AS/NZS 5813.1:2012
Information technology equipment - Energy performance of computers - Part 1: Methods of measurement of energy performance
Establishes minimum safety requirements for the design, construction and operation of mains-powered or battery-powered information technology equipment. Based on, but not equivalent to, the test method specified in the draft Standard IEC 62623-post CD Rev Nov 2.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$171.90 NZD
|
|
| HardCopy |
$191.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 REFERENCED DOCUMENTS
1.3 DEFINITIONS-GENERAL
1.3.1 Ambient temperature
1.3.2 As shipped
1.3.3 Computer
1.3.4 Equipment under test (EUT)
1.3.5 Local area network (LAN)
1.3.6 Manufacturer
1.3.7 Red green blue (RGB)
1.3.8 Total harmonic distortion (THD)
1.4 DEFINITIONS-COMPUTER TYPES
1.4.1 Desktop computer
1.4.2 Integrated computer or integrated desktop computer
1.4.3 Notebook and tablet computers
1.4.4 Small-scale server
1.4.5 Test operating system
1.5 DEFINITIONS-COMPONENTS
1.5.1 Computer monitor/display
1.5.2 Discrete graphics processing unit (dGfx)
1.5.3 External power supply (EPS)
1.5.4 Internal power supply (IPS)
1.6 DEFINITIONS-POWER MODES
1.6.1 On mode (Pon)
1.6.2 Idle modes
1.6.3 Active (work) mode (Pwork)
1.6.4 Sleep mode
1.6.5 Off mode (standby) with WoL disabled (Poff)
1.6.6 Off mode (standby) WoL enabled (PoffWoL)
1.7 DEFINITIONS-NETWORKING AND POWER MANAGEMENT
1.7.1 Full network connectivity
1.7.2 Network interface
1.7.3 Wake event
1.7.4 Wake on LAN (WoL)
1.8 ABBREVIATIONS
SECTION 2 GENERAL CONDITIONS FOR MEASUREMENT
2.1 GENERAL
2.2 POWER MEASUREMENTS
2.3 UNCERTAINTY, RESOLUTION AND ROUNDING
2.4 AMBIENT LIGHT METER SPECIFICATION
2.5 TEST ROOM
2.6 POWER SUPPLY
2.7 SUPPLY VOLTAGE WAVEFORM
SECTION 3 MEASUREMENT APPROACH
3.1 EUT PREPARATION
3.2 TEST SETUP
3.3 TESTING PROCEDURE
3.3.1 General
3.3.2 Off (standby) mode testing
3.3.3 Sleep mode testing
3.3.4 Long idle mode testing
3.3.5 Measuring short idle mode
3.3.6 Measuring active mode (see Clause 1.6.3)
3.3.7 End of testing configuration
SECTION 4 TEST REPORT
4.1 GENERAL
4.2 MANDATORY INFORMATION
4.2.1 Information provided by the test laboratory or the client
4.2.2 Information determined by the test laboratory
4.3 OPTIONAL INFORMATION
APPENDIX A - ENERGY STAR SHORT AND LONG IDLE MODES
A1 GENERAL
A2 SHORT IDLE (PidleS)ŒCOMPUTERS WITH AN EXTERNAL MONITOR/ DISPLAY
A3 LONG IDLE (PidleL)ŒCOMPUTERS WITH AN INTEGRATED MONITOR/ DISPLAY
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Energy Efficiency (Energy Using Products) Regulations 2002
Ministry: Ministry of Business Innovation and Employment - Energy Resources and Markets (ERM)
Section: Schedule 1
Citation context:Listed as a testing standard for computers
Similar Standards
-
AS/NZS 3802:1997
Data elements and interchange formats - Information interchange - Representation of dates and times
-
AS/NZS 5121:2015
Information technology - Vocabulary - Learning, education and training -
AS/NZS 5813.2:2012
Information technology equipment - Energy performance of computers - Part 2: Minimum energy performance standards (MEPS) for computers -
AS/NZS 5813.2:2012A1
Information technology equipment - Energy performance of computers - Part 2: Minimum energy performance standards (MEPS) for computers: Amendment 1:2013
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 REFERENCED DOCUMENTS
1.3 DEFINITIONS-GENERAL
1.3.1 Ambient temperature
1.3.2 As shipped
1.3.3 Computer
1.3.4 Equipment under test (EUT)
1.3.5 Local area network (LAN)
1.3.6 Manufacturer
1.3.7 Red green blue (RGB)
1.3.8 Total harmonic distortion (THD)
1.4 DEFINITIONS-COMPUTER TYPES
1.4.1 Desktop computer
1.4.2 Integrated computer or integrated desktop computer
1.4.3 Notebook and tablet computers
1.4.4 Small-scale server
1.4.5 Test operating system
1.5 DEFINITIONS-COMPONENTS
1.5.1 Computer monitor/display
1.5.2 Discrete graphics processing unit (dGfx)
1.5.3 External power supply (EPS)
1.5.4 Internal power supply (IPS)
1.6 DEFINITIONS-POWER MODES
1.6.1 On mode (Pon)
1.6.2 Idle modes
1.6.3 Active (work) mode (Pwork)
1.6.4 Sleep mode
1.6.5 Off mode (standby) with WoL disabled (Poff)
1.6.6 Off mode (standby) WoL enabled (PoffWoL)
1.7 DEFINITIONS-NETWORKING AND POWER MANAGEMENT
1.7.1 Full network connectivity
1.7.2 Network interface
1.7.3 Wake event
1.7.4 Wake on LAN (WoL)
1.8 ABBREVIATIONS
SECTION 2 GENERAL CONDITIONS FOR MEASUREMENT
2.1 GENERAL
2.2 POWER MEASUREMENTS
2.3 UNCERTAINTY, RESOLUTION AND ROUNDING
2.4 AMBIENT LIGHT METER SPECIFICATION
2.5 TEST ROOM
2.6 POWER SUPPLY
2.7 SUPPLY VOLTAGE WAVEFORM
SECTION 3 MEASUREMENT APPROACH
3.1 EUT PREPARATION
3.2 TEST SETUP
3.3 TESTING PROCEDURE
3.3.1 General
3.3.2 Off (standby) mode testing
3.3.3 Sleep mode testing
3.3.4 Long idle mode testing
3.3.5 Measuring short idle mode
3.3.6 Measuring active mode (see Clause 1.6.3)
3.3.7 End of testing configuration
SECTION 4 TEST REPORT
4.1 GENERAL
4.2 MANDATORY INFORMATION
4.2.1 Information provided by the test laboratory or the client
4.2.2 Information determined by the test laboratory
4.3 OPTIONAL INFORMATION
APPENDIX A - ENERGY STAR SHORT AND LONG IDLE MODES
A1 GENERAL
A2 SHORT IDLE (PidleS)ŒCOMPUTERS WITH AN EXTERNAL MONITOR/ DISPLAY
A3 LONG IDLE (PidleL)ŒCOMPUTERS WITH AN INTEGRATED MONITOR/ DISPLAY
AS/NZS 5813.1:2012
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.