AS/NZS 4665.1:2005 A1
Performance of external power supplies - Test method and energy performance mark: Amendment 1
Amendment applies to the Preface, Clauses 1.1 and 1.3 and Appendices A, B and C.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$0.00 NZD
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 4665.1:2005 PERFORMANCE OF EXTERNAL POWER SUPPLIES - TEST METHOD AND ENERGY PERFORMANCE MARK
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 REFERENCED DOCUMENTS
1.3 DEFINITIONS
1.3.1 Active mode
1.3.2 Active mode efficiency
1.3.3 Active power
1.3.4 Ambient temperature
1.3.5 Apparent power (S)
1.3.6 Equipment under test (EUT)
1.3.7 Extra low voltage (ELV)
1.3.8 Family of models-Non user selectable output voltage
1.3.9 Multi-switch model-User selectable output voltage
1.3.10 Nameplate input frequency
1.3.11 Nameplate input voltage
1.3.12 Nameplate output current
1.3.13 Nameplate output power (Pno)
1.3.14 Nameplate output voltage
1.3.15 No load
1.3.16 No load power
1.3.17 Power factor (true)
1.3.18 Single model(s)
1.3.19 Single output external power supply
1.3.20 Total harmonic distortion (THD)
SECTION 2 GENERAL CONDITIONS FOR MEASUREMENT
2.1 GENERAL
2.2 ROUNDING
2.3 MEASURING EQUIPMENT
2.4 TEST ROOM
2.5 TEST VOLTAGE
2.6 A.C. REFERENCE SOURCE
SECTION 3 MEASUREMENT APPROACH
3.1 PREPARING EUT FOR TEST
3.2 LOAD CONDITIONS
3.3 TEST LOAD
3.4 TESTING SEQUENCE
3.5 EFFICIENCY CALCULATION
3.6 POWER CONSUMPTION CALCULATION
SECTION 4 ENERGY PERFORMANCE MARK
SECTION 5 TEST REPORT
5.1 GENERAL
5.2 MANDATORY INFORMATION
5.3 OPTIONAL INFORMATION
5.4 SAMPLE TEST REPORT
APPENDIX A - ENERGY PERFORMANCE MARK
A1 REQUIREMENT
A2 DESIGN OF THE ENERGY PERFORMANCE MARK
A2.1 General
A2.2 Single performance mark when tested at 115 V a.c., 230 V a.c. and 240 V a.c. or has a single input voltage
A2.3 Dual marking
A2.4 Performance mark for models capable of multiple input voltages when tested at 230 V a.c. only
A2.5 Performance mark for models capable of multiple input voltages when tested at 115 V a.c. only
APPENDIX B - FLOWCHART FOR DEFINITION OF SINGLE OUTPUT EXTERNAL POWER SUPPLY
APPENDIX C - SAMPLE TEST REPORT
Related Information
Energy Efficiency (Energy Using Products) Regulations 2002
Ministry: Ministry of Business Innovation and Employment - Energy Resources and Markets (ERM)
Section: Schedule 1
Citation context:Listed as a testing Standard for external power supplies.
Energy Efficiency (Energy Using Products) Regulations 2002
Ministry: Ministry of Business Innovation and Employment - Energy Resources and Markets (ERM) - EECA
Section: Schedule 1
Citation context:Listed as a testing Standard for external power supplies
Similar Standards
-
AS/NZS 1284.13:2002
Electricity metering - In-service compliance testing
-
AS/NZS 2500:2020
Safe use of medical electrical equipment in health care -
AS/NZS 3000:2018
Electrical installations - Known as the Australian/New Zealand Wiring Rules -
AS/NZS 3000:2018 A1
Electrical installations (known as the Australian/New Zealand Wiring Rules): Amendment 1
AS/NZS 4665.1:2005 PERFORMANCE OF EXTERNAL POWER SUPPLIES - TEST METHOD AND ENERGY PERFORMANCE MARK
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 REFERENCED DOCUMENTS
1.3 DEFINITIONS
1.3.1 Active mode
1.3.2 Active mode efficiency
1.3.3 Active power
1.3.4 Ambient temperature
1.3.5 Apparent power (S)
1.3.6 Equipment under test (EUT)
1.3.7 Extra low voltage (ELV)
1.3.8 Family of models-Non user selectable output voltage
1.3.9 Multi-switch model-User selectable output voltage
1.3.10 Nameplate input frequency
1.3.11 Nameplate input voltage
1.3.12 Nameplate output current
1.3.13 Nameplate output power (Pno)
1.3.14 Nameplate output voltage
1.3.15 No load
1.3.16 No load power
1.3.17 Power factor (true)
1.3.18 Single model(s)
1.3.19 Single output external power supply
1.3.20 Total harmonic distortion (THD)
SECTION 2 GENERAL CONDITIONS FOR MEASUREMENT
2.1 GENERAL
2.2 ROUNDING
2.3 MEASURING EQUIPMENT
2.4 TEST ROOM
2.5 TEST VOLTAGE
2.6 A.C. REFERENCE SOURCE
SECTION 3 MEASUREMENT APPROACH
3.1 PREPARING EUT FOR TEST
3.2 LOAD CONDITIONS
3.3 TEST LOAD
3.4 TESTING SEQUENCE
3.5 EFFICIENCY CALCULATION
3.6 POWER CONSUMPTION CALCULATION
SECTION 4 ENERGY PERFORMANCE MARK
SECTION 5 TEST REPORT
5.1 GENERAL
5.2 MANDATORY INFORMATION
5.3 OPTIONAL INFORMATION
5.4 SAMPLE TEST REPORT
APPENDIX A - ENERGY PERFORMANCE MARK
A1 REQUIREMENT
A2 DESIGN OF THE ENERGY PERFORMANCE MARK
A2.1 General
A2.2 Single performance mark when tested at 115 V a.c., 230 V a.c. and 240 V a.c. or has a single input voltage
A2.3 Dual marking
A2.4 Performance mark for models capable of multiple input voltages when tested at 230 V a.c. only
A2.5 Performance mark for models capable of multiple input voltages when tested at 115 V a.c. only
APPENDIX B - FLOWCHART FOR DEFINITION OF SINGLE OUTPUT EXTERNAL POWER SUPPLY
APPENDIX C - SAMPLE TEST REPORT
AS/NZS 4665.1:2005 A1
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.