AS/NZS 62087.2.2:2011
Power consumption of audio, video and related equipment - Part 2.2: Minimum energy performance standards (MEPS) and energy rating label requirements for television sets
Provides designers, manufacturers, importers, test laboratories, regulators and users of mains-operated television sets with minimum energy performance standards (MEPS) and energy rating label requirements for these devices.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$171.90 NZD
|
|
| HardCopy |
$191.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 EXCLUSIONS
1.3 APPLICATION
1.4 NORMATIVE REFERENCES
1.5 DEFINITIONS
1.5.1 Recommended home viewing picture mode
1.5.2 Registration
1.5.3 Regulators
1.5.4 Store mode
1.5.5 Total energy consumption (TEC)
1.5.6 Trans-Tasman Mutual Recognition Agreement (TTMRA)
1.6 FAMILY OF MODELS
1.7 MEASURED QUANTITIES
1.8 ROUNDING
SECTION 2 PICTURE MODE REQUIREMENTS
2.1 RECOMMENDED HOME VIEWING PICTURE MODE
2.2 USER SELECTION OF THE RECOMMENDED HOME VIEWING PICTURE MODE
2.3 IMPLEMENTATION OF PICTURE SET-UP OR INSTALLATION MENUS
2.4 PICTURE MODE LUMINANCE
2.4.1 Picture mode luminance level
2.4.2 Luminance measurement method
2.5 ON SCREEN WARNING WHEN SET IN 'STORE' MODE
SECTION 3 DETERMINATION OF ENERGY PERFORMANCE FOR TELEVISION SETS
3.1 DETERMINATION OF THE PICTURE MODE FOR POWER MEASUREMENT
3.2 MEASURING CONDITIONS
3.3 PROJECTED ANNUAL ENERGY CONSUMPTION (PAEC)
3.3.1 General
3.3.2 Method 1
3.3.3 Method 2
3.4 PASSIVE AND ACTIVE STANDBY MODES
3.5 COMPARATIVE ENERGY CONSUMPTION (CEC)
3.6 ENERGY EFFICIENCY LABEL VALIDITY
SECTION 4 DETERMINATION OF STAR RATING INDEX AND REQUIREMENTS FOR ENERGY LABELS FOR TELEVISION SETS
4.1 STAR RATING INDEX (SRI)
4.2 LABEL TYPE AND SIZE
4.3 LABEL POSITIONING AND ATTACHMENT
SECTION 5 MINIMUM ENERGY PERFORMANCE STANDARDS REQUIREMENTS
5.1 GENERAL
5.2 DETERMINATION OF THE MEPS LIMIT FOR TIER 1
5.3 DETERMINATION OF THE MEPS LIMIT FOR TIER 2
SECTION 6 APPLICATION FOR REGISTRATION AND TEST REPORT FORMATS
6.1 APPLICATION FOR REGISTRATION
6.2 REGISTRATION IN AUSTRALIA
6.2.1 Prescribed form
6.2.2 Test report and format
6.2.3 Availability of records
6.2.4 Registration
6.3 REGISTRATION IN NEW ZEALAND
6.3.1 Prescribed form
6.3.2 Test report
6.3.3 Records availability
6.4 DATE OF MANUFACTURE INFORMATION
6.5 CHECK TESTING
6.6 TRANSITION ENERGY LABEL
APPENDIX A - FORMAT OF APPLICATION FOR REGISTRATION OF TELEVISION SETS FOR MEPS AND LABELLING REQUIREMENTS
A1 SCOPE
A2 GUIDANCE ON THE USE OF THIS APPLICATION FORM
A3 APPLICATION FORM
APPENDIX B - LABEL SPECIFICATION FOR TELEVISION SETS
B1 LABEL TYPE AND SIZE
B2 LABEL COLOUR AND FONT
B2.1 Colours
B2.2 Font
B3 LABEL VARIANTS
APPENDIX C - TEST REPORT
APPENDIX D - OVERVIEW OF NEW ZEALAND LEGAL REQUIREMENTS
APPENDIX E - DERIVATION OF THE STAR RATING INDEX AND BACKGROUND ON TV MEPS AND LABELLING
E1 BACKGROUND ON THE ESTABLISHMENT OF AUSTRALIA'S TELEVISION MEPS AND LABELLING SCHEME
E1.1 General
E1.2 Derivation of the MEPS and Star Rating Index for televisions
E2 DETERMINING THE MEPS LEVEL CONSTANTS FOR TELEVISIONS
E3 DETERMINING THE SRI LEVEL CONSTANTS FOR TELEVISIONS
Amendments
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
References
Performance of external power supplies - Test method and energy performance mark
Performance of external power supplies - Minimum energy performance standard (MEPS) requirements
Power consumption of audio, video and related equipment - Methods of measurement
Household electrical appliances - Measurement of standby power
Related Information
Energy Efficiency (Energy Using Products) Regulations 2002
Ministry: Ministry of Business Innovation and Employment - Energy Resources and Markets (ERM)
Section: Schedule 2
Citation context:Refers to 62087.2.2:2011(AS/NZS)A1. This Standard was re-incorporated by the Amendment Regulations 2013 to give effect to Amendments 1 and 2 (see the Explanatory Note to the 2013 Amendment Regs).
