AS/NZS 4024.1701:2019
Safety of machinery Part 1701: Human body measurements - Basic human body measurements for technological design
Provides a description of anthropometric measurements which can be used as a basis for comparison of population groups and for the creation of anthropometric databases (refer to ISO 15535). The basic list of measurements specified in this document is intended to serve as a guide for ergonomists who are required to define population groups and apply their knowledge to the geometric design of the places where people work and live. In addition, the list serves as a basis for extracting one- and two-dimensional measurements from three-dimensional scans (specified in ISO 20685-1). Also serves as a guide on how to take anthropometric measurements, but also gives information to the ergonomist and designer on the anatomical and anthropometrical bases and principles of measurement which are applied in the solution of design tasks. Identical to ISO 7250-1:2017
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$217.80 NZD
|
|
| HardCopy |
$242.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 4024.1701:2019 Safety of machinery Human body measurements - Basic human body measurements for technological design
Preface
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Measuring conditions and instruments
4.1 Conditions
4.2 Instruments
4.3 Further conditions
5 Landmarks
5.1 General
5.2 Acromion
5.3 Cervicale
5.4 Crotch level
5.5 Ectocanthus
5.6 Glabella
5.7 Iliospinale anterius — Anterior superior iliac spine
5.8 Lowest point of the rib cage
5.9 Menton
5.10 Mesosternale
5.11 Nuchale
5.12 Olecranon
5.13 Orbitale — Infraorbitale
5.14 Opisthocranion
5.15 Sellion
5.16 Stylion (radial stylion)
5.17 Suprapatella, sitting
5.18 Thelion
5.19 Tibiale
5.20 Tragion
5.21 Ulnar stylion
5.22 Vertex (top of head)
6 Basic anthropometric measurements
6.1 Measurements taken while the subject stands
6.1.1 Body mass (weight)
6.1.2 Stature (body height)
6.1.3 Eye height
6.1.4 Shoulder height
6.1.5 Elbow height
6.1.6 Iliac spine height, standing
6.1.7 Crotch height
6.1.8 Tibial height
6.1.9 Chest depth, standing
6.1.10 Body depth, standing
6.1.11 Chest breadth, standing
6.1.12 Hip breadth, standing
6.2 Measurements taken while the subject sits
6.2.1 Sitting height (erect)
6.2.2 Eye height, sitting
6.2.3 Cervicale height, sitting
6.2.4 Shoulder height, sitting
6.2.5 Elbow height, sitting
6.2.6 Shoulder-elbow length
6.2.7 Shoulder (biacromial) breadth
6.2.8 Shoulder (bideltoid) breadth
6.2.9 Elbow-to-elbow breadth
6.2.10 Hip breadth, sitting
6.2.11 Popliteal height, sitting
6.2.12 Thigh clearance
6.2.13 Knee height, sitting
6.2.14 Abdominal depth, sitting
6.2.15 Thorax depth
6.2.16 Buttock-abdomen depth, sitting
6.3 Measurements on specific body segments
6.3.1 Hand length (stylion)
6.3.2 Palm length
6.3.3 Hand breadth at metacarpals
6.3.4 Index finger length
6.3.5 Index finger breadth, proximal
6.3.6 Index finger breadth, distal
6.3.7 Foot length
6.3.8 Foot breadth
6.3.9 Head length
6.3.10 Head breadth
6.3.11 Face length (menton-sellion)
6.3.12 Head circumference
6.3.13 Sagittal arc
6.3.14 Bitragion arc
6.3.15 Thumb length
6.3.16 Thumb breadth
6.3.17 Hand thickness
6.3.18 Hand breadth including thumb
6.3.19 Arm circumference flexed
6.3.20 Forearm circumference flexed
6.4 Functional measurements
6.4.1 Wall-acromion distance
6.4.2 Grip reach; forward reach
6.4.3 Elbow-wrist length
6.4.4 Elbow-grip length
6.4.5 Fist (grip axis) height
6.4.6 Forearm-fingertip length
6.4.7 Buttock-popliteal length (seat depth)
6.4.8 Buttock-knee length
6.4.9 Neck circumference
6.4.10 Chest circumference
