AS/NZS 4013:2014
Domestic solid fuel burning appliances - Method for determination of flue gas emission
Sets out comprehensive specifications and instructions to enable any interested organization having the appropriate test equipment to determine the flue gas emissions of solid fuel burning appliances. Results of testing to the described method are also intended for use by consumers when selecting a domestic solid fuel burning appliance, and regulatory bodies when setting allowable emission limits for domestic solid fuel burning appliances.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$108.90 NZD
|
|
| HardCopy |
$121.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 4013:2014 DOMESTIC SOLID FUEL BURNING APPLIANCES-METHOD FOR DETERMINATION OF FLUE GAS EMISSION
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 APPLICATION
1.2.1 General
1.2.2 Included appliances
1.2.3 Excluded appliances
1.3 REFERENCED DOCUMENTS
1.4 DEFINITIONS
1.4.1 Appliances above 25 kW
1.4.2 Appliance particulate emission factor
1.4.3 Central heating appliance
1.4.4 Cooking stove appliance
1.4.5 IANZ
1.4.6 NATA
1.4.7 Particulate emission factor
1.4.8 Shall
1.4.9 Should
1.4.10 Standard pressure
1.4.11 Standard temperature
1.5 PRINCIPLE
SECTION 2 APPARATUS AND REAGENT
2.1 GENERAL
2.2 AMBIENT TEMPERATURE MEASUREMENT SYSTEM
2.3 AMBIENT AIR PRESSURE MEASUREMENT SYSTEM
2.4 WEIGHT DETERMINATION SYSTEM
2.5 SAMPLING TRAIN
2.6 DRAUGHT GAUGE
2.7 DESICCATORS
2.8 ACETONE
2.9 DISHES
2.10 CARBON DIOXIDE ANALYZER (OPTIONAL)
SECTION 3 CONFIGURATION OF TEST EQUIPMENT
3.1 GENERAL
3.2 DILUTION TUNNEL
3.2.1 Hood
3.2.2 Connectors
3.2.3 Bends
3.2.4 Sampling section
3.2.5 Extraction fan
3.2.6 Component assembly
3.2.7 Pitot tube location
3.3 SAMPLING TRAIN
3.3.1 General
3.3.2 Probe
3.3.3 Filter coupling
3.3.4 Temperature probes
3.3.5 Dryer coupling
3.3.6 Exhaust pump
3.3.7 Joint seals
SECTION 4 CALIBRATIONS
4.1 GENERAL
4.2 DRY GAS METER
4.3 DILUTION TUNNEL
4.4 WEIGHING INSTRUMENTS
4.5 TEMPERATURE MEASUREMENT
4.6 DIFFERENTIAL PRESSURE MANOMETER AND DRAUGHT GAUGE
4.7 CARBON DIOXIDE ANALYZER
SECTION 5 TEST FUEL
5.1 GENERAL
5.2 TEST FUEL REQUIREMENTS FOR AUSTRALIA
SECTION 6 TEST PROCEDURE
6.1 GENERAL
6.2 DILUTION HOOD AND TUNNEL
6.3 DILUTION TUNNEL
6.3.1 General
6.3.2 Flue pipe draught
6.4 TEST PREPARATION
6.4.1 Appliance preparation
6.4.2 Sample collection system
6.5 TEST FUEL LOAD
6.5.1 Preparation
6.5.2 Fuel-loading geometry
6.6 BURN CYCLES
6.7 SAMPLING TRAIN OPERATION
6.8 SAMPLE TREATMENT
6.9 SAMPLE MEASUREMENT
6.10 CALCULATIONS
6.10.1 Sample weight
6.10.2 Sample flow volume
6.10.3 Dilution tunnel flow volume
6.10.4 Volume ratio
6.10.5 Particulate emission weight
6.10.6 Particulate emission factor
6.10.7 Burn-rate emission factors
6.10.8 Appliance particulate emission factor
SECTION 7 MAXIMUM ALLOWABLE APPLIANCE PARTICULATE EMISSION FACTOR
7.1 FOR AUSTRALIA
7.1.1 Appliances without catalytic combustors
7.1.2 Appliances with catalytic combustors
7.2 FOR NEW ZEALAND
7.3 VALID TESTS
SECTION 8 TESTING DOCUMENTATION AND TEST REPORTS
8.1 GENERAL
8.2 DOCUMENTATION
8.3 TEST REPORT
8.4 RETENTION OF RECORDS
8.5 PUBLISHED RESULTS
SECTION 9 VARIATION FROM TESTED APPLIANCE
9.1 GENERAL
9.2 RETESTING EXEMPTION
SECTION 10 MARKING
APPENDIX A - DRY GAS METER CALIBRATION
A1 SCOPE
A2 PRINCIPLE
A3 APPARATUS
A4 PROCEDURE
A5 REPORT
APPENDIX B - DILUTION TUNNEL CALIBRATION
B1 SCOPE
B2 PRINCIPLE
B3 PROCEDURE
B4 REPORT
APPENDIX C - CARBON DIOXIDE INSTRUMENT CALIBRATION
C1 SCOPE
C2 PRINCIPLE
C3 APPARATUS
C4 CALIBRATION PROCEDURE
C5 CALIBRATION BEFORE EACH USE
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Resource Management (National Environmental Standards for Air Quality) Regulations 2004
Ministry: Ministry for the Environment
Section: 23(2)(a)
Citation context:The discharge must be measured in accordance with (a) the method specified in Australian/New Zealand Standard AS/NZS 4013:2014, Domestic solid fuel burning appliances—Method for determination of flue gas emissions; or ...
Similar Standards
-
AS/NZS 2918:2018
Domestic solid fuel burning appliances - Installation -
AS/NZS 3869:1999
Domestic solid fuel burning appliances - Design and construction
-
AS/NZS 4012:2014
Domestic solid fuel burning appliances - Method for determination of power output and efficiency -
AS/NZS 4012:2014 A1
Domestic solid fuel burning appliances - Method for determination of power output and efficiency: Amendment 1:2015
AS/NZS 4013:2014 DOMESTIC SOLID FUEL BURNING APPLIANCES-METHOD FOR DETERMINATION OF FLUE GAS EMISSION
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 APPLICATION
1.2.1 General
1.2.2 Included appliances
1.2.3 Excluded appliances
1.3 REFERENCED DOCUMENTS
1.4 DEFINITIONS
1.4.1 Appliances above 25 kW
1.4.2 Appliance particulate emission factor
1.4.3 Central heating appliance
1.4.4 Cooking stove appliance
1.4.5 IANZ
1.4.6 NATA
1.4.7 Particulate emission factor
1.4.8 Shall
1.4.9 Should
1.4.10 Standard pressure
1.4.11 Standard temperature
1.5 PRINCIPLE
SECTION 2 APPARATUS AND REAGENT
2.1 GENERAL
2.2 AMBIENT TEMPERATURE MEASUREMENT SYSTEM
2.3 AMBIENT AIR PRESSURE MEASUREMENT SYSTEM
2.4 WEIGHT DETERMINATION SYSTEM
2.5 SAMPLING TRAIN
2.6 DRAUGHT GAