ISO 7240-18:2017
Fire detection and alarm systems — Part 18: Input/output devices
ISO 7240-18:2017 specifies requirements, test methods and performance criteria for input/output devices connected to a transmission path of a fire detection and alarm system used to receive and/or transmit signals to or from the transmission path, necessary for the operation of the fire detection and fire alarm system and/or fire protection system.
An input/output device can be a physically separate device or its function can be integrated into another device, in which case ISO 7240-18:2017 can be used to assess this function.
ISO 7240-18:2017 is applicable to input/output devices which include signal amplifiers and signal transfer in separate enclosures.
Control and indicating equipment and ancillary control and indicating equipment (e.g. repeater panels and fire brigade panels) are not covered by ISO 7240-18:2017.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$190.00 NZD
|
|
| HardCopy |
$238.00 NZD
|
|
| Networkable PDF |
Price varies
|
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions
3.2 Abbreviated terms
4 Requirements
4.1 Compliance
4.2 Monitoring of detachable devices
4.3 Requirements for software controlled devices
4.3.1 General
4.3.2 Software design
4.3.3 Storage of programs and data
5 Tests
5.1 General
5.1.1 Atmospheric conditions for tests
5.1.2 Mounting arrangements
5.1.3 Operating conditions for tests
5.1.4 Tolerances
5.1.5 Functional test
5.1.6 Provision for tests
5.1.7 Test schedule
5.2 Performance and variation in supply parameters
5.2.1 Object of test
5.2.2 Test procedure
5.2.3 Requirements
5.3 Dry heat (operational)
5.3.1 Object of test
5.3.2 Test procedure
5.3.3 Requirements
5.4 Cold (operational)
5.4.1 Object of test
5.4.2 Test procedure
5.4.3 Requirements
5.5 Damp heat, cyclic (operational)
5.5.1 Object of test
5.5.2 Test procedure
5.5.3 Requirements
5.6 Damp heat, steady-state (endurance)
5.6.1 Object of test
5.6.2 Test procedure
5.6.3 Requirements
5.7 Sulfur dioxide (SO2) corrosion (endurance)
5.7.1 Object of test
5.7.2 Test procedure
5.7.3 Requirements
5.8 Shock (operational)
5.8.1 Object of test
5.8.2 Test procedure
5.8.3 Requirements
5.9 Impact (operational)
5.9.1 Object of test
5.9.2 Test procedure
5.9.3 Requirements
5.10 Vibration, sinusoidal (operational)
5.10.1 Object of test
5.10.2 Test procedure
5.10.3 Requirements
5.11 Vibration, sinusoidal (endurance)
5.11.1 Object of test
5.11.2 Test procedure
5.11.3 Requirements
5.12 Electromagnetic compatibility (EMC) immunity tests
5.12.1 Object of test
5.12.2 Test procedure
5.12.3 Requirements
6 Test report
7 Marking
8 Data
8.1 Hardware documentation
8.2 Software documentation
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 1530.7:1998
Methods for fire tests on building materials, components and structures - Smoke control door and shutter assemblies - Ambient and medium temperature leakage test procedure
-
AS/NZS 1668.1:2015
The use of ventilation and air conditioning in buildings - Part 1: Fire and smoke control in buildings -
AS/NZS 5110:2011
Recessed luminaire barriers -
AS/NZS 5110:2011A1
Recessed luminaire barriers: Amendment 1:2013
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions
3.2 Abbreviated terms
4 Requirements
4.1 Compliance
4.2 Monitoring of detachable devices
4.3 Requirements for software controlled devices
4.3.1 General
4.3.2 Software design
4.3.3 Storage of programs and data
5 Tests
5.1 General
5.1.1 Atmospheric conditions for tests
5.1.2 Mounting arrangements
5.1.3 Operating conditions for tests
5.1.4 Tolerances
5.1.5 Functional test
5.1.6 Provision for tests
5.1.7 Test schedule
5.2 Performance and variation in supply parameters
5.2.1 Object of test
5.2.2 Test procedure
5.2.3 Requirements
5.3 Dry heat (operational)
5.3.1 Object of test
5.3.2 Test procedure
5.3.3 Requirements
5.4 Cold (operational)
5.4.1 Object of test
5.4.2 Test procedure
5.4.3 Requirements
5.5 Damp heat, cyclic (operational)
5.5.1 Object of test
5.5.2 Test procedure
5.5.3 Requirements
5.6 Damp heat, steady-state (endurance)
5.6.1 Object of test
5.6.2 Test procedure
5.6.3 Requirements
5.7 Sulfur dioxide (SO2) corrosion (endurance)
5.7.1 Object of test
5.7.2 Test procedure
5.7.3 Requirements
5.8 Shock (operational)
5.8.1 Object of test
5.8.2 Test procedure
5.8.3 Requirements
5.9 Impact (operational)
5.9.1 Object of test
5.9.2 Test procedure
5.9.3 Requirements
5.10 Vibration, sinusoidal (operational)
5.10.1 Object of test
5.10.2 Test procedure
5.10.3 Requirements
5.11 Vibration, sinusoidal (endurance)
5.11.1 Object of test
5.11.2 Test procedure
5.11.3 Requirements
5.12 Electromagnetic compatibility (EMC) immunity tests
5.12.1 Object of test
5.12.2 Test procedure
5.12.3 Requirements
6 Test report
7 Marking
8 Data
8.1 Hardware documentation
8.2 Software documentation