AS/NZS 61347.2.1:2019
Lamp controlgear - Part 2.1: Particular requirements for starting devices (other than glow starters)
Specifies particular safety requirements for starting devices other than glow starters and ignitors for fluorescent and other discharge lamps, for use on a.c. supplies up to 1 000 V at 50 Hz or 60 Hz which produce starting pulses not greater than 100 kV and which are used in combination with lamps and ballasts covered in AS/NZS 4782.1:2004, IEC 60188, IEC 60192, IEC 60662, AS/NZS 60901:2003, IEC 61167, IEC 61195, IEC 61199, AS/NZS 61347.2.8 and AS/NZS 61347.2.9. Adopted with national modifications, and has been reproduced from, IEC 61347-2-1:2000 with AMD1:2005 and AMD2:2013 CSV (ED 1.2).
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$117.00 NZD
|
|
| HardCopy |
$130.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 61347.2.1:2019 Lamp controlgear Particular requirements for starting devices (other than glow starters) (IEC 61347-2-1:2013 (ED 1.2) MOD)
CONTENTS
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Definitions
4 General requirements
5 General notes on tests
5.1 Starting devices for use with lamps having different electrical characteristics
5.2 Number of specimens
6 Classification
7 Marking
7.1 Mandatory markings
7.2 Information to be provided, if applicable
8 Protection against accidental contact with live parts
9 Terminals
10 Provisions for earthing
11 Moisture resistance and insulation
12 Electric strength
13 Thermal endurance test for windings
14 Fault conditions
15 Heating of built-in and independent starting devices
15.1 General
15.2 Normal operation
15.3 Abnormal operation
16 Pulse voltage of ignitors
17 Mechanical strength
18 Construction
19 Creepage distances and clearances
20 Screws, current-carrying parts and connections
21 Resistance to heat, fire and tracking
22 Resistance to corrosion
Annexes
Bibliography
Figures
Figure 1 – Starting voltage measurement for ignitors
Figure I.1 – Tumbling barrel
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 4782.2:2004
Double-capped fluorescent lamps - Performance specifications - Minimum Energy Performance Standard (MEPS)
-
AS/NZS 4782.2:2004 A1
Double-capped fluorescent lamps - Performance specifications - Minimum Energy Performance Standard (MEPS): Amendment 1
-
AS/NZS 4782.2:2004 A2
Double-capped fluorescent lamps - Performance specifications - Minimum Energy Performance Standard (MEPS): Amendment 2
-
AS/NZS 5341:2021
LED lamps – Test methods – Energy and functional performance
AS/NZS 61347.2.1:2019 Lamp controlgear Particular requirements for starting devices (other than glow starters) (IEC 61347-2-1:2013 (ED 1.2) MOD)
CONTENTS
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Definitions
4 General requirements
5 General notes on tests
5.1 Starting devices for use with lamps having different electrical characteristics
5.2 Number of specimens
6 Classification
7 Marking
7.1 Mandatory markings
7.2 Information to be provided, if applicable
8 Protection against accidental contact with live parts
9 Terminals
10 Provisions for earthing
11 Moisture resistance and insulation
12 Electric strength
13 Thermal endurance test for windings
14 Fault conditions
15 Heating of built-in and independent starting devices
15.1 General
15.2 Normal operation
15.3 Abnormal operation
16 Pulse voltage of ignitors
17 Mechanical strength
18 Construction
19 Creepage distances and clearances
20 Screws, current-carrying parts and connections
21 Resistance to heat, fire and tracking
22 Resistance to corrosion
Annexes
Bibliography
Figures
Figure 1 – Starting voltage measurement for ignitors
Figure I.1 – Tumbling barrel
Previous versions
AS/NZS 61347.2.1:2019
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.