AS/NZS 4677:2010
Steel utility services poles
Applies to steel poles and their component parts which support any one of street lights, floodlights, aerial conductors, electromotive-transport conductors, traffic signals, communication equipment, or similar utility services, or any combination of these services.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$108.90 NZD
|
|
| HardCopy |
$121.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 4677:2010 STEEL UTILITY SERVICES POLES
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 APPLICATION
1.3 REFERENCED DOCUMENTS
1.4 DEFINITIONS AND DIMENSIONS
1.5 CLASSIFICATION
1.6 MARKING
1.6.1 General
1.6.2 Form of marking
SECTION 2 GENERAL REQUIREMENTS
2.1 MATERIALS
2.1.1 General
2.1.2 Structural steels
2.1.3 Bolts and bolting
2.1.4 Welding consumables
2.1.5 Concrete
2.2 DESIGN FOR STRENGTH AND SERVICEABILITY
2.3 FABRICATION
2.3.1 General
2.3.2 Welding
2.3.3 Bolting
2.3.4 Surface finish
2.3.5 Overlap length
2.4 ASSEMBLY AND ERECTION
2.4.1 Assembly
2.4.2 Erection
SECTION 3 PARTICULAR REQUIREMENTS
3.1 STREET LIGHTING POLES
3.1.1 General
3.1.2 Pole components
3.1.3 Base fixing
3.1.4 Electrical provisions
3.2 FLOODLIGHTING AND COMMUNICATION POLES
3.2.1 General
3.2.2 Pole components
3.2.3 Electrical provisions
3.2.4 Access for inspection or maintenance
3.3 AERIAL CONDUCTOR POLES
3.3.1 General
3.3.2 Pole components
3.3.3 Electrical earthing
3.3.4 Access for inspection and maintenance
3.4 TRAFFIC SIGNAL POLES
APPENDIX A - MEANS FOR DEMONSTRATING COMPLIANCE WITH THIS STANDARD
A1 SCOPE
A2 STATISTICAL SAMPLING
A3 PRODUCT CERTIFICATION
A4 SUPPLIER'S QUALITY MANAGEMENT SYSTEM
A5 OTHER MEANS OF ASSESSMENT
APPENDIX B - REFERENCED STANDARDS AND OTHER DOCUMENTS
APPENDIX C - EXAMPLES OF SLIP-BASE SYSTEMS
APPENDIX D - ELECTRICAL DISCONNECT SYSTEM
APPENDIX E - INFORMATION TO BE SUPPLIED BY PURCHASER
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
References
Lighting for roads and public spaces - Part 0: Introduction
Cold-formed structural steel hollow sections
High-strength steel bolts with associated nuts and washers for structural engineering
Covered electrodes for welding - Low carbon steel electrodes for manual metal-arc welding of carbon steels and carbon-manganese steels
Covered electrodes for welding - Low and intermediate alloy steel electrodes for manual metal-arc welding of carbon steels and low and intermediate alloy steels
Cold-rolled, unalloyed, steel sheet and strip
Structural steel - Hot-rolled plates, floorplates and slabs
Cold-formed steel structures
Structural design requirements for utility services poles
Steel utility services poles
Related Information
Similar Standards
-
AS/NZS 4065:2010
Concrete utility services poles
-
AS/NZS 4435.2:1999
Insulators - Composite for overhead power lines - Voltages greater than 1000 V a.c. - Standard strength classes and end fittings for string insulator units
-
AS/NZS 4676:2000
Structural design requirements for utility services poles
-
BS 1990-1:1984
Wood poles for overhead power and telecommunication lines, Specification for softwood poles
AS/NZS 4677:2010 STEEL UTILITY SERVICES POLES
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 APPLICATION
1.3 REFERENCED DOCUMENTS
1.4 DEFINITIONS AND DIMENSIONS
1.5 CLASSIFICATION
1.6 MARKING
1.6.1 General
1.6.2 Form of marking
SECTION 2 GENERAL REQUIREMENTS
2.1 MATERIALS
2.1.1 General
2.1.2 Structural steels
2.1.3 Bolts and bolting
2.1.4 Welding consumables
2.1.5 Concrete
2.2 DESIGN FOR STRENGTH AND SERVICEABILITY
2.3 FABRICATION
2.3.1 General
2.3.2 Welding
2.3.3 Bolting
2.3.4 Surface finish
2.3.5 Overlap length
2.4 ASSEMBLY AND ERECTION
2.4.1 Assembly
2.4.2 Erection
SECTION 3 PARTICULAR REQUIREMENTS
3.1 STREET LIGHTING POLES
3.1.1 General
3.1.2 Pole components
3.1.3 Base fixing
3.1.4 Electrical provisions
3.2 FLOODLIGHTING AND COMMUNICATION POLES
3.2.1 General
3.2.2 Pole components
3.2.3 Electrical provisions
3.2.4 Access for inspection or maintenance
3.3 AERIAL CONDUCTOR POLES
3.3.1 General
3.3.2 Pole components
3.3.3 Electrical earthing
3.3.4 Access for inspection and maintenance
3.4 TRAFFIC SIGNAL POLES
APPENDIX A - MEANS FOR DEMONSTRATING COMPLIANCE WITH THIS STANDARD
A1 SCOPE
A2 STATISTICAL SAMPLING
A3 PRODUCT CERTIFICATION
A4 SUPPLIER'S QUALITY MANAGEMENT SYSTEM
A5 OTHER MEANS OF ASSESSMENT
APPENDIX B - REFERENCED STANDARDS AND OTHER DOCUMENTS
APPENDIX C - EXAMPLES OF SLIP-BASE SYSTEMS
APPENDIX D - ELECTRICAL DISCONNECT SYSTEM
APPENDIX E - INFORMATION TO BE SUPPLIED BY PURCHASER
Previous versions
AS/NZS 4677:2010
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.