AS/NZS 4024.3704:2024
Safety of machinery, Part 3704: Rail dependent storage and retrieval equipment – Safety requirements for S/R machines (EN 528:2021+A1:2022, MOD)
Standard adopts and modifies EN 528:2021+A1:2022, which specifies all significant hazards relevant to rail dependent storage and retrieval equipment, when they are used under the conditions intended by the manufacturer including reasonably foreseeable misuse.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$210.60 NZD
|
|
| HardCopy |
$234.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 4024.3704:2024 Safety of machinery Rail dependent storage and retrieval equipment - Safety requirements for S/R machines (EN 528:2021+A1:2022, MOD)
1 Scope
2 Normative references
3 Terms and definitions
4 Safety requirements and/or protective/risk reduction measures
4.1 General
4.2 Control position
4.2.1 General
4.2.2 Access to and egress from the permanent on-board control position
4.2.3 Floor of the on-board control position
4.2.4 Design and dimensioning of permanent on-board control position
4.2.4.1 Ergonomic principles
4.2.4.2 Safeguard operator against falling risks
4.2.4.3 Overhead protection
4.2.4.4 Structure
4.2.5 Emergency call device on permanent on-board control positions
4.2.6 Lighting on permanent on-board control position
4.3 Control equipment
4.3.1 General
4.3.2 Safeguard of the operator on a permanent on-board control position
4.3.3 Prevention of unauthorised operation (equipment switch)
4.3.4 Changing mode of operation (mode switch)
4.3.5 Key dependence
4.3.6 Control devices for powered movements
4.3.7 Control device identification
4.3.8 Stop function
4.3.8.1 Stop categories
4.3.8.2 Initiation of the stop-function
4.3.9 Emergency stop function
4.3.9.1 General
4.3.9.2 Location of actuators
4.3.9.3 Electronic devices
4.3.10 Safety requirements related to EMC
4.4 Hoist unit
4.4.1 Hoist unit brake
4.4.1.1 General
4.4.1.2 Acceleration and deceleration at permanent on-board control position
4.4.1.3 Arrangement
4.4.1.4 Manual brake release lever
4.4.2 Limitation of the lifting and lowering movement
4.4.3 Overload and slack condition protection
4.4.3.1 Overload protection
4.4.3.2 Slack condition protection
4.4.4 Safety gear and overspeed governor
4.4.4.1 General
4.4.4.2 Operation of the safety gear
4.4.4.3 Function of several safety gears
4.4.4.4 Breakage of or slackness in the overspeed governor rope or chain
4.4.4.5 Lead-screw drives or direct acting hydraulic drives
4.4.5 Suspension elements
4.4.5.1 General
4.4.5.2 Steel wire rope
4.4.5.3 Chain
4.4.5.4 Belt
4.4.6 Hydraulic drives
4.4.6.1 General
4.4.6.2 Hoses
4.4.6.3 Pressure relief valve
4.4.6.4 Prevention of lowering of the on-board control position
4.4.6.5 Parts of the lifting units which enter racks
4.4.6.6 Auxiliary hoist units
4.4.6.7 Cushion cylinder
4.4.7 Lead-screw drive
4.4.7.1 General
4.4.7.2 Lead-screw mechanism
4.4.7.3 Safety nut
4.4.7.4 Inspection of the load bearing nut
4.4.7.5 Lead-screw devices
4.4.8 Rack and pinion drives
4.4.8.1 General
4.4.8.2 Driving pinion
4.4.8.3 Visual examination of the pinions
4.5 Travel unit of the S/R machine
4.5.1 Travel unit braking system
4.5.1.1 General
4.5.1.2 Acceleration and deceleration at permanent on-board control position
4.5.1.3 Additional braking system
4.5.1.4 Machines with front and rear drive units
4.5.1.5 Self-acting parking brake
4.5.2 Speed reducing system
4.5.3 Limitation of travel
4.5.4 Anti-derailment devices
4.5.4.1 General
4.5.4.2 Rail junctions
4.5.4.3 Prevention from dropping
4.5.5 Stability
4.6 Load handling devices
4.6.1 Load stability
4.6.2 Determination of possible impacts on the rack
4.6.3 Rotating devices
4.6.4 Interlocking functions
4.6.5 Auxiliary handling equipment
4.6.6 Load position monitoring
4.6.7 Satellites
4.7 Electrical equipment
4.7.1 General
4.7.2 Electrical supply conditions
4.7.3 Environment
4.7.4 Supply disconnecting (isolating) device
4.7.4.1 General
4.7.4.2 Type
4.7.4.3 Means of disconnection for maintenance areas
4.7.4.4 Unintended connection
4.7.4.5 Unexpected start up, disconnection and unauthorised, inadvertent and/or mistaken connection
4.7.5 Protection against electric shock
4.7.6 Suspension of safeguarding
4.7.7 Overriding of safety functions
4.8 Transfer device
4.8.1 General
4.8.2 Retention of position
4.8.3 Movement
4.8.4 Interlocking functions
4.8.5 Stability
4.9 Maintenance repair and fault clearance
4.9.1 General
4.9.2 Maintenance position
4.9.2.1 General
4.9.2.2 Additional persons on lifting carriage
4.9.2.3 Movements with person on ladder opposite to the LHD
4.9.3 Emergency control position
4.9.4 Speed limitation
4.9.5 Communication
4.9.6 Protection from operating machines (S/R machines and its transfer equipment)
4.9.7 Access along the mast
4.9.7.1 General
4.9.7.2 Climb assistance system
4.9.7.3 Powered Access cabin
4.10 Machine environment
4.10.1 General
4.10.2 Communication of force information
4.10.3 Safety clearances
4.10.4 Safeguarding of persons (Limiting access)
4.10.4.1 General
4.10.4.2 Enclosure, doors and/or removable panels
4.10.4.3 Means of separation within racking
4.10.4.4 Correct entry/exit procedure
4.10.5 Load entry / exit points
4.10.5.1 General
4.10.5.2 Load entry / exit points at manually operated picking workplaces
4.10.5.3 High-level-P&D stations
4.10.6 Escape from dangerous areas
4.10.6.1 Leaving of the aisle
4.10.6.2 Leaving for emergency purposes
4.10.6.3 Escape routes which cross aisles
4.10.7 Protection against unintentional load movement
4.10.7.1 General
4.10.7.2 Prevention against load/satellite falling into adjacent automatically operated aisles
4.10.7.3 Prevention against load/satellite falling into other areas accessible to persons
4.10.7.4 Vibration of the rack
4.10.8 Protection against falling
5 Verification of safety requirements and/or measures
5.1 Examination
5.1.1 General
5.1.2 Movements to be done
5.1.3 Test of the safety gear
5.1.4 Verification of the mechanical limits of travel
5.1.5 Test of the lowering control valve
5.1.6 Written record
5.2 EMC
5.3 Noise
5.3.1 General
5.3.2 Noise measurement
5.3.2.1 General
5.3.2.2 Fully automatic machines
5.3.2.3 Machines with permanent on-board operator
5.3.3 Declaration
5.4 Load tests
5.4.1 Test load
5.4.2 Static load test
5.4.3 Dynamic load test
5.4.4 Load test record
6 Information for use
6.1 General
6.2 Erection on site
6.3 Commissioning
6.3.1 Method statement
6.3.2 Instructions
6.3.3 Training
6.3.4 Safety devices
6.3.5 Individual elements of the machine
6.3.6 Integrated commissioning
6.4 Normal operation
6.4.1 General
6.4.2 Operation and use
6.4.3 Maintenance, repair and fault-clearing
6.4.4 Spare parts
6.4.5 Certification of suspension elements
6.4.6 Noise declaration
6.4.7 Test report
6.4.8 Minimum markings
6.4.8.1 Identification plate
6.4.8.2 Carrying capacity
6.4.8.3 Operating instructions
6.4.8.4 Warning signs
6.4.9 Conditions for the safe operation of equipment
6.4.9.1 General
6.4.9.2 Intended use
6.4.9.3 Operator
6.4.9.4 Number of persons on-board
6.4.9.5 Behaviour in case of failures
6.4.9.6 Checking the aisle
6.4.9.7 Access to the aisles
6.4.9.8 Permit to work system
6.4.9.9 Proper working safety devices
6.4.9.10 Maximum permissible load
6.4.9.11 Load
6.4.9.12 Free travel area
6.4.9.13 Safe key procedure
6.4.9.14 Only one key
6.4.9.15 Entering the permanent on-board control position
6.4.9.16 Emergency
6.4.9.17 Emergency procedures
6.4.9.18 Defective load
6.4.9.19 Safe leaving of the machine
6.4.9.20 Person on the lifting carriage
6.4.9.21 Regular testing
6.5 Fault finding/troubleshooting
6.5.1 General
6.5.2 Description of safe access and egress to trouble points on the S/R machine
6.5.3 Description of safe access and egress to trouble points at the interface between S/R machine and racking
6.5.4 Description of safe access and egress to trouble points at the interface between the S/R machine and the conveying system
6.5.5 Training
6.6 Rescue of persons
6.7 Maintenance, inspection, testing and training
6.7.1 General
6.7.2 Maintenance
6.7.2.1 Regular intervals
6.7.2.2 Safe maintenance
6.7.2.3 Maintenance staff
6.7.2.4 Records
6.7.2.5 Main isolator
6.7.2.6 Avoid electric hazards
6.7.2.7 Safe working
6.7.2.8 Damage found during maintenance work
6.7.2.9 Two or more machines on one rail
6.7.2.10 Machine recovery
6.7.3 Periodic maintenance and testing
6.7.3.1 Minimum maintenance
6.7.3.2 Test after works
6.7.3.3 Written records
6.7.3.4 Date of next inspection
6.7.3.5 Limited lifetime components
6.7.4 Training
6.8 Dismantling
Annex€A (informative)Figures
Annex€B (normative)Performance levels according to EN€ISO€138491:2015
Annex€C (normative)Preventing access to dangerous movements across the load entry/exit points
C.1 General
C.2 Preventing access besides the conveyor
C.2.1 Preventing access between conveyor and fixed guards
C.2.2 Preventing access between conveyor tracks
C.3 Preventing access under the conveyor
C.4 Preventing access over the conveyor
C.4.1 General
C.4.2 Preventing access by limited opening height and tunnels
C.4.3 Preventing access by minimum height of conveying level
C.4.4 Preventing access by design of gravity roller conveyor
C.4.5 Preventing access by mechanical guards
C.5 Stopping the dangerous movement of the S/R-machines
C.6 Additional organizational measures
Annex€D (normative)Access to restricted areas
Annex€E (normative)Verification of safety requirements and/or measures
Annex€F (normative)List of significant and relevant hazards
Annex€ZA (informative)Relationship between this European Standard and the Essential Requirements of EU€Directive 2006/42/EU aimed to be covered
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
BS 6989:1989
Guide to Safety of storage equipment for loose bulk materials
-
BS 7611:1992
Specification for potato storage boxes for mechanical handling
-
BS EN 12195-2:2001
Load restraint assemblies on road vehicles. Safety, Web lashing made from man-made fibres
-
BS EN 12195-3:2001
Load restraint assemblies on road vehicles. Safety, Lashing chains
AS/NZS 4024.3704:2024 Safety of machinery Rail dependent storage and retrieval equipment - Safety requirements for S/R machines (EN 528:2021+A1:2022, MOD)
1 Scope
2 Normative references
3 Terms and definitions
4 Safety requirements and/or protective/risk reduction measures
4.1 General
4.2 Control position
4.2.1 General
4.2.2 Access to and egress from the permanent on-board control position
4.2.3 Floor of the on-board control position
4.2.4 Design and dimensioning of permanent on-board control position
4.2.4.1 Ergonomic principles
4.2.4.2 Safeguard operator against falling risks
4.2.4.3 Overhead protection
4.2.4.4 Structure
4.2.5 Emergency call device on permanent on-board control positions
4.2.6 Lighting on permanent on-board control position
4.3 Control equipment
4.3.1 General
4.3.2 Safeguard of the operator on a permanent on-board control position
4.3.3 Prevention of unauthorised operation (equipment switch)
4.3.4 Changing mode of operation (mode switch)
4.3.5 Key dependence
4.3.6 Control devices for powered movements
4.3.7 Control device identification
4.3.8 Stop function
4.3.8.1 Stop categories
4.3.8.2 Initiation of the stop-function
4.3.9 Emergency stop function
4.3.9.1 General
4.3.9.2 Location of actuators
4.3.9.3 Electronic devices
4.3.10 Safety requirements related to EMC
4.4 Hoist unit
4.4.1 Hoist unit brake
4.4.1.1 General
4.4.1.2 Acceleration and deceleration at permanent on-board control position
4.4.1.3 Arrangement
