AS/NZS 4240.2:2009
Remote control systems for mining equipment - Operation and maintenance for underground metalliferous mining
Provides mine sites with the information to assist in the management of risks associated with the use of remote controlled mining equipment in underground metalliferous mines.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$155.70 NZD
|
|
| HardCopy |
$173.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 4240.2:2009 REMOTE CONTROL SYSTEMS FOR MINING EQUIPMENT - OPERATION AND MAINTENANCE FOR UNDERGROUND METALLIFEROUS...
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 APPLICATION
1.3 REFERENCED DOCUMENTS
1.4 DEFINITIONS
1.4.1 Back
1.4.2 Brow
1.4.3 Bund
1.4.4 Check sheet
1.4.5 Communication
1.4.6 Competent person
1.4.7 Competency
1.4.8 Cuddy
1.4.9 Development
1.4.10 Drawpoint
1.4.11 Exclusion zone
1.4.12 Ground control
1.4.13 Hazard
1.4.14 Knowledge
1.4.15 Load haul dump (LHD)
1.4.16 Line of sight (LOS)
1.4.17 Mobile equipment
1.4.18 Monitor
1.4.19 Mucking cycle
1.4.20 Risk
1.4.21 Risk analysis
1.4.22 Risk assessment
1.4.23 Risk criteria
1.4.24 Risk evaluation
1.4.25 Risk identification
1.4.26 Risk management
1.4.27 Risk management process
1.4.28 Self contained self rescuer (SCSR)
1.4.29 Stope
1.4.30 Teleremote operation
1.4.31 Underground
SECTION 2 MINE SAFETY MANAGEMENT PLAN
2.1 GENERAL
2.2 RECORD KEEPING AND DOCUMENTATION
2.3 TRAINING
2.4 MONITORING, SYSTEMS AUDIT AND REVIEW
SECTION 3 REMOTE CONTROLLED MINING EQUIPMENT-RISK IDENTIFICATION
3.1 SCOPE
3.2 LINE OF SIGHT (LOS) OPERATIONS
3.2.1 Required outcome
3.2.2 Main risks
3.2.3 Main risk considerations
3.3 TELEREMOTE (TR) OPERATIONS
3.3.1 Required outcome
3.3.2 Main risks
3.3.3 Main risk considerations
3.4 PLANNING AND DESIGN
3.4.1 Required outcome
3.4.2 Main risks
3.4.3 Main risk considerations
3.5 SAFE WORK LOCATIONS
3.5.1 Required outcome
3.5.2 Main risks
3.5.3 Main risks considerations
3.6 MAINTENANCE
3.6.1 Required outcome
3.6.2 Main risks
3.6.3 Main risk considerations
3.7 EQUIPMENT
3.7.1 Required outcome
3.7.2 Main risks
3.7.3 Main risk considerations
3.8 PERSONNEL
3.8.1 Required outcome
3.8.2 Main risks
3.8.3 Main risk considerations
3.9 ENVIRONMENTAL
3.9.1 Required outcome
3.9.2 Main risks
3.9.3 Main risk considerations
3.10 EQUIPMENT RECOVERY
3.10.1 Required outcome
3.10.2 Main risks
3.10.3 Main risk considerations
APPENDIX A - ADDITIONAL RISK ASSESSMENT GUIDANCE MATERIAL
A1 General
A2 LINE OF SIGHT
A3 TELEREMOTE OPERATION
A4 MINE PLANNING AND DESIGN
A5 PERSONNEL
A6 ENVIRONMENTAL
A7 EQUIPMENT
A8 MAINTENANCE
A9 SAFE WORK LOCATIONS (SWL)
A10 RECOVERY
APPENDIX B - EXAMPLES OF LINE OF SIGHT REMOTE CONTROL LHD OPERATION
APPENDIX C - EXAMPLES OF TELEREMOTE LHD OPERATIONS
APPENDIX D - TYPICAL BUNDING OF OPEN DRAWPOINTS
APPENDIX E - EXAMPLES OF REMOTE CONTROL LHD CHECK SHEETS
APPENDIX F - SAFE WORK PROCEDURE-REMOTE LHD FUNCTIONAL TEST SHEET
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: Schedule 4, Clause 15
Citation context:Remote controls for mining equipment: AS/NZS 4240.1:2009 Remote control systems for mining equipment—Design, construction, testing, installation and commissioning, AS/NZS 4240.2:2009 Remote control systems for mining equipment—Operation and maintenance for underground metalliferous mining, AS/NZS 4240.3:2013 Remote control systems for mining equipment— Operation and maintenance for underground coal mining
Similar Standards
-
AS/NZS 1299:2009
Electrical equipment for mines and quarries - Explosion-protected three-phase restrained plugs and receptacles for working voltages up to and including 3.3 kV
-
AS/NZS 1299:2009 A1
Electrical equipment for mines and quarries - Explosion-protected three-phase restrained plugs and receptacles for working voltages up to and including 3.3 kV: Amendment 1:2012 -
AS/NZS 1300:2009
Electrical equipment for mines and quarries - Bolted explosion-protected three-phase cable coupling devices
-
AS/NZS 1300:2009 A1
Electrical equipment for mines and quarries - Bolted explosion-protected three-phase cable coupling devices: Amendment 1:2012
AS/NZS 4240.2:2009 REMOTE CONTROL SYSTEMS FOR MINING EQUIPMENT - OPERATION AND MAINTENANCE FOR UNDERGROUND METALLIFEROUS...
