AS/NZS 60695.11.4:2004
Fire hazard testing - Test flames - 50 W flames - Apparatus and confirmational test methods
Provides detailed requirements for the production of a 50 W nominal, pre-mixed type test flame, with an overall height of approximately 20 mm. Three methods, A,B and C, are given: flame A is produced by methane; flames B and C are capable of being produced with either methane or propane. Has the status of a Basic Safety Publication in accordance with IEC Guide 104. Identical to and reproduced from IEC/TS 60695-11-4:2004 including Amendment 1.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$123.30 NZD
|
|
| HardCopy |
$137.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 60695.11.4:2004
Contents
Preface
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Method A Production of a standardized nominal 5
4.1 Requirements
4.2 Apparatus and fuel
4.2.1 Burner
4.2.2 Flowmeter
4.2.3 Manometer
4.2.4 Control valve
4.2.5 Copper block
4.2.6 Thermocouple
4.2.7 Temperature/time indicating/recording devices
4.2.8 Fuel gas
4.2.9 Laboratory fumehood/chamber
4.3 Production of test flame
4.4 Confirmation of the test flame
4.4.1 Principle
4.4.2 Procedure
4.4.3 Verification
5 Method B
6 Method C
7 Classification and designation
Figure 1 - Copper block
Figure 2 - Flame height gauge
Annex A Test arrangements - Method A
Figure A.1 - Burner method A - General assembly
Figure A.2 - Burner details
Figure A.3 - Supply arrangement for burner (example)
Figure A.4 - Confirmatory test arrangement
Annex B (withdrawn)
Annex C (withdrawn)
Annex D Recommended arrangements for the use of the test flame
Annex E Clearance gauge
Figure E.1 - Clearance gauge
Annex F Test arrangements for tests on equipment
Figure F.1 - Examples of test arrangements
Annex G Test arrangements for tests on bar test specimens
Figure G.1 - Examples of test arrangements
Annex H Access to equipment manufacturers and suppliers
Bibliography
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 3000:2018
Electrical installations - Known as the Australian/New Zealand Wiring Rules -
AS/NZS 3000:2018 A1
Electrical installations (known as the Australian/New Zealand Wiring Rules): Amendment 1 -
AS/NZS 3000:2018 A2
Electrical Installations (known as the Australian/New Zealand Wiring Rules)
-
AS/NZS 3000:2018 A3
Electrical installations (known as the Australian/New Zealand Wiring Rules)
AS/NZS 60695.11.4:2004
Contents
Preface
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Method A Production of a standardized nominal 5
4.1 Requirements
4.2 Apparatus and fuel
4.2.1 Burner
4.2.2 Flowmeter
4.2.3 Manometer
4.2.4 Control valve
4.2.5 Copper block
4.2.6 Thermocouple
4.2.7 Temperature/time indicating/recording devices
4.2.8 Fuel gas
4.2.9 Laboratory fumehood/chamber
4.3 Production of test flame
4.4 Confirmation of the test flame
4.4.1 Principle
4.4.2 Procedure
4.4.3 Verification
5 Method B
6 Method C
7 Classification and designation
Figure 1 - Copper block
Figure 2 - Flame height gauge
Annex A Test arrangements - Method A
Figure A.1 - Burner method A - General assembly
Figure A.2 - Burner details
Figure A.3 - Supply arrangement for burner (example)
Figure A.4 - Confirmatory test arrangement
Annex B (withdrawn)
Annex C (withdrawn)
Annex D Recommended arrangements for the use of the test flame
Annex E Clearance gauge
Figure E.1 - Clearance gauge
Annex F Test arrangements for tests on equipment
Figure F.1 - Examples of test arrangements
Annex G Test arrangements for tests on bar test specimens
Figure G.1 - Examples of test arrangements
Annex H Access to equipment manufacturers and suppliers
Bibliography
Previous versions
AS/NZS 60695.11.4:2004
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.