AS/NZS IEC 60839.11.1:2019
Alarm and electronic security systems - Part 11-1: Electronic access control systems - System and components requirements
Objective of this Standard is to specify the minimum functionality, performance requirements and test methods for electronic access control systems and components used for physical access (entry and exit) in and around buildings and protected areas. This Standard is identical with, and has been reproduced from, IEC 60839-11-1:2013, Alarm and electronic security systems - Part 11-1: Electronic access control systems - System and components requirements.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$171.90 NZD
|
|
| HardCopy |
$191.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS IEC 60839.11.1:2019 Alarm and electronic security systems Electronic access control systems - System and components requirements
CONTENTS
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviations
5 Conceptual models and system architecture
6 System performance functionality requirements
6.1 Classification methodology and functionalities – Determining the levels of protection
6.2 Access point interface requirements
6.2.1 Portal release timing
6.2.2 Access control
6.2.3 Portal status
6.3 Indication and annunciation (display, alert, logging) requirements
6.3.1 Annunciation
6.3.2 Display
6.3.3 Alert
6.3.4 Logging
6.4 Recognition requirements
6.5 Duress signalling requirements
6.6 Overriding requirements
6.7 Communication requirements
6.8 System self-protection requirements
6.9 Power supply requirements
7 Environmental and EMC (immunity) requirements
8 Test methods
8.1 General conditions
8.1.1 Atmospheric conditions for tests
8.1.2 Operating conditions for tests
8.1.3 Specimen configuration
8.1.4 Mounting arrangements
8.1.5 Tolerances
8.1.6 Provisions for tests
8.1.7 Optional functions
8.2 Reduced functional test
8.3 Functional tests for access point interface
8.3.1 Object of the test
8.3.2 Principle
8.3.3 Procedure
8.3.4 Criteria for compliance
8.4 Functional tests for indication/annunciation (displaying, alert and logging)
8.4.1 Object of the test
8.4.2 Principles
8.4.3 Test procedure
8.4.4 Criteria for compliance
8.5 Test methods for recognition functionalities
8.5.1 Object of the test
8.5.2 Principles
8.5.3 Test procedure
8.5.4 Criteria for compliance
8.6 Functional tests for duress signalling
8.6.1 Object of the test
8.6.2 Principles
8.6.3 Test procedure (ref. Table 5, lines 1 to 3)
8.6.4 Criteria for compliance
8.7 Functional tests for overriding
8.7.1 Object of the test
8.7.2 Principles
8.7.3 Test procedure (ref. Table 6, lines 1 to 7)
8.7.4 Criteria for compliance
8.8 Functional tests for communication and self-protection
8.8.1 Object of the test
8.8.2 Principles
8.8.3 Test procedure (ref. Table 7, lines 1 to 28)
8.8.4 Criteria for compliance
8.9 Power supply requirements
8.9.1 Test of standby power duration
8.9.2 Test of charger and standby power source capacity
8.9.3 Test for low or missing battery condition
8.10 Environmental and EMC (immunity) tests
8.10.1 Test procedure
8.10.2 Initial measurements
8.10.3 State of the specimen during conditioning
8.10.4 Conditioning
8.10.5 Measurement during conditioning
8.10.6 Final measurements
8.10.7 Criteria for compliance
8.11 Test report
9 Documentation and marking
9.1 Documentation
9.2 Marking
Annex A (normative) Timing diagram
Bibliography
Figures
Figure 1 – Conceptual model
Figure 2 – Typical architecture of an electronic access control system
Figure 3 – Example of system test configuration
Figure A.1 – Timing diagram
Tables
Table 1 – Grade classification
Table 2 – Access point interface requirements (1 of 2)
Table 3 – Indication and annunciation requirements (1 of 3)
Table 4 – Recognition requirements (1 of 2)
Table 5 – Duress signalling requirements
Table 6 – Overriding requirements
Table 7 – System self-protection requirements (1 of 2)
Table 8 – Power supply requirements