6.4.11 Waist circumference
6.4.12 Wrist circumference
6.4.13 Thigh circumference
6.4.14 Calf circumference
Annex A (informative) Correspondence between ISO 7250-1 dimension names and numbers and ISO 14738 and ISO 15534 anthropometric dimension codes
Bibliography
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
BS 3044:1990
Guide to ergonomics principles in the design and selection of office furniture
-
BS 4467:1991
Guide to dimensions in designing for elderly people
-
BS 7915:1998
Ergonomics of the thermal environment. Guide to design and evaluation of working practices for cold indoor environments
-
BS 7963:2000
Ergonomics of the thermal environment. Guide to the assessment of heat strain in workers wearing personal protective equipment
AS/NZS 4024.1701:2019 Safety of machinery Human body measurements - Basic human body measurements for technological design
Preface
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Measuring conditions and instruments
4.1 Conditions
4.2 Instruments
4.3 Further conditions
5 Landmarks
5.1 General
5.2 Acromion
5.3 Cervicale
5.4 Crotch level
5.5 Ectocanthus
5.6 Glabella
5.7 Iliospinale anterius — Anterior superior iliac spine
5.8 Lowest point of the rib cage
5.9 Menton
5.10 Mesosternale
5.11 Nuchale
5.12 Olecranon
5.13 Orbitale — Infraorbitale
5.14 Opisthocranion
5.15 Sellion
5.16 Stylion (radial stylion)
5.17 Suprapatella, sitting
5.18 Thelion
5.19 Tibiale
5.20 Tragion
5.21 Ulnar stylion
5.22 Vertex (top of head)
6 Basic anthropometric measurements
6.1 Measurements taken while the subject stands
6.1.1 Body mass (weight)
6.1.2 Stature (body height)
6.1.3 Eye height
6.1.4 Shoulder height
6.1.5 Elbow height
6.1.6 Iliac spine height, standing
6.1.7 Crotch height
6.1.8 Tibial height
6.1.9 Chest depth, standing
6.1.10 Body depth, standing
6.1.11 Chest breadth, standing
6.1.12 Hip breadth, standing
6.2 Measurements taken while the subject sits
6.2.1 Sitting height (erect)
6.2.2 Eye height, sitting
6.2.3 Cervicale height, sitting
6.2.4 Shoulder height, sitting
6.2.5 Elbow height, sitting
6.2.6 Shoulder-elbow length
6.2.7 Shoulder (biacromial) breadth
6.2.8 Shoulder (bideltoid) breadth
6.2.9 Elbow-to-elbow breadth
6.2.10 Hip breadth, sitting
6.2.11 Popliteal height, sitting
6.2.12 Thigh clearance
6.2.13 Knee height, sitting
6.2.14 Abdominal depth, sitting
6.2.15 Thorax depth
6.2.16 Buttock-abdomen depth, sitting
6.3 Measurements on specific body segments
6.3.1 Hand length (stylion)
6.3.2 Palm length
6.3.3 Hand breadth at metacarpals
6.3.4 Index finger length
6.3.5 Index finger breadth, proximal
6.3.6 Index finger breadth, distal
6.3.7 Foot length
6.3.8 Foot breadth
6.3.9 Head length
6.3.10 Head breadth
6.3.11 Face length (menton-sellion)
6.3.12 Head circumference
6.3.13 Sagittal arc
6.3.14 Bitragion arc
6.3.15 Thumb length
6.3.16 Thumb breadth
6.3.17 Hand thickness
6.3.18 Hand breadth including thumb
6.3.19 Arm circumference flexed
6.3.20 Forearm circumference flexed
6.4 Functional measurements
6.4.1 Wall-acromion distance
6.4.2 Grip reach; forward reach
6.4.3 Elbow-wrist length
6.4.4 Elbow-grip length
6.4.5 Fist (grip axis) height
6.4.6 Forearm-fingertip length
6.4.7 Buttock-popliteal length (seat depth)
6.4.8 Buttock-knee length
6.4.9 Neck circumference
6.4.10 Chest circumference
6.4.11 Waist circumference
6.4.12 Wrist circumference
6.4.13 Thigh circumference
6.4.14 Calf circumference
Annex A (informative) Correspondence between ISO 7250-1 dimension names and numbers and ISO 14738 and ISO 15534 anthropometric dimension codes
Bibliography
Previous versions
AS/NZS 4024.1701:2019
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.