Energy Efficiency (Energy Using Products) Regulations 2002
Ministry: Ministry of Business Innovation and Employment - Energy Resources and Markets (ERM)
Section: Schedule 2
Citation context:Refers to 62087.2.2:2011(AS/NZS)A2. This Standard was re-incorporated by the Amendment Regulations 2013 to give effect to Amendments 1 and 2 (see the Explanatory Note to the 2013 Amendment Regs).
Energy Efficiency (Energy Using Products) Regulations 2002
Ministry: Ministry of Business Innovation and Employment - Energy Resources and Markets (ERM)
Section: Schedule 2
Citation context:Listed as a mandatory energy performance labelling Standard for television sets
Energy Efficiency (Energy Using Products) Regulations 2002
Ministry: Ministry of Business Innovation and Employment - Energy Resources and Markets (ERM)
Section: Schedule 1
Citation context:Television sets MEPSStandard AS/NZS 62087.2.2:2011: Power consumption of audio, video and related equipment—Minimum energy level performance standards (MEPS) and energy rating label requirements for television sets, except that clause 5.1 of that standard applies as if, for all the words in that clause, there were substituted the words “From 1 October 2012 a television shall meet the Tier 1 requirements in Clause 5.2."
Energy Efficiency (Energy Using Products) Regulations 2002
Ministry: Ministry of Business Innovation and Employment - Energy Resources and Markets (ERM) - EECA
Section: Schedule 2
Citation context:Refers to 62087.2.2:2011(AS/NZS)A1. This Standard was re-incorporated by the Amendment Regulations 2013 to give effect to Amendments 1 and 2 (see the Explanatory Note to the 2013 Amendment Regs).
Energy Efficiency (Energy Using Products) Regulations 2002
Ministry: Ministry of Business Innovation and Employment - Energy Resources and Markets (ERM) - EECA
Section: Schedule 2
Citation context:Refers to 62087.2.2:2011(AS/NZS)A2. This Standard was re-incorporated by the Amendment Regulations 2013 to give effect to Amendments 1 and 2 (see the Explanatory Note to the 2013 Amendment Regs).
Energy Efficiency (Energy Using Products) Regulations 2002
Ministry: Ministry of Business Innovation and Employment - Energy Resources and Markets (ERM) - EECA
Section: Schedule 2
Citation context:Listed as a mandatory energy performance labelling Standard for television sets
Energy Efficiency (Energy Using Products) Regulations 2002
Ministry: Ministry of Business Innovation and Employment - Energy Resources and Markets (ERM) - EECA
Section: Schedule 1
Citation context:Television sets MEPS Standard AS/NZS 62087.2.2:2011: Power consumption of audio, video and related equipment—Minimum energy level performance standards (MEPS) and energy rating label requirements for television sets, except that clause 5.1 of that standard applies as if, for all the words in that clause, there were substituted the words “From 1 October 2012 a television shall meet the Tier 1 requirements in Clause 5.2."
