AS/NZS IEC 61111:2020
Live working -Electrical insulating matting
Objective of this Standard is to specify requirements for electrical insulating matting made of elastomer for use as a floor covering for the electrical protection of workers on electrical installations. This Standard identical with, and has been reproduced from, IEC 61111:2009 Live working - Electrical insulating matting.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$147.60 NZD
|
|
| HardCopy |
$164.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS IEC 61111:2020 Electrical insulating mats
CONTENTS
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
4.1 General
4.2 Classification
4.3 Physical requirements
4.4 Mechanical, climatic and environmental requirements
4.5 Dielectric requirements
4.6 Marking
4.7 Packaging
4.8 Instructions for use
5 Tests
5.1 General
5.2 Visual inspection and measurements
5.3 Marking
5.4 Packaging and instructions for use
5.5 Mechanical tests
5.6 Dielectric tests
5.7 Ageing tests
5.8 Thermal tests
5.9 Acid resistance
5.10 Oil resistance
6 Conformity assessment of electrical insulating matting having completed the production phase
7 Modifications
Annex A (informative) Guidelines for the selection of the class of electrical insulating matting in relation to nominal voltage of a system
Annex B (informative) In-service care and testing
Annex C (normative) Suitable for live working; double triangle (IEC 60417–5216 (2002-10))
Annex D (normative) General type test procedure
Annex E (normative) Oil for tests for oil resistance
Annex F (normative) Classification of defects and tests to be allocated
Bibliography
Figures
Figure 1 – Test plates and needle for resistance to mechanical puncture
Figure 2 – Test set-up for voltage proof test of electrical insulating matting with standard type of electrodes
Figure 3 – Test set-up for voltage proof test of electrical insulating matting with alternative type of electrodes
Figure 4 – Test set-up for voltage withstand test
Figure 5 – Test set-up for low and extremely low temperature folding tests
Tables
Table 1 – Common lengths and widths for electrical insulating matting
Table 2 – Maximum thickness for electrical insulating matting
Table 3 – Maximum electrode clearance for proof tests
Table 4 – Test voltages
Table A.1 – Designation maximum use voltage
Table D.1 – List and chronological order of type tests
Table E.1 – Characteristics of oil no. 1
Table F.1 – Classification of defects and associated requirements and tests
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 1020:2023
The control of static electricity in non-hazardous area
-
AS/NZS 2500:2020
Safe use of medical electrical equipment in health care -
AS/NZS 2978:1995
Insulating mats for electrical purposes
-
AS/NZS 3000:2018
Electrical installations - Known as the Australian/New Zealand Wiring Rules
AS/NZS IEC 61111:2020 Electrical insulating mats
CONTENTS
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
4.1 General
4.2 Classification
4.3 Physical requirements
4.4 Mechanical, climatic and environmental requirements
4.5 Dielectric requirements
4.6 Marking
4.7 Packaging
4.8 Instructions for use
5 Tests
5.1 General
5.2 Visual inspection and measurements
5.3 Marking
5.4 Packaging and instructions for use
5.5 Mechanical tests
5.6 Dielectric tests
5.7 Ageing tests
5.8 Thermal tests
5.9 Acid resistance
5.10 Oil resistance
6 Conformity assessment of electrical insulating matting having completed the production phase
7 Modifications
Annex A (informative) Guidelines for the selection of the class of electrical insulating matting in relation to nominal voltage of a system
Annex B (informative) In-service care and testing
Annex C (normative) Suitable for live working; double triangle (IEC 60417–5216 (2002-10))
Annex D (normative) General type test procedure
Annex E (normative) Oil for tests for oil resistance
Annex F (normative) Classification of defects and tests to be allocated
Bibliography
Figures
Figure 1 – Test plates and needle for resistance to mechanical puncture
Figure 2 – Test set-up for voltage proof test of electrical insulating matting with standard type of electrodes
Figure 3 – Test set-up for voltage proof test of electrical insulating matting with alternative type of electrodes
Figure 4 – Test set-up for voltage withstand test
Figure 5 – Test set-up for low and extremely low temperature folding tests
Tables
Table 1 – Common lengths and widths for electrical insulating matting
Table 2 – Maximum thickness for electrical insulating matting
Table 3 – Maximum electrode clearance for proof tests
Table 4 – Test voltages
Table A.1 – Designation maximum use voltage
Table D.1 – List and chronological order of type tests
Table E.1 – Characteristics of oil no. 1
Table F.1 – Classification of defects and associated requirements and tests
AS/NZS IEC 61111:2020
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.