ISO 21927-2:2018
Smoke and heat control systems — Part 2: Specifications for natural smoke and heat exhaust ventilators
This document applies to natural smoke and heat exhaust ventilators (NSHEV) operating as part of smoke and heat exhaust systems (SHEVS), placed on the market. This document specifies requirements and gives test methods for natural smoke and heat exhaust ventilators which are intended to be installed in smoke and heat control systems in buildings.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$386.00 NZD
|
|
| HardCopy |
$430.00 NZD
|
|
| Networkable PDF |
Price varies
|
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Requirements
5.1 Nominal activation conditions/sensitivity
5.1.1 Initiation device
5.1.2 Opening mechanism
5.1.3 Inputs and outputs
5.2 Response delay (response time)
5.2.1 Reliability
5.2.2 Opening under (snow/wind) load
5.2.3 Low ambient temperature
5.2.4 Opening under heat
5.3 Operational reliability
5.4 Effectiveness of smoke/hot gas extraction (aerodynamic free area)
5.5 Performance parameters under fire conditions
5.5.1 Resistance to heat
5.5.2 Mechanical stability
5.5.3 Reaction to fire
5.6 Performance under environmental conditions
5.6.1 Opening under load
5.6.2 Low ambient temperature
5.6.3 Stability under wind load
5.6.4 Resistance to wind-induced vibration
5.6.5 Resistance to heat
5.7 Durability
5.7.1 Response delay (response time)
5.7.2 Operational reliability
5.7.3 Performance parameters under fire conditions
6 Testing, assessment and sampling methods
7 Marking, labelling and packaging
Annex A (normative) Classification
Annex B (normative) Effectiveness of smoke/hot gas extraction (aerodynamic free area)
Annex C (normative) Test method for operational reliability and response time
Annex D (normative) Test method for opening under load
Annex E (normative) Test method for low ambient temperature
Annex F (normative) Test method for stability under wind load
Annex G (normative) Test method for resistance to heat
Annex H (normative) Mounting and fixing conditions for the SBI or small flame tests
Annex I (normative) Handling changes affecting declared performances for NSHEV
Annex J (informative) Installation and maintenance information
Bibliography
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 1530.7:1998
Methods for fire tests on building materials, components and structures - Smoke control door and shutter assemblies - Ambient and medium temperature leakage test procedure
-
AS/NZS 1668.1:2015
The use of ventilation and air conditioning in buildings - Part 1: Fire and smoke control in buildings -
AS/NZS 5110:2011
Recessed luminaire barriers -
AS/NZS 5110:2011A1
Recessed luminaire barriers: Amendment 1:2013
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Requirements
5.1 Nominal activation conditions/sensitivity
5.1.1 Initiation device
5.1.2 Opening mechanism
5.1.3 Inputs and outputs
5.2 Response delay (response time)
5.2.1 Reliability
5.2.2 Opening under (snow/wind) load
5.2.3 Low ambient temperature
5.2.4 Opening under heat
5.3 Operational reliability
5.4 Effectiveness of smoke/hot gas extraction (aerodynamic free area)
5.5 Performance parameters under fire conditions
5.5.1 Resistance to heat
5.5.2 Mechanical stability
5.5.3 Reaction to fire
5.6 Performance under environmental conditions
5.6.1 Opening under load
5.6.2 Low ambient temperature
5.6.3 Stability under wind load
5.6.4 Resistance to wind-induced vibration
5.6.5 Resistance to heat
5.7 Durability
5.7.1 Response delay (response time)
5.7.2 Operational reliability
5.7.3 Performance parameters under fire conditions
6 Testing, assessment and sampling methods
7 Marking, labelling and packaging
Annex A (normative) Classification
Annex B (normative) Effectiveness of smoke/hot gas extraction (aerodynamic free area)
Annex C (normative) Test method for operational reliability and response time
Annex D (normative) Test method for opening under load
Annex E (normative) Test method for low ambient temperature
Annex F (normative) Test method for stability under wind load
Annex G (normative) Test method for resistance to heat
Annex H (normative) Mounting and fixing conditions for the SBI or small flame tests
Annex I (normative) Handling changes affecting declared performances for NSHEV
Annex J (informative) Installation and maintenance information
Bibliography