AS/NZS 4441:2017
Oriented PVC (PVC-O) pipes for pressure applications
Specifies the general aspects of pipes and joints made of oriented unplasticised poly(vinyl chloride) (PVC-O) for piping systems intended to be used underground or above-ground where not exposed to direct sunlight, for water mains and for services, for pressurised sewer systems and for irrigation systems. Adopted with national modifications from ISO 16422:2014.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$132.30 NZD
|
|
| HardCopy |
$147.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 1477:2017 PVC pipes and fittings for pressure applications
Preface
Foreword
Section 1 Scope and general
1.1 Scope
Section 1.2 Application
Section 1.3 Normative references
Section 1.4 Definitions
1.5 Notation
1.6 Classification
Section 2 General requirements
2.1 Scope of section
2.2 Composition
2.3 Dimensions
2.4 Colour
2.4.1 Series 1
2.4.2 Series 2
2.4.3 Recycled water
2.4.4 Sewer
2.4.5 Other colours
2.5 Freedom from defects
2.5.1 General
2.5.2 Cleanliness
2.5.3 Ends
2.6 Requirements for elastomeric jointing rings
2.7 Witness mark
2.8 Additional requirements for best environmental practice PVC pipes and fittings
Section 3 Performance requirements
3.1 Scope of section
3.2 Common tests
3.2.1 Effect on water
3.2.2 Vinyl chloride monomer test
3.3 Pipe tests
3.3.1 Long-term hydrostatic pressure test
3.3.2 Impact characteristics at 20°C
3.3.3 Reversion test
3.3.4 High temperature test
3.3.5 Fracture toughness test (only applicable to pipes DN ≥80 and Tmin ≥4.0 mm)
3.3.6 Short-term hydrostatic pressure test
3.4 Fittings tests
3.4.1 Long-term tensile stress test
3.4.2 Tightening torque test
3.4.3 Short-term hydrostatic pressure test
3.4.4 High-temperature stress relief
3.5 Elastomeric seal joint tests
3.5.1 Joint hydrostatic test
3.5.2 Joint infiltration test
3.6 Testing summary
Section 4 Pipes
4.1 Scope of section
4.2 Diameter and wall thickness
4.3 Length
4.3.1 Effective length
4.3.2 Spigoted and socketed pipe for elastomeric ring jointing
4.3.3 Spigoted and socketed pipe for solvent cement jointing
4.3.4 Plain-ended pipe
4.4 Pipe spigot ends
4.5 Sockets formed on pipes
4.5.1 Tolerances
4.5.2 Series 1 pipe for solvent cement jointing
4.5.3 Pipes for elastomeric seal jointing
4.5.4 Deflection of sockets
4.6 Marking
4.7 Storage and transport
Section 5 Moulded fittings
5.1 Scope of section
5.2 Dimensions
5.2.1 General
5.2.2 Spigot ends on moulded fittings
5.2.3 Sockets on moulded fittings
5.3 Wall thickness
5.3.1 Minimum thickness
5.3.2 Special fittings of varying, tapered or non circular cross-section
5.4 Threaded fittings
5.4.1 General
5.4.2 Fastening pipe threads
5.4.3 Sealing pipe threads
5.5 Marking
5.5.1 General
5.5.2 Additional marking for parallel sockets
Section 6 Post-formed bends and couplings
6.1 Scope of section
6.2 Requirements
6.3 Sockets
6.4 Marking
Section 7 Elastomeric seal joints
7.1 Scope of section
7.2 Joint design
7.3 Wall thickness
7.4 Socket depth
Appendix A (normative) Means for demonstrating conformity with this standard
[Appendix deleted.]
Bibliography
Amendment control sheet
Amendments
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 1254:2010
PVC-U pipes and fittings for stormwater and surface water applications
-
AS/NZS 1254:2010 A1
PVC-U pipes and fittings for stormwater and surface water applications: Amendment 1 -
AS/NZS 1254:2010 A2
PVC-U pipes and fittings for stormwater and surface water applications: Amendment 2 -
AS/NZS 1254:2010 A3
PVC-U pipes and fittings for stormwater and surface water applications: Amendment 3
AS/NZS 1477:2017 PVC pipes and fittings for pressure applications
Preface
Foreword
Section 1 Scope and general
1.1 Scope
Section 1.2 Application
Section 1.3 Normative references
Section 1.4 Definitions
1.5 Notation
1.6 Classification
Section 2 General requirements
2.1 Scope of section
2.2 Composition
2.3 Dimensions
2.4 Colour
2.4.1 Series 1
2.4.2 Series 2
2.4.3 Recycled water
2.4.4 Sewer
2.4.5 Other colours
2.5 Freedom from defects
2.5.1 General
2.5.2 Cleanliness
2.5.3 Ends
2.6 Requirements for elastomeric jointing rings
2.7 Witness mark
2.8 Additional requirements for best environmental practice PVC pipes and fittings
Section 3 Performance requirements
3.1 Scope of section
3.2 Common tests
3.2.1 Effect on water
3.2.2 Vinyl chloride monomer test
3.3 Pipe tests
3.3.1 Long-term hydrostatic pressure test
3.3.2 Impact characteristics at 20°C
3.3.3 Reversion test
3.3.4 High temperature test
3.3.5 Fracture toughness test (only applicable to pipes DN ≥80 and Tmin ≥4.0 mm)
3.3.6 Short-term hydrostatic pressure test
3.4 Fittings tests
3.4.1 Long-term tensile stress test
3.4.2 Tightening torque test
3.4.3 Short-term hydrostatic pressure test
3.4.4 High-temperature stress relief
3.5 Elastomeric seal joint tests
3.5.1 Joint hydrostatic test
3.5.2 Joint infiltration test
3.6 Testing summary
Section 4 Pipes
4.1 Scope of section
4.2 Diameter and wall thickness
4.3 Length
4.3.1 Effective length
4.3.2 Spigoted and socketed pipe for elastomeric ring jointing
4.3.3 Spigoted and socketed pipe for solvent cement jointing
4.3.4 Plain-ended pipe
4.4 Pipe spigot ends
4.5 Sockets formed on pipes
4.5.1 Tolerances
4.5.2 Series 1 pipe for solvent cement jointing
4.5.3 Pipes for elastomeric seal jointing
4.5.4 Deflection of sockets
4.6 Marking
4.7 Storage and transport
Section 5 Moulded fittings
5.1 Scope of section
5.2 Dimensions
5.2.1 General
5.2.2 Spigot ends on moulded fittings
5.2.3 Sockets on moulded fittings
5.3 Wall thickness
5.3.1 Minimum thickness
5.3.2 Special fittings of varying, tapered or non circular cross-section
5.4 Threaded fittings
5.4.1 General
5.4.2 Fastening pipe threads
5.4.3 Sealing pipe threads
5.5 Marking
5.5.1 General
5.5.2 Additional marking for parallel sockets
Section 6 Post-formed bends and couplings
6.1 Scope of section
6.2 Requirements
6.3 Sockets
6.4 Marking
Section 7 Elastomeric seal joints
7.1 Scope of section
7.2 Joint design
7.3 Wall thickness
7.4 Socket depth
Appendix A (normative) Means for demonstrating conformity with this standard
[Appendix deleted.]
Bibliography
Amendment control sheet
Amendments
Previous versions
AS/NZS 4441:2017
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.