AS/NZS 61000.6.3:2021
Electromagnetic compatibility (EMC), Part 6-3: Generic standards - Emission standard for equipment in residential environments
AS/NZS 61000.6.3:2021 adopts IEC 61000-6-3:2020 with modifications for Australia and New Zealand, which specifies emission requirements for electrical and electronic equipment intended for use at residential locations. This document also applies to electrical and electronic equipment intended for use at other locations that do not fall within the scope of AS/NZS 61000.6.8 or AS 61000.6.4.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$94.50 NZD
|
|
| HardCopy |
$105.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 61000.6.3:2021 Electromagnetic compatibility (EMC) Generic standards -- Emission standard for equipment in residential environments (IEC 61000-6-3:2020 (ED 3.0) MOD)
English
CONTENTS
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions
3.2 Abbreviated terms
4 Classification of equipment
5 Measurements and conditions during testing
6 Documentation for the user
7 Applicability
8 Requirements
9 Measurement uncertainty
10 Compliance with this document
11 Emission test details
Annex€A (informative)Classification of equipment and mapping to the immunity standards
Annex€B (normative)Testing of DC powered systems
Annex€C (informative)Rationale for alternative test levels at the DC power port
C.1 General
C.2 Necessity of alternative test methods in generic standards
C.3 Limit justification in table clause 5.2
C.3.1 Proportional relation approach
C.3.2 Current-to-voltage conversion approach
C.3.3 Setting the final limit
Bibliography
Figures
Figure€1 – Example of ports
Figure€C.1 – Equivalent circuit of test set up for measurement of disturbance voltages
Tables
Table 1 – Test arrangements of EUT
Table 2 – Required highest frequency for radiated measurement
Table€3 – Requirements for radiated emissions, enclosure port
Table€4 – Requirements for conducted emissions, low voltage AC mains port
Table€5 – Requirements for conducted emissions, DC power port
Table€6 – Requirements for conducted emissions, other wired ports
Table A.1 – Examples of emission and immunity requirements against product type and intended use
Table B.1 – Conducted emission requirements of DC powered equipment
Table B.2 – Conditional requirements for the start frequency of testat DC power ports for tests defined in table clause B1.4 to B1.7
Table€C.1 – DC power port, terminal disturbance voltage limits for class€B GCPCs, measured on a test site,proportion relation approach
Table€C.2 – DC power port, terminal disturbance voltage limits for class€B GCPCs, measured on a test site, current-to-voltage conversion approach
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 61000.2.4:2009
Electromagnetic compatibility (EMC) - Environment - Compatibility levels in industrial plants for low frequency conducted disturbances
-
AS/NZS 61000.3.4:2007
Electromagnetic compatibility (EMC) - Limits - Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 75 A
-
AS/NZS 61000.4.20:2023
Electromagnetic compatibility (EMC), Part 4.20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides (IEC 61000-4-20:2022 (ED. 3.0) MOD)
-
AS/NZS 61000.4.7:2012
Electromagnetic compatibility (EMC) - Part 4.7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
AS/NZS 61000.6.3:2021 Electromagnetic compatibility (EMC) Generic standards -- Emission standard for equipment in residential environments (IEC 61000-6-3:2020 (ED 3.0) MOD)
English
CONTENTS
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions
3.2 Abbreviated terms
4 Classification of equipment
5 Measurements and conditions during testing
6 Documentation for the user
7 Applicability
8 Requirements
9 Measurement uncertainty
10 Compliance with this document
11 Emission test details
Annex€A (informative)Classification of equipment and mapping to the immunity standards
Annex€B (normative)Testing of DC powered systems
Annex€C (informative)Rationale for alternative test levels at the DC power port
C.1 General
C.2 Necessity of alternative test methods in generic standards
C.3 Limit justification in table clause 5.2
C.3.1 Proportional relation approach
C.3.2 Current-to-voltage conversion approach
C.3.3 Setting the final limit
Bibliography
Figures
Figure€1 – Example of ports
Figure€C.1 – Equivalent circuit of test set up for measurement of disturbance voltages
Tables
Table 1 – Test arrangements of EUT
Table 2 – Required highest frequency for radiated measurement
Table€3 – Requirements for radiated emissions, enclosure port
Table€4 – Requirements for conducted emissions, low voltage AC mains port
Table€5 – Requirements for conducted emissions, DC power port
Table€6 – Requirements for conducted emissions, other wired ports
Table A.1 – Examples of emission and immunity requirements against product type and intended use
Table B.1 – Conducted emission requirements of DC powered equipment
Table B.2 – Conditional requirements for the start frequency of testat DC power ports for tests defined in table clause B1.4 to B1.7
Table€C.1 – DC power port, terminal disturbance voltage limits for class€B GCPCs, measured on a test site,proportion relation approach
Table€C.2 – DC power port, terminal disturbance voltage limits for class€B GCPCs, measured on a test site, current-to-voltage conversion approach
AS/NZS 61000.6.3:2021
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.