AS/NZS ISO 4706:2024
Gas cylinders – Refillable welded steel cylinders – Test pressure 60 bar and below
The objective of this document is to specify the minimum requirements concerning material selection, design, construction and workmanship, procedure and test at manufacture of refillable welded-steel gas cylinders of water capacities from 0.5 l up to and including 150 l, and drums of water capacities of 150 l to 500 l of a test pressure not greater than 60 bar (1 bar = 0.1 MPa = 105 Pa; 1 MPa = 1 N/mm2), exposed to extreme worldwide temperatures (−50°C to +65°C) used for compressed, liquefied or dissolved gases.
Unless specified in the text, for the purpose of this document, the word 'cylinder' includes 'pressure drums'.
This document is primarily intended to be used for industrial gases other than liquefied petroleum gas (LPG) and is also applicable to LPG.
This document is identical with, and has been reproduced from, ISO 4706:2023 Gas cylinders – Refillable welded steel cylinders – Test pressure 60 bar and below.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$147.60 NZD
|
|
| HardCopy |
$164.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS ISO 4706:2025 Gas cylinders - Refillable welded steel cylinders - Test pressure 60 bar and below
Preface
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and symbols
3.1 Terms and definitions
3.2 Symbols
4 Inspection and testing
5 Materials
5.1 General
5.2 Chemical composition
6 Design
6.1 General requirements
6.2 Valve protection
6.3 Design of openings
7 Calculation of minimum wall thickness (sidewall and ends)
7.1 Sidewall thickness
7.2 Design of ends concave to pressure
8 Construction and workmanship
8.1 Welding qualification
8.1.1 General
8.1.2 Base materials (pressure and non-pressure)
8.1.3 Positions of welds
8.1.4 Welding materials
8.1.5 Retesting
8.1.6 Period of effectiveness
8.1.7 Changes to welding process requiring recertification
8.1.8 Welder qualification tests
8.1.9 Results of welder qualification
8.2 Plates and pressed parts
8.3 Welded joints
8.4 Tolerances
8.4.1 Out of roundness
8.4.2 Straightness
8.4.3 Verticality
8.5 Non-pressure-containing attachments
8.6 Valve protection
8.7 Closure of openings
8.8 Heat treatment
9 Testing
9.1 Mechanical testing
9.1.1 General requirements
9.1.2 Types of test and evaluation of test results
9.2 Burst test under hydraulic pressure
9.2.1 Test conditions
9.2.2 Interpretation of test
9.2.3 Volumetric expansion
9.3 Pressure test
9.4 Radiographic and macro examination
9.4.1 Radiographic examination
9.4.2 Macro examination
9.4.3 Examination of flange welding
9.4.4 Examination of welding of non-pressure containing attachments
9.4.5 Unacceptable imperfections at radiographic or macro examination
9.5 Visual examination of the surface of the weld
10 Acceptance criteria
11 Type approval
12 Batch tests
12.1 Inspection lots
12.2 Rate of sampling
12.3 Quantity ≤ 3 000 cylinders water capacity less than or equal to 35 l
12.4 Quantity over 3 001 cylinders water capacity greater than 35 l
12.5 Failure to meet batch test requirements
13 Test/examinations for all pressure cylinders
14 Markings
15 Certificate
Annex A (informative) New design type approval certificate
Annex B (informative) Acceptance certificate
Bibliography
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
12/3025963 DC
BS ISO 15399. Gaseous hydrogen. Cylinders and tubes for stationary storage
-
AS/NZS ISO 11114.1:2025
Gas cylinders – Compatibility of cylinder and valve materials with gas contents – Part 1: Metallic materials
-
AS/NZS ISO 11114.4:2025
Transportable gas cylinders – Compatibility of cylinder and valve materials with gas contents – Part 4: Test methods for selecting steels resistant to hydrogen embrittlement
-
AS/NZS ISO 9809.1:2025
Gas cylinders – Design, construction and testing of refillable seamless steel gas cylinders and tubes – Part 1: Quenched and tempered steel cylinders and tubes with tensile strength less than 1 100 MPa
AS/NZS ISO 4706:2025 Gas cylinders - Refillable welded steel cylinders - Test pressure 60 bar and below
Preface
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and symbols
3.1 Terms and definitions
3.2 Symbols
4 Inspection and testing
5 Materials
5.1 General
5.2 Chemical composition
6 Design
6.1 General requirements
6.2 Valve protection
6.3 Design of openings
7 Calculation of minimum wall thickness (sidewall and ends)
7.1 Sidewall thickness
7.2 Design of ends concave to pressure
8 Construction and workmanship
8.1 Welding qualification
8.1.1 General
8.1.2 Base materials (pressure and non-pressure)
8.1.3 Positions of welds
8.1.4 Welding materials
8.1.5 Retesting
8.1.6 Period of effectiveness
8.1.7 Changes to welding process requiring recertification
8.1.8 Welder qualification tests
8.1.9 Results of welder qualification
8.2 Plates and pressed parts
8.3 Welded joints
8.4 Tolerances
8.4.1 Out of roundness
8.4.2 Straightness
8.4.3 Verticality
8.5 Non-pressure-containing attachments
8.6 Valve protection
8.7 Closure of openings
8.8 Heat treatment
9 Testing
9.1 Mechanical testing
9.1.1 General requirements
9.1.2 Types of test and evaluation of test results
9.2 Burst test under hydraulic pressure
9.2.1 Test conditions
9.2.2 Interpretation of test
9.2.3 Volumetric expansion
9.3 Pressure test
9.4 Radiographic and macro examination
9.4.1 Radiographic examination
9.4.2 Macro examination
9.4.3 Examination of flange welding
9.4.4 Examination of welding of non-pressure containing attachments
9.4.5 Unacceptable imperfections at radiographic or macro examination
9.5 Visual examination of the surface of the weld
10 Acceptance criteria
11 Type approval
12 Batch tests
12.1 Inspection lots
12.2 Rate of sampling
12.3 Quantity ≤ 3 000 cylinders water capacity less than or equal to 35 l
12.4 Quantity over 3 001 cylinders water capacity greater than 35 l
12.5 Failure to meet batch test requirements
13 Test/examinations for all pressure cylinders
14 Markings
15 Certificate
Annex A (informative) New design type approval certificate
Annex B (informative) Acceptance certificate
Bibliography
AS/NZS ISO 4706:2024
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.