Similar Standards
-
AS/NZS 62087.2.1:2008
Power consumption of audio, video and related equipment - Minimum energy performance standards (MEPS) requirements for digital television set-top boxes
-
AS/NZS 62087.2.1:2008 A1
Power consumption of audio, video and related equipment - Minimum energy performance standards (MEPS) requirements for digital television set-top boxes: Amendment 1
-
AS/NZS 62087.2.1:2008 A2
Power consumption of audio, video and related equipment - Minimum energy performance standards (MEPS) requirements for digital television set-top boxes: Amendment 2
-
AS/NZS 62087.2.2:2011 A1
Power consumption of audio, video and related equipment - Part 2.2: Minimum energy performance standards (MEPS) and energy rating label requirements for television sets: Amendment 1:2012
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 EXCLUSIONS
1.3 APPLICATION
1.4 NORMATIVE REFERENCES
1.5 DEFINITIONS
1.5.1 Recommended home viewing picture mode
1.5.2 Registration
1.5.3 Regulators
1.5.4 Store mode
1.5.5 Total energy consumption (TEC)
1.5.6 Trans-Tasman Mutual Recognition Agreement (TTMRA)
1.6 FAMILY OF MODELS
1.7 MEASURED QUANTITIES
1.8 ROUNDING
SECTION 2 PICTURE MODE REQUIREMENTS
2.1 RECOMMENDED HOME VIEWING PICTURE MODE
2.2 USER SELECTION OF THE RECOMMENDED HOME VIEWING PICTURE MODE
2.3 IMPLEMENTATION OF PICTURE SET-UP OR INSTALLATION MENUS
2.4 PICTURE MODE LUMINANCE
2.4.1 Picture mode luminance level
2.4.2 Luminance measurement method
2.5 ON SCREEN WARNING WHEN SET IN 'STORE' MODE
SECTION 3 DETERMINATION OF ENERGY PERFORMANCE FOR TELEVISION SETS
3.1 DETERMINATION OF THE PICTURE MODE FOR POWER MEASUREMENT
3.2 MEASURING CONDITIONS
3.3 PROJECTED ANNUAL ENERGY CONSUMPTION (PAEC)
3.3.1 General
3.3.2 Method 1
3.3.3 Method 2
3.4 PASSIVE AND ACTIVE STANDBY MODES
3.5 COMPARATIVE ENERGY CONSUMPTION (CEC)
3.6 ENERGY EFFICIENCY LABEL VALIDITY
SECTION 4 DETERMINATION OF STAR RATING INDEX AND REQUIREMENTS FOR ENERGY LABELS FOR TELEVISION SETS
4.1 STAR RATING INDEX (SRI)
4.2 LABEL TYPE AND SIZE
4.3 LABEL POSITIONING AND ATTACHMENT
SECTION 5 MINIMUM ENERGY PERFORMANCE STANDARDS REQUIREMENTS
5.1 GENERAL
5.2 DETERMINATION OF THE MEPS LIMIT FOR TIER 1
5.3 DETERMINATION OF THE MEPS LIMIT FOR TIER 2
SECTION 6 APPLICATION FOR REGISTRATION AND TEST REPORT FORMATS
6.1 APPLICATION FOR REGISTRATION
6.2 REGISTRATION IN AUSTRALIA
6.2.1 Prescribed form
6.2.2 Test report and format
6.2.3 Availability of records
6.2.4 Registration
6.3 REGISTRATION IN NEW ZEALAND
6.3.1 Prescribed form
6.3.2 Test report
6.3.3 Records availability
6.4 DATE OF MANUFACTURE INFORMATION
6.5 CHECK TESTING
6.6 TRANSITION ENERGY LABEL
APPENDIX A - FORMAT OF APPLICATION FOR REGISTRATION OF TELEVISION SETS FOR MEPS AND LABELLING REQUIREMENTS
A1 SCOPE
A2 GUIDANCE ON THE USE OF THIS APPLICATION FORM
A3 APPLICATION FORM
APPENDIX B - LABEL SPECIFICATION FOR TELEVISION SETS
B1 LABEL TYPE AND SIZE
B2 LABEL COLOUR AND FONT
B2.1 Colours
B2.2 Font
B3 LABEL VARIANTS
APPENDIX C - TEST REPORT
APPENDIX D - OVERVIEW OF NEW ZEALAND LEGAL REQUIREMENTS
APPENDIX E - DERIVATION OF THE STAR RATING INDEX AND BACKGROUND ON TV MEPS AND LABELLING
E1 BACKGROUND ON THE ESTABLISHMENT OF AUSTRALIA'S TELEVISION MEPS AND LABELLING SCHEME
E1.1 General
E1.2 Derivation of the MEPS and Star Rating Index for televisions
E2 DETERMINING THE MEPS LEVEL CONSTANTS FOR TELEVISIONS
E3 DETERMINING THE SRI LEVEL CONSTANTS FOR TELEVISIONS
Amendments
Previous versions
AS/NZS 62087.2.2:2011
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.