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 APPLICATION
1.3 REFERENCED DOCUMENTS
1.4 DEFINITIONS
1.4.1 Back
1.4.2 Brow
1.4.3 Bund
1.4.4 Check sheet
1.4.5 Communication
1.4.6 Competent person
1.4.7 Competency
1.4.8 Cuddy
1.4.9 Development
1.4.10 Drawpoint
1.4.11 Exclusion zone
1.4.12 Ground control
1.4.13 Hazard
1.4.14 Knowledge
1.4.15 Load haul dump (LHD)
1.4.16 Line of sight (LOS)
1.4.17 Mobile equipment
1.4.18 Monitor
1.4.19 Mucking cycle
1.4.20 Risk
1.4.21 Risk analysis
1.4.22 Risk assessment
1.4.23 Risk criteria
1.4.24 Risk evaluation
1.4.25 Risk identification
1.4.26 Risk management
1.4.27 Risk management process
1.4.28 Self contained self rescuer (SCSR)
1.4.29 Stope
1.4.30 Teleremote operation
1.4.31 Underground
SECTION 2 MINE SAFETY MANAGEMENT PLAN
2.1 GENERAL
2.2 RECORD KEEPING AND DOCUMENTATION
2.3 TRAINING
2.4 MONITORING, SYSTEMS AUDIT AND REVIEW
SECTION 3 REMOTE CONTROLLED MINING EQUIPMENT-RISK IDENTIFICATION
3.1 SCOPE
3.2 LINE OF SIGHT (LOS) OPERATIONS
3.2.1 Required outcome
3.2.2 Main risks
3.2.3 Main risk considerations
3.3 TELEREMOTE (TR) OPERATIONS
3.3.1 Required outcome
3.3.2 Main risks
3.3.3 Main risk considerations
3.4 PLANNING AND DESIGN
3.4.1 Required outcome
3.4.2 Main risks
3.4.3 Main risk considerations
3.5 SAFE WORK LOCATIONS
3.5.1 Required outcome
3.5.2 Main risks
3.5.3 Main risks considerations
3.6 MAINTENANCE
3.6.1 Required outcome
3.6.2 Main risks
3.6.3 Main risk considerations
3.7 EQUIPMENT
3.7.1 Required outcome
3.7.2 Main risks
3.7.3 Main risk considerations
3.8 PERSONNEL
3.8.1 Required outcome
3.8.2 Main risks
3.8.3 Main risk considerations
3.9 ENVIRONMENTAL
3.9.1 Required outcome
3.9.2 Main risks
3.9.3 Main risk considerations
3.10 EQUIPMENT RECOVERY
3.10.1 Required outcome
3.10.2 Main risks
3.10.3 Main risk considerations
APPENDIX A - ADDITIONAL RISK ASSESSMENT GUIDANCE MATERIAL
A1 General
A2 LINE OF SIGHT
A3 TELEREMOTE OPERATION
A4 MINE PLANNING AND DESIGN
A5 PERSONNEL
A6 ENVIRONMENTAL
A7 EQUIPMENT
A8 MAINTENANCE
A9 SAFE WORK LOCATIONS (SWL)
A10 RECOVERY
APPENDIX B - EXAMPLES OF LINE OF SIGHT REMOTE CONTROL LHD OPERATION
APPENDIX C - EXAMPLES OF TELEREMOTE LHD OPERATIONS
APPENDIX D - TYPICAL BUNDING OF OPEN DRAWPOINTS
APPENDIX E - EXAMPLES OF REMOTE CONTROL LHD CHECK SHEETS
APPENDIX F - SAFE WORK PROCEDURE-REMOTE LHD FUNCTIONAL TEST SHEET
AS/NZS 4240.2:2009
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.