AS/NZS 4847.1:2010 SELFBALLASTED LAMPS FOR GENERAL LIGHTING SERVICES - TEST METHODS-ENERGY PERFORMANCE
PREFACE
CONTENTS
FOREWORD
1 SCOPE
2 REFERENCED DOCUMENTS
3 DEFINITIONS
3.1 Apparent power
3.2 Average
3.3 Ballast
3.4 Colour
3.5 Covered lamp
3.6 Displacement power factor
3.7 Efficacy (lamp)
3.8 Energize
3.9 Final luminous flux
3.10 Illuminance (luminous intensity)
3.11 Initial luminous flux
3.12 Initial values
3.13 Lamp cap (lamp base)
3.14 Lamp failure
3.15 Lamp life
3.16 Lamp rated power (lamp rated wattage)
3.17 Lamp power (lamp input power) (lamp wattage)
3.18 Lumen maintenance
3.19 Luminous efficacy of a source
3.20 Luminous flux
3.21 Luminance
3.22 Lumen
3.23 Median lamp life (Average life)
3.24 New lamp
3.25 Radiant flux
3.26 Rated average life (rated life to 50% failures)
3.27 Rated values
3.28 Rated light output
3.29 Reflector lamp
3.30 Run-up time
3.31 Self ballasted compact fluorescent lamp
3.32 Stabilization time
3.33 Starting time
3.34 True Power factor
3.35 Test voltage
3.36 Type
3.37 Type test
3.38 Type test sample
3.39 Uncovered lamp (bare lamp)
4 LAMP REQUIREMENTS
4.1 General conditions
4.2 Starting time
4.3 Run-up time
4.4 Low temperature starting
4.5 Lamp wattage
4.6 True power factor
4.7 Luminous flux and initial efficacy
4.8 Colour and colour rendering index
4.9 Switching withstand
4.10 Lamp life and premature lamp failure
4.11 Lumen maintenance
4.12 Light distribution ratio
4.13 Harmonics and electromagnetic compatibility (EMC)
4.14 Mercury content determination
5 SAMPLING
6 TEST REPORT
APPENDIX A - GENERAL CONDITIONS FOR MEASUREMENT OF PHOTOMETRIC AND ELECTRICAL CHARACTERISTICS
A1 AIR MOVEMENT AND TEMPERATURE
A1.1 Test room
A1.2 Ageing room
A2 TEST VOLTAGE
A3 POSITION OF LAMP
A4 LAMP STABILIZATION
A5 LAMP AGEING
A6 MEASUREMENT EQUIPMENT AND ACCURACY
A6.1 Test voltage
A6.2 Test voltage for ageing
A7 ELECTRICAL MEASUREMENT
A8 LUMINOUS FLUX MEASUREMENT
A8.1 Measurement equipment for tests
A8.2 Integrating sphere
A8.3 Goniophotometer (distribution photometer)
A8.4 Spectroradiometer
A8.5 Colorimeter
A9 TIME MEASUREMENT
APPENDIX B - TEST FOR STARTING TIME
B1 GENERAL
B2 TEST CONDITIONS
B3 TEST PROCEDURE
B4 CALCULATIONS
APPENDIX C - TEST FOR RUN-UP TIME
C1 GENERAL
C2 TEST CONDITIONS
C3 PREPARATION OF APPARATUS
C4 TEST PROCEDURE
C5 CALCULATIONS
APPENDIX D - MEASUREMENT OF INITIAL LUMINOUS FLUX, EFFICACY AND LUMEN MAINTENANCE
D1 GENERAL
D2 TEST CONDITIONS AND PREPARATION OF APPARATUS
D2.1 All methods
D2.2 Method A1 (Integrating sphere measurement: spectral photometry) and Method A2 (Integrating sphere measurement: integrating method)
D2.3 Method B (Goniophotometer: distribution photometer)
D3 TEST PROCEDURE
D3.1 All methods
D3.2 Method A1 (Integrating sphere measurement: spectral photometry) and Method A2 (Integrating sphere measurement: integrating method)
D3.3 Method B (Goniophotometer: distribution photometer)
D3.4 Calculations
D4 INITIAL EFFICACY TEST
D4.1 Test procedure
D4.2 Calculations
D5 LUMEN MAINTENANCE AND MAINTAINED EFFICACY TESTS
APPENDIX E - TEST FOR LOW TEMPERATURE STARTING TIME
E1 GENERAL
E2 TEST CONDITIONS
E3 TEST PROCEDURE
APPENDIX F - TEST FOR SWITCHING WITHSTAND
APPENDIX G - TEST FOR LAMP LIFE AND PREMATURE LAMP FAILURE
APPENDIX H - TEST FOR LIGHT DISTRIBUTION
APPENDIX I - TEST REPORT
APPENDIX J - ABBREVIATIONS
