section sec_6.2.4.1
Table tab_l
Figure fig_6
Section sec_6.2.4.2
Section sec_6.2.4.2.1
Section sec_6.2.4.2.2
Section sec_6.2.4.2.3
Section sec_6.2.4.2.4
Section sec_6.2.4.3
Section sec_6.2.4.3.1
Section sec_6.2.4.3.2
Section sec_6.2.4.3.3
Section sec_6.3
Section sec_6.3.1
Section sec_6.3.2
Section sec_6.3.3
Figure fig_7
Table tab_2
Section sec_6.3.4
Section sec_6.3.5
Section sec_6.3.5.1
Section sec_6.3.5.2
Section sec_6.3.5.3
Section sec_6.4
Section sec_6.4.1
Section sec_6.4.2
Section sec_6.4.3
Figure fig_8
Table tab_3
Section sec_6.4.4
Section sec_7
Section sec_7.1
Section sec_7.1.1
Section sec_7.1.2
Section sec_7.1.2.1
Section sec_7.1.2.2
Section sec_7.1.2.3
Section sec_7.1.2.4
Section sec_7.1.2.5
Section sec_7.1.2.6
Section sec_7.2
Section sec_8
Section sec_8.1
Section sec_8.2
Section sec_8.3
Section sec_9
Table tab_4
Annex sec_A
Annex sec_A.1
Annex sec_A.2
Annex sec_A.2.1
Annex sec_A.2.2
Figure fig_A.1
Annex sec_A.2.3
Figure fig_A.2
Annex sec_A.2.4
Figure fig_A.3
Annex sec_A.3
Figure fig_A.4
Table tab_m
Figure fig_A.5
Annex sec_B
Annex sec_B.1
Annex sec_B.2
Annex sec_B.2.1
Table tab_n
Figure fig_B.1
Annex sec_B.2.2
Annex sec_B.2.3
Annex sec_B.2.4
Annex sec_B.2.5
Annex sec_B.3
Annex sec_B.3.1
Table tab_o
Figure fig_B.2
Annex sec_B.3.2
Annex sec_B.3.3
Annex sec_B.3.4
Annex sec_B.3.5
Annex sec_B.4
Annex sec_B.4.1
Table tab_p
Figure fig_B.3
Annex sec_B.4.2
Annex sec_B.4.3
Annex sec_B.4.3.1
Annex sec_B.4.3.2
Annex sec_B.4.3.3
Annex sec_B.4.3.4
Annex sec_B.4.3.5
Annex sec_C
Annex sec_C.1
Annex sec_C.2
Annex sec_C.3
Figure fig_C.1
Figure fig_C.2
Annex sec_D
Annex sec_D.1
Annex sec_D.2
Table tab_D.1
Annex sec_D.3
Annex sec_D.3.1
Annex sec_D.3.2
Annex sec_D.3.3
Table tab_q
Figure fig_D.1
Annex sec_D.3.4
Annex sec_D.4
Annex sec_D.4.1
Annex sec_D.4.1.1
Annex sec_D.4.1.2
Annex sec_D.4.2
Annex sec_D.5
Annex sec_D.5.1
Annex sec_D.5.2
Annex sec_D.5.3
Annex sec_D.6
Table tab_D.2
Annex sec_E
Annex sec_E.1
Annex sec_E.2
Annex sec_E.3
Table tab_E.1
Annex sec_E.4
Reference ref_1
Reference ref_2
Reference ref_3
Reference ref_4
Reference ref_5
Reference ref_6
Bibliography
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 Requirements for metrological characteristics
5.1 Environmental conditions
5.2 Operating conditions
5.3 Probing form error
5.4 Probing dispersion value
5.5 Probing size error
5.6 Probing size error All
5.7 Length measurement error
5.8 Flat form measurement error
5.9 Workpiece loading effects
6 Acceptance tests and reverification tests
6.1 General
6.2 Probing characteristics
6.3 Length measurement error
6.4 Flat form measurement error
7 Compliance with specifications
7.1 Acceptance test
7.2 Reverification test
8 Applications
8.1 Acceptance test
8.2 Reverification test
8.3 Interim check
9 Indication in product documentation and data sheets
Annex A (informative) Structural resolution test
Annex B (normative) Artefacts that represent a calibrated test length
Annex C (informative) Alignment of artefacts
Annex D (normative) Articulated location value of CMMs with articulating probing system for optical distance sensors
Annex E (informative) Relation to the GPS matrix model
Bibliography