AS/NZS 62560:2017
Self-ballasted LED-lamps for general lighting services by voltage greater than 50 V - Safety specifications
Specifies electrical safety requirements for self-ballasted LED-lamps, intended for general lighting services, with a rated voltage of greater than 50 V. Adopted with national modifications from IEC 62560, Ed. 1.1:2015.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$132.30 NZD
|
|
| HardCopy |
$147.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 62560:2017 Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications (IEC 62560:2011+AMD1:2015 CSV, MOD)
CONTENTS
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements and general test requirements
5 Marking
6 Interchangeability
6.1 Cap interchangeability
6.2 Bending moment and mass imparted by the lamp at the lamp holder
7 Protection against accidental contact with live parts
8 Insulation resistance and electric strength after humidity treatment
8.1 General
8.2 Insulation resistance
8.3 Electric strength
9 Mechanical strength
9.1 Requirements
9.2 Tests
9.3 Compliance criteria
9.4 Axial strength of Edison caps
10 Cap temperature rise
11 Resistance to heat
12 Resistance to flame and ignition
13 Fault conditions
13.1 General requirements
13.2 Test conditions
13.3 Compliance
14 Creepage distances and clearances
15 Abnormal operation
16 Test conditions for dimmable lamps
17 Photobiological safety
17.1 UV radiation
17.2 Blue light hazard
18 Ingress protection
18.1 Requirements
18.2 Tests
19 Information for luminaire design
Annex A (informative) Information for luminaire design
Bibliography
Figures
Figure 1 – Dimming not allowed
Figure 2 – Standard test finger (according to IEC€60529)
Figure 3 – Holder for torque test on lamps with screw caps (from IEC 60432-1, Figure C.2)
Figure 4 – Holder for torque test on lamps with bayonet caps (from IEC 60432-1, Figure C.1)
Figure 5 – Ball-pressure test apparatus
Figure 6 – Lamp not suitable for use under dust and moisture
Figure 7 – Test equipment for applying an axial force
Figure 8 – Test circuit for testing a non-dimmable lamp at a dimmer or electronic switch
Tables
Table 1 – Interchangeability gauges and lamp cap dimensions
Table 2 – Bending moments and masses
Table 3 – Torque test values for unused lamps
Table 4 – Values for axial force
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
References
Incandescent lamps - Safety specifications - Tungsten filament lamps for domestic and similar general lighting purposes
Fire hazard testing - Glowing/hot wire based test methods - Glow-wire flammability test method for end products
Fire hazard testing - Glowing/hot wire based test methods - Glow-wire flammability test method for materials
Fire hazard testing - Glowing/hot wire based test methods - Glow-wire ignitability test method for materials
Related Information
Similar Standards
-
AS/NZS 4782.1:2020
Double-capped fluorescent lamps - Performance specifications -
AS/NZS 4782.1:2020 A1
Amendment 1 to AS/NZS 4782.1:2020 - Double-capped fluorescent lamps - Performance specifications -
AS/NZS 4782.1:2020 A2
Amendment 2 to AS/NZS 4782.1:2020 - Double-capped fluorescent lamps - Performance specifications -
AS/NZS 4782.1:2020 A3
Amendment 3 to AS/NZS 4782.1:2020 - Double-capped fluorescent lamps - Performance specifications
AS/NZS 62560:2017 Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications (IEC 62560:2011+AMD1:2015 CSV, MOD)
CONTENTS
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements and general test requirements
5 Marking
6 Interchangeability
6.1 Cap interchangeability
6.2 Bending moment and mass imparted by the lamp at the lamp holder
7 Protection against accidental contact with live parts
8 Insulation resistance and electric strength after humidity treatment
8.1 General
8.2 Insulation resistance
8.3 Electric strength
9 Mechanical strength
9.1 Requirements
9.2 Tests
9.3 Compliance criteria
9.4 Axial strength of Edison caps
10 Cap temperature rise
11 Resistance to heat
12 Resistance to flame and ignition
13 Fault conditions
13.1 General requirements
13.2 Test conditions
13.3 Compliance
14 Creepage distances and clearances
15 Abnormal operation
16 Test conditions for dimmable lamps
17 Photobiological safety
17.1 UV radiation
17.2 Blue light hazard
18 Ingress protection
18.1 Requirements
18.2 Tests
19 Information for luminaire design
Annex A (informative) Information for luminaire design
Bibliography
Figures
Figure 1 – Dimming not allowed
Figure 2 – Standard test finger (according to IEC€60529)
Figure 3 – Holder for torque test on lamps with screw caps (from IEC 60432-1, Figure C.2)
Figure 4 – Holder for torque test on lamps with bayonet caps (from IEC 60432-1, Figure C.1)
Figure 5 – Ball-pressure test apparatus
Figure 6 – Lamp not suitable for use under dust and moisture
Figure 7 – Test equipment for applying an axial force
Figure 8 – Test circuit for testing a non-dimmable lamp at a dimmer or electronic switch
Tables
Table 1 – Interchangeability gauges and lamp cap dimensions
Table 2 – Bending moments and masses
Table 3 – Torque test values for unused lamps
Table 4 – Values for axial force
Previous versions
AS/NZS 62560:2017
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.