AS/NZS 60745.2.3:2011
Hand-held motor-operated electric tools - Safety - Part 2.3: Particular requirements for grinders, polishers and disk-type sanders
Reproduced from IEC 60745-2-3 Ed 2.1 with national modifications. Applies to grinders, polishers and disk-type sanders, including angle, straight and vertical tools, with a rated capacity not exceeding 230 mm. For grinders, the rated speed does not exceed a peripheral speed of the accessory of 80 m/s at rated capacity. Does not apply to dedicated cut-off machines which are covered by IEC 60745-2-22.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$139.50 NZD
|
|
| HardCopy |
$155.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
Standards New Zealand
Australian/New Zealand Standards
International Involvement
Visit our Web sites
___________
Part 2.3: Particular requirements for grinders, polishers and disk-type sanders
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 General conditions for the tests
6 Void
7 Classification
8 Marking and instructions
9 Protection against access to live parts
10 Starting
11 Input and current
12 Heating
13 Leakage current
14 Moisture resistance
15 Electric strength
16 Overload protection of transformers and associated circuits
17 Endurance
18 Abnormal operation
19 Mechanical hazards
20 Mechanical strength
21 Construction
22 Internal wiring
23 Components
24 Supply connection and external flexible cords
25 Terminals for external conductors
26 Provision for earthing
27 Screws and connections
28 Creepage distances, clearances and distances through insulation
29 Resistance to heat, fire and tracking
30 Resistance to rusting
31 Radiation, toxicity and similar hazards
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand - Energy Safety
Section: Schedule 4, Clause 6
Citation context:Refers to 60745.2.3:2011(AS/NZS)A1. Grinders, polishers, and disc-type sanders: Standard E in conjunction with IEC 60745-2-3 Ed 2.2 as modified by AS/NZS 60745.2.3:2013 (sic), or...
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand - Energy Safety
Section: Schedule 4, Clause 6
Citation context:Grinders, polishers, and disc-type sanders: Standard E in conjunction with IEC 60745-2-3 Ed 2.2 as modified by AS/NZS 60745.2.3:2013 (sic), or until 31/05/2015, standard E in conjunction with IEC 60745-2-3 Ed 2.1 as modified by AS/NZS 60745:2011. NOTE: 2013 citation is an error, and should refer to 2011 edition, including all amendments.
Similar Standards
-
AS/NZS 60335.2.45:2012 (Excludes IEC text)
Household and similar electrical appliances - Safety - Part 2.45: Particular requirements for portable heating tools and similar appliances -
AS/NZS 60335.2.45:2012 (Includes IEC text)
Household and similar electrical appliances - Safety - Part 2.45: Particular requirements for portable heating tools and similar appliances -
AS/NZS 60745.1:2009
Hand-held motor-operated electrical tools - Safety - General requirements -
AS/NZS 60745.1:2009 A1
Hand-held motor-operated electric Tools - Safety - Part 1: General requirements Amendment 1
Standards New Zealand
Australian/New Zealand Standards
International Involvement
Visit our Web sites
___________
Part 2.3: Particular requirements for grinders, polishers and disk-type sanders
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 General conditions for the tests
6 Void
7 Classification
8 Marking and instructions
9 Protection against access to live parts
10 Starting
11 Input and current
12 Heating
13 Leakage current
14 Moisture resistance
15 Electric strength
16 Overload protection of transformers and associated circuits
17 Endurance
18 Abnormal operation
19 Mechanical hazards
20 Mechanical strength
21 Construction
22 Internal wiring
23 Components
24 Supply connection and external flexible cords
25 Terminals for external conductors
26 Provision for earthing
27 Screws and connections
28 Creepage distances, clearances and distances through insulation
29 Resistance to heat, fire and tracking
30 Resistance to rusting
31 Radiation, toxicity and similar hazards
Previous versions
AS/NZS 60745.2.3:2011
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.