Table 9 – Environmental and EMC (immunity) requirements (1 of 2)
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 4869.1:2006
Maritime Survivor Locating Systems (MSLS) - Operating on 121.5 MHz
-
AS/NZS 4869.2:2010
Maritime Survivor Locating Systems (MSLS) - Operating on frequencies other than 121.5 MHz
-
AS/NZS 4869.2:2010 A1
Maritime Survivor Locating Systems (MSLS) - Operating on frequencies other than 121.5 MHz: Amendment 1:2013 -
AS/NZS 4869.3:2015
Maritime survivor locating systems (MSLS) - Part 3: Maritime survivor locating devices (MSLD) - Operating on 156.575 MHz and/or 161.975 MHz/162.025 MHz
AS/NZS IEC 60839.11.1:2019 Alarm and electronic security systems Electronic access control systems - System and components requirements
CONTENTS
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviations
5 Conceptual models and system architecture
6 System performance functionality requirements
6.1 Classification methodology and functionalities – Determining the levels of protection
6.2 Access point interface requirements
6.2.1 Portal release timing
6.2.2 Access control
6.2.3 Portal status
6.3 Indication and annunciation (display, alert, logging) requirements
6.3.1 Annunciation
6.3.2 Display
6.3.3 Alert
6.3.4 Logging
6.4 Recognition requirements
6.5 Duress signalling requirements
6.6 Overriding requirements
6.7 Communication requirements
6.8 System self-protection requirements
6.9 Power supply requirements
7 Environmental and EMC (immunity) requirements
8 Test methods
8.1 General conditions
8.1.1 Atmospheric conditions for tests
8.1.2 Operating conditions for tests
8.1.3 Specimen configuration
8.1.4 Mounting arrangements
8.1.5 Tolerances
8.1.6 Provisions for tests
8.1.7 Optional functions
8.2 Reduced functional test
8.3 Functional tests for access point interface
8.3.1 Object of the test
8.3.2 Principle
8.3.3 Procedure
8.3.4 Criteria for compliance
8.4 Functional tests for indication/annunciation (displaying, alert and logging)
8.4.1 Object of the test
8.4.2 Principles
8.4.3 Test procedure
8.4.4 Criteria for compliance
8.5 Test methods for recognition functionalities
8.5.1 Object of the test
8.5.2 Principles
8.5.3 Test procedure
8.5.4 Criteria for compliance
8.6 Functional tests for duress signalling
8.6.1 Object of the test
8.6.2 Principles
8.6.3 Test procedure (ref. Table 5, lines 1 to 3)
8.6.4 Criteria for compliance
8.7 Functional tests for overriding
8.7.1 Object of the test
8.7.2 Principles
8.7.3 Test procedure (ref. Table 6, lines 1 to 7)
8.7.4 Criteria for compliance
8.8 Functional tests for communication and self-protection
8.8.1 Object of the test
8.8.2 Principles
8.8.3 Test procedure (ref. Table 7, lines 1 to 28)
8.8.4 Criteria for compliance
8.9 Power supply requirements
8.9.1 Test of standby power duration
8.9.2 Test of charger and standby power source capacity
8.9.3 Test for low or missing battery condition
8.10 Environmental and EMC (immunity) tests
8.10.1 Test procedure
8.10.2 Initial measurements
8.10.3 State of the specimen during conditioning
8.10.4 Conditioning
8.10.5 Measurement during conditioning
8.10.6 Final measurements
8.10.7 Criteria for compliance
8.11 Test report
9 Documentation and marking
9.1 Documentation
9.2 Marking
Annex A (normative) Timing diagram
Bibliography
Figures
Figure 1 – Conceptual model
Figure 2 – Typical architecture of an electronic access control system
Figure 3 – Example of system test configuration
Figure A.1 – Timing diagram
Tables
Table 1 – Grade classification
Table 2 – Access point interface requirements (1 of 2)
Table 3 – Indication and annunciation requirements (1 of 3)
Table 4 – Recognition requirements (1 of 2)
Table 5 – Duress signalling requirements
Table 6 – Overriding requirements
Table 7 – System self-protection requirements (1 of 2)
Table 8 – Power supply requirements
Table 9 – Environmental and EMC (immunity) requirements (1 of 2)
AS/NZS IEC 60839.11.1:2019
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.