4.4.1.4 Manual brake release lever
4.4.2 Limitation of the lifting and lowering movement
4.4.3 Overload and slack condition protection
4.4.3.1 Overload protection
4.4.3.2 Slack condition protection
4.4.4 Safety gear and overspeed governor
4.4.4.1 General
4.4.4.2 Operation of the safety gear
4.4.4.3 Function of several safety gears
4.4.4.4 Breakage of or slackness in the overspeed governor rope or chain
4.4.4.5 Lead-screw drives or direct acting hydraulic drives
4.4.5 Suspension elements
4.4.5.1 General
4.4.5.2 Steel wire rope
4.4.5.3 Chain
4.4.5.4 Belt
4.4.6 Hydraulic drives
4.4.6.1 General
4.4.6.2 Hoses
4.4.6.3 Pressure relief valve
4.4.6.4 Prevention of lowering of the on-board control position
4.4.6.5 Parts of the lifting units which enter racks
4.4.6.6 Auxiliary hoist units
4.4.6.7 Cushion cylinder
4.4.7 Lead-screw drive
4.4.7.1 General
4.4.7.2 Lead-screw mechanism
4.4.7.3 Safety nut
4.4.7.4 Inspection of the load bearing nut
4.4.7.5 Lead-screw devices
4.4.8 Rack and pinion drives
4.4.8.1 General
4.4.8.2 Driving pinion
4.4.8.3 Visual examination of the pinions
4.5 Travel unit of the S/R machine
4.5.1 Travel unit braking system
4.5.1.1 General
4.5.1.2 Acceleration and deceleration at permanent on-board control position
4.5.1.3 Additional braking system
4.5.1.4 Machines with front and rear drive units
4.5.1.5 Self-acting parking brake
4.5.2 Speed reducing system
4.5.3 Limitation of travel
4.5.4 Anti-derailment devices
4.5.4.1 General
4.5.4.2 Rail junctions
4.5.4.3 Prevention from dropping
4.5.5 Stability
4.6 Load handling devices
4.6.1 Load stability
4.6.2 Determination of possible impacts on the rack
4.6.3 Rotating devices
4.6.4 Interlocking functions
4.6.5 Auxiliary handling equipment
4.6.6 Load position monitoring
4.6.7 Satellites
4.7 Electrical equipment
4.7.1 General
4.7.2 Electrical supply conditions
4.7.3 Environment
4.7.4 Supply disconnecting (isolating) device
4.7.4.1 General
4.7.4.2 Type
4.7.4.3 Means of disconnection for maintenance areas
4.7.4.4 Unintended connection
4.7.4.5 Unexpected start up, disconnection and unauthorised, inadvertent and/or mistaken connection
4.7.5 Protection against electric shock
4.7.6 Suspension of safeguarding
4.7.7 Overriding of safety functions
4.8 Transfer device
4.8.1 General
4.8.2 Retention of position
4.8.3 Movement
4.8.4 Interlocking functions
4.8.5 Stability
4.9 Maintenance repair and fault clearance
4.9.1 General
4.9.2 Maintenance position
4.9.2.1 General
4.9.2.2 Additional persons on lifting carriage
4.9.2.3 Movements with person on ladder opposite to the LHD
4.9.3 Emergency control position
4.9.4 Speed limitation
4.9.5 Communication
4.9.6 Protection from operating machines (S/R machines and its transfer equipment)
4.9.7 Access along the mast
4.9.7.1 General
4.9.7.2 Climb assistance system
4.9.7.3 Powered Access cabin
4.10 Machine environment
4.10.1 General
4.10.2 Communication of force information
4.10.3 Safety clearances
4.10.4 Safeguarding of persons (Limiting access)
4.10.4.1 General
4.10.4.2 Enclosure, doors and/or removable panels
4.10.4.3 Means of separation within racking
4.10.4.4 Correct entry/exit procedure
4.10.5 Load entry / exit points
4.10.5.1 General
4.10.5.2 Load entry / exit points at manually operated picking workplaces
4.10.5.3 High-level-P&D stations
4.10.6 Escape from dangerous areas
4.10.6.1 Leaving of the aisle
4.10.6.2 Leaving for emergency purposes
4.10.6.3 Escape routes which cross aisles
4.10.7 Protection against unintentional load movement
4.10.7.1 General
4.10.7.2 Prevention against load/satellite falling into adjacent automatically operated aisles
4.10.7.3 Prevention against load/satellite falling into other areas accessible to persons
4.10.7.4 Vibration of the rack
4.10.8 Protection against falling
5 Verification of safety requirements and/or measures
5.1 Examination
5.1.1 General
