AS/NZS 1418.9:1996
Cranes (including hoists and winches), Part 9: Vehicle hoists
Specifies requirements for vehicle hoists as defined in AS 2549. It applies to wheel-supporting, axle-supporting and frame-supporting vehicle hoists and their accessories. The Standard does not apply to vehicle jacks (see AS/NZS 2693), trolley jacks (AS/NZS 2615), car stackers and vehicle roll-over equipment. Sections are included on their design, installation, testing and operation and maintenance requirements. Appendices provide guidance on deflection limits, hazards and illustrations of typical vehicle hoists. It is intended for use with AS 1418.1 and AS/NZS 2550.9 which provide guidance on the safe use of vehicle hoists.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$94.50 NZD
|
|
| HardCopy |
$105.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 1418.9:1996 CRANES (INCLUDING HOISTS AND WINCHES) - VEHICLE HOISTS
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 NEW DESIGN AND INNOVATIONS
1.3 TYPES
1.4 REFERENCED DOCUMENTS
1.5 DEFINITIONS
1.5.1 Auxiliary adaptor
1.5.2 Hoisting mechanism
1.6 RATING VALUES
1.7 RATED CAPACITY
1.8 RANGE OF HOISTING
1.9 WORKING VELOCITIES
1.10 TEST CERTIFICATE
1.11 MARKING
SECTION 2 DESIGN
2.1 BASIS OF DESIGN
2.2 CLASSIFICATION
2.3 DESIGN FOR STRENGTH
2.3.1 General
2.3.2 Load distribution
2.3.3 Loading combinations
2.4 DEFLECTION
2.5 LATERAL LOADING
2.5.1 General
2.5.2 Horizontal loading
2.5.3 Wind loading
2.5.4 Seismic loading
2.6 STABILITY
2.7 WORKING VELOCITIES
2.8 SAFETY DEVICES
2.9 IMPACT FORCES
2.10 WELDS
2.11 ELECTRICAL EQUIPMENT AND CONTROLS
2.12 HYDRAULIC EQUIPMENT AND CONTROLS
2.13 PNEUMATIC EQUIPMENT AND CONTROLS
2.14 BURSTING SAFETY FACTOR FOR HYDRAULIC AND PNEUMATIC SYSTEMS
2.15 COMPONENTS
2.15.1 Axle and chassis supports
2.15.2 Auxiliary adaptors
2.15.3 Ramps
2.15.4 Runways
2.15.5 Safety locking of arms
2.15.6 Support pads
2.15.7 Wheel stops (wheel supporting hoists)
2.15.8 Anti-creep device
2.15.9 Dropper bars
2.15.10 Fixed platforms, walkways and ladders
2.15.11 Surfaces
2.15.12 Protection of personnel
2.15.13 Controls
2.16 VEHICLE HOISTS - HYDRAULIC
2.16.1 Low-oil control
2.16.2 Air/oil tanks
2.16.3 Air pocket elimination
2.16.4 Hydraulic system
2.16.5 Packing
2.16.6 Speed control
2.16.7 Pressure relief valve setting
2.17 VEHICLE HOISTS - MECHANICAL
2.17.1 Steel wire rope or chain suspension
2.17.2 Screw-suspended vehicle hoists
2.18 VEHICLE HOISTS - HYDROMECHANICAL
2.19 VEHICLE HOISTS - MOVABLE
2.20 HOIST MOTION LIMITS
2.21 MAINTENANCE
2.21.1 Accessibility for maintenance
2.21.2 Lubrication
SECTION 3 INSTALLATION
3.1 GENERAL
3.2 SAFETY COLOUR CODING
3.3 PROTECTION OF HYDRAULIC CYLINDER CASING
3.4 LOCATION OF VEHICLE HOISTS
3.5 VEHICLE CLEARANCE
3.6 FUNCTIONAL TESTS
3.7 DEMONSTRATION
SECTION 4 TYPE TEST REQUIREMENTS
4.1 GENERAL
4.2 UNLADEN TESTS
4.3 TEST LOADS
4.4 LADEN TESTS
4.5 COMPLIANCE WITH TESTS
SECTION 5 OPERATION AND MAINTENANCE INSTRUCTIONS
5.1 GENERAL
5.2 INFORMATION FOR MAINTENANCE TECHNICIANS
5.3 SUITABILITY FOR USE
APPENDIX A - ILLUSTRATIONS OF TYPICAL VEHICLE HOISTS
APPENDIX B - GUIDANCE ON DEFLECTION LIMITS FOR VEHICLE HOISTS IN THE STATIC CONDITION
APPENDIX C - TYPICAL HAZARDS
