ISO 25649-3:2017
Floating leisure articles for use on and in the water — Part 3: Additional specific safety requirements and test methods for Class A devices
ISO 25649-3:2017 is applicable for CLASS A classified floating leisure articles for use on and in water according to ISO 25649‑1 regardless whether the buoyancy is achieved by inflation or inherent buoyant material.
ISO 25649-3:2017 is to be applied with ISO 25649‑1 and ISO 25649‑2.
NOTE 1 Typical products forming Class A (see Annex A):
- "Floating Islands" in near round or square shaped forms decorated with palm tree, sun shade, etc. high superstructure;
- large floats/rafts in various forms from round to square;
- large floating tubes, giant tubes (inflatable or inherently buoyant);
- floating arm chairs, seats and sun beds;
- air mattresses for use on the water;
- recreational rafts/floating platforms/pontoons.
NOTE 2 Typical places for application:
- pools;
- protected areas of lakes, ponds;
- protected area sea shore (no offshore winds, no currents).
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$118.26 NZD
|
|
| HardCopy |
$152.17 NZD
|
|
| Networkable PDF |
Price varies
|
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Safety requirements and test methods
4.1 General
4.2 Design, sizing, admissible number of users and maximum load capacity
4.2.1 General
4.2.2 Sizing
4.2.3 A1-products, space per person and admissible number of users
4.2.4 A2-products, space per person and admissible number of users
4.3 In water performance
4.3.1 Amount of buoyancy and stable floating position
4.3.2 Residual buoyancy of devices claiming floating stability (CASES A, B)
4.3.3 Residual buoyancy of floating leisure articles not claiming floating stability (CASES C, D)
4.3.4 Capsizing and escape
4.3.5 Grab handles and safety lines (not applicable to air mattresses)
4.3.6 Re-embarkation from the water in normal use and failure of one air chamber in CASE A1
4.3.7 Extreme high super structure (wind, drift)
4.3.8 Anchorage
4.3.9 Giant rings with bottom, strength of entire device
5 Consumer information
5.1 General
5.2 Consumer information on the packaging (point of sale information)
5.3 Consumer information on the product (information related to safe use)
5.4 Consumer information by instructions for use (separate written information)
5.4.1 General
5.4.2 Safety and product information
5.4.3 Assembly (if applicable)
5.4.4 Maintenance and repair (if applicable)
6 Test report
7 Exclusions
Annex A (informative) Examples of typical products forming Class A
Bibliography
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 18527.2:2022
Eye and face protection for sports use, Part 2: Requirements for eye protectors for squash and eye protectors for racquetball and squash 57
-
AS/NZS 18527.3:2022
Eye and face protection for sports use, Part 3: Requirements and test methods for eyewear intended to be used for surface swimming
-
AS/NZS 2299.1 Supplement 1:2015
Occupational diving operations - Part 1: Standard operational practice - Supplement 1: AS/NZS 2299 diving medical examination forms (Supplement to AS/NZS 2299.1:2015) -
AS/NZS 2299.1:2015
Occupational diving operations - Part 1: Standard operational practice
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Safety requirements and test methods
4.1 General
4.2 Design, sizing, admissible number of users and maximum load capacity
4.2.1 General
4.2.2 Sizing
4.2.3 A1-products, space per person and admissible number of users
4.2.4 A2-products, space per person and admissible number of users
4.3 In water performance
4.3.1 Amount of buoyancy and stable floating position
4.3.2 Residual buoyancy of devices claiming floating stability (CASES A, B)
4.3.3 Residual buoyancy of floating leisure articles not claiming floating stability (CASES C, D)
4.3.4 Capsizing and escape
4.3.5 Grab handles and safety lines (not applicable to air mattresses)
4.3.6 Re-embarkation from the water in normal use and failure of one air chamber in CASE A1
4.3.7 Extreme high super structure (wind, drift)
4.3.8 Anchorage
4.3.9 Giant rings with bottom, strength of entire device
5 Consumer information
5.1 General
5.2 Consumer information on the packaging (point of sale information)
5.3 Consumer information on the product (information related to safe use)
5.4 Consumer information by instructions for use (separate written information)
5.4.1 General
5.4.2 Safety and product information
5.4.3 Assembly (if applicable)
5.4.4 Maintenance and repair (if applicable)
6 Test report
7 Exclusions
Annex A (informative) Examples of typical products forming Class A
Bibliography