NZS 3101.1&2:2006 A3
Concrete Structures Standard: Amendment 3
Amendment 3 to NZS 3101.1&2:2006 involves significant revision and the introduction of new material. It has been primarily developed to address recommendations from the Canterbury Earthquakes Royal Commission. In addition, errors in the original published standard and commentary have been corrected and included in this amendment. This amendment is only available incorporated into the standard and orders placed for the amendment will be fulfilled with the standard incorporating amendment 3. This amendment is not available as a separate document.
| Get this standard | Prices exclude GST | |
|---|---|---|
| HardCopy |
$366.00 NZD
|
|
Copyright in the standards listed on this page is either Crown copyright, or is owned by the Crown in right of New Zealand, administered by the New Zealand Standards Executive.
Access to this standard has been sponsored by the Ministry of Business, Innovation and Employment under copyright licence LN001319.
You are permitted to view and print one single copy of the PDF version of this standard free of charge (subject to printing costs) for your own personal use. You are not permitted to reproduce or distribute any part of this standard without prior written permission from Standards New Zealand, on behalf of the New Zealand Standards Executive, unless your actions are covered by Part 3 of the Copyright Act 1994.
For queries about copyright, please contact Standards New Zealand at copyright@standards.govt.nz.
Related Information
HSNOCOP 61 Rotationally Moulded Polyethylene Storage Tanks for Non Flammable Hazardous Substances - Revoked
Ministry: Association of Rotational Moulders Australasia Inc
Section: 1.4
Citation context:NZS 3101:2006 means the standard Concrete Structures Standard Parts one and two.
HSNOCOP 61 Rotationally Moulded Polyethylene Storage Tanks for Non Flammable Hazardous Substances - Revoked
Ministry: Association of Rotational Moulders Australasia Inc
Section: 2.1(i)
Citation context:Where the tank is supported by either a reinforced concrete foundation slab designed in accordance with AS 3600 or NZS 3101 overlying stable foundation material, the tank can be designed on that basis.
Building Code Compliance Document B2
Ministry: Ministry of Business, Innovation, and Employment - Building Systems Performance (BSP)
Section: AS1
Citation context:Refers to 3101.1&2:2006(NZS)A2.
Building Code Compliance Document B2
Ministry: Ministry of Business, Innovation, and Employment - Building Systems Performance (BSP)
Section: AS1
Citation context:Building Code Compliance Document B1
Ministry: Ministry of Business, Innovation, and Employment - Building Systems Performance (BSP)
Section: VM1
Citation context:Refers to 3101.1&2:2006(NZS)A1.
Building Code Compliance Document B1
Ministry: Ministry of Business, Innovation, and Employment - Building Systems Performance (BSP)
Section: VM1
Citation context:Building Code Compliance Document B2
Ministry: Ministry of Business, Innovation, and Employment - Building Systems Performance (BSP)
Section: AS1
Citation context:Refers to 3101.1&2:2006(NZS)A1.
Health and Safety at Work (Hazardous Substances—Above Ground Rotationally-Moulded Polyethylene Stationary Tanks) Safe Work Instrument 2017
Ministry: WorkSafe New Zealand
Section: 7(6)(a)
Citation context:A relevant PCBU must ensure that a tank is designed either—(a) to be supported by a reinforced concrete foundation slab designed in accordance with NZS 3101; or...
Building Code Compliance Document B1
Ministry: Ministry of Business, Innovation, and Employment - Building Systems Performance (BSP)
Section: VM1
Citation context:Refers to 3101.1&2:2006(NZS)A3.
Safe work with precast concrete
Ministry: WorkSafe New Zealand
Section: 6.0
Citation context:Listed as a relevant standard
Safe work with precast concrete
Ministry: WorkSafe New Zealand
Section: 9.4
Citation context:The design of storage and transport frames should meet standards outlined in: NZS 3101: New Zealand concrete structures standard series.... ...Storage racks, frames and supports should be designed for the shape, size and weight of the precast concrete element, and to resist the loads and forces applied to them. Design should consider wind zones and ground conditions, and refer to the latest version of the following standards: New Zealand concrete structures standard (NZS 3101)...
Similar Standards
-
AS/NZS 1314:2003
Prestressing anchorages
-
AS/NZS 2327:2017
Composite structures - Composite steel-concrete construction in buildings
-
AS/NZS 2327:2017
Composite structures - Composite steel-concrete construction in buildings -
AS/NZS 2327:2017 A1
Composite structures - Composite steel-concrete construction in buildings