5.1.2 Movements to be done
5.1.3 Test of the safety gear
5.1.4 Verification of the mechanical limits of travel
5.1.5 Test of the lowering control valve
5.1.6 Written record
5.2 EMC
5.3 Noise
5.3.1 General
5.3.2 Noise measurement
5.3.2.1 General
5.3.2.2 Fully automatic machines
5.3.2.3 Machines with permanent on-board operator
5.3.3 Declaration
5.4 Load tests
5.4.1 Test load
5.4.2 Static load test
5.4.3 Dynamic load test
5.4.4 Load test record
6 Information for use
6.1 General
6.2 Erection on site
6.3 Commissioning
6.3.1 Method statement
6.3.2 Instructions
6.3.3 Training
6.3.4 Safety devices
6.3.5 Individual elements of the machine
6.3.6 Integrated commissioning
6.4 Normal operation
6.4.1 General
6.4.2 Operation and use
6.4.3 Maintenance, repair and fault-clearing
6.4.4 Spare parts
6.4.5 Certification of suspension elements
6.4.6 Noise declaration
6.4.7 Test report
6.4.8 Minimum markings
6.4.8.1 Identification plate
6.4.8.2 Carrying capacity
6.4.8.3 Operating instructions
6.4.8.4 Warning signs
6.4.9 Conditions for the safe operation of equipment
6.4.9.1 General
6.4.9.2 Intended use
6.4.9.3 Operator
6.4.9.4 Number of persons on-board
6.4.9.5 Behaviour in case of failures
6.4.9.6 Checking the aisle
6.4.9.7 Access to the aisles
6.4.9.8 Permit to work system
6.4.9.9 Proper working safety devices
6.4.9.10 Maximum permissible load
6.4.9.11 Load
6.4.9.12 Free travel area
6.4.9.13 Safe key procedure
6.4.9.14 Only one key
6.4.9.15 Entering the permanent on-board control position
6.4.9.16 Emergency
6.4.9.17 Emergency procedures
6.4.9.18 Defective load
6.4.9.19 Safe leaving of the machine
6.4.9.20 Person on the lifting carriage
6.4.9.21 Regular testing
6.5 Fault finding/troubleshooting
6.5.1 General
6.5.2 Description of safe access and egress to trouble points on the S/R machine
6.5.3 Description of safe access and egress to trouble points at the interface between S/R machine and racking
6.5.4 Description of safe access and egress to trouble points at the interface between the S/R machine and the conveying system
6.5.5 Training
6.6 Rescue of persons
6.7 Maintenance, inspection, testing and training
6.7.1 General
6.7.2 Maintenance
6.7.2.1 Regular intervals
6.7.2.2 Safe maintenance
6.7.2.3 Maintenance staff
6.7.2.4 Records
6.7.2.5 Main isolator
6.7.2.6 Avoid electric hazards
6.7.2.7 Safe working
6.7.2.8 Damage found during maintenance work
6.7.2.9 Two or more machines on one rail
6.7.2.10 Machine recovery
6.7.3 Periodic maintenance and testing
6.7.3.1 Minimum maintenance
6.7.3.2 Test after works
6.7.3.3 Written records
6.7.3.4 Date of next inspection
6.7.3.5 Limited lifetime components
6.7.4 Training
6.8 Dismantling
Annex€A (informative)Figures
Annex€B (normative)Performance levels according to EN€ISO€138491:2015
Annex€C (normative)Preventing access to dangerous movements across the load entry/exit points
C.1 General
C.2 Preventing access besides the conveyor
C.2.1 Preventing access between conveyor and fixed guards
C.2.2 Preventing access between conveyor tracks
C.3 Preventing access under the conveyor
C.4 Preventing access over the conveyor
C.4.1 General
C.4.2 Preventing access by limited opening height and tunnels
C.4.3 Preventing access by minimum height of conveying level
C.4.4 Preventing access by design of gravity roller conveyor
C.4.5 Preventing access by mechanical guards
C.5 Stopping the dangerous movement of the S/R-machines
C.6 Additional organizational measures
Annex€D (normative)Access to restricted areas
Annex€E (normative)Verification of safety requirements and/or measures
Annex€F (normative)List of significant and relevant hazards
Annex€ZA (informative)Relationship between this European Standard and the Essential Requirements of EU€Directive 2006/42/EU aimed to be covered
AS/NZS 4024.3704:2024
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.