C1 GENERAL
C2 SAFETY DISTANCES
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
BS 6037-1:2017
Planning, design, installation and use of permanently installed access equipment. Code of practice, Suspended access equipment
-
BS 6037-1:2017 - TC
Tracked Changes. Planning, design, installation and use of permanently installed access equipment. Code of practice, Suspended access equipment
-
BS 6037-2:2020
Planning, design, installation and use of permanently installed access equipment, Travelling ladders and gantries. Code of practice
-
BS 6440:2011
Powered vertical lifting platforms having non-enclosed or partially enclosed liftways intended for use by persons with impaired mobility. Specification
AS/NZS 1418.9:1996 CRANES (INCLUDING HOISTS AND WINCHES) - VEHICLE HOISTS
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 NEW DESIGN AND INNOVATIONS
1.3 TYPES
1.4 REFERENCED DOCUMENTS
1.5 DEFINITIONS
1.5.1 Auxiliary adaptor
1.5.2 Hoisting mechanism
1.6 RATING VALUES
1.7 RATED CAPACITY
1.8 RANGE OF HOISTING
1.9 WORKING VELOCITIES
1.10 TEST CERTIFICATE
1.11 MARKING
SECTION 2 DESIGN
2.1 BASIS OF DESIGN
2.2 CLASSIFICATION
2.3 DESIGN FOR STRENGTH
2.3.1 General
2.3.2 Load distribution
2.3.3 Loading combinations
2.4 DEFLECTION
2.5 LATERAL LOADING
2.5.1 General
2.5.2 Horizontal loading
2.5.3 Wind loading
2.5.4 Seismic loading
2.6 STABILITY
2.7 WORKING VELOCITIES
2.8 SAFETY DEVICES
2.9 IMPACT FORCES
2.10 WELDS
2.11 ELECTRICAL EQUIPMENT AND CONTROLS
2.12 HYDRAULIC EQUIPMENT AND CONTROLS
2.13 PNEUMATIC EQUIPMENT AND CONTROLS
2.14 BURSTING SAFETY FACTOR FOR HYDRAULIC AND PNEUMATIC SYSTEMS
2.15 COMPONENTS
2.15.1 Axle and chassis supports
2.15.2 Auxiliary adaptors
2.15.3 Ramps
2.15.4 Runways
2.15.5 Safety locking of arms
2.15.6 Support pads
2.15.7 Wheel stops (wheel supporting hoists)
2.15.8 Anti-creep device
2.15.9 Dropper bars
2.15.10 Fixed platforms, walkways and ladders
2.15.11 Surfaces
2.15.12 Protection of personnel
2.15.13 Controls
2.16 VEHICLE HOISTS - HYDRAULIC
2.16.1 Low-oil control
2.16.2 Air/oil tanks
2.16.3 Air pocket elimination
2.16.4 Hydraulic system
2.16.5 Packing
2.16.6 Speed control
2.16.7 Pressure relief valve setting
2.17 VEHICLE HOISTS - MECHANICAL
2.17.1 Steel wire rope or chain suspension
2.17.2 Screw-suspended vehicle hoists
2.18 VEHICLE HOISTS - HYDROMECHANICAL
2.19 VEHICLE HOISTS - MOVABLE
2.20 HOIST MOTION LIMITS
2.21 MAINTENANCE
2.21.1 Accessibility for maintenance
2.21.2 Lubrication
SECTION 3 INSTALLATION
3.1 GENERAL
3.2 SAFETY COLOUR CODING
3.3 PROTECTION OF HYDRAULIC CYLINDER CASING
3.4 LOCATION OF VEHICLE HOISTS
3.5 VEHICLE CLEARANCE
3.6 FUNCTIONAL TESTS
3.7 DEMONSTRATION
SECTION 4 TYPE TEST REQUIREMENTS
4.1 GENERAL
4.2 UNLADEN TESTS
4.3 TEST LOADS
4.4 LADEN TESTS
4.5 COMPLIANCE WITH TESTS
SECTION 5 OPERATION AND MAINTENANCE INSTRUCTIONS
5.1 GENERAL
5.2 INFORMATION FOR MAINTENANCE TECHNICIANS
5.3 SUITABILITY FOR USE
APPENDIX A - ILLUSTRATIONS OF TYPICAL VEHICLE HOISTS
APPENDIX B - GUIDANCE ON DEFLECTION LIMITS FOR VEHICLE HOISTS IN THE STATIC CONDITION
APPENDIX C - TYPICAL HAZARDS
C1 GENERAL
C2 SAFETY DISTANCES
Previous versions
AS/NZS 1418.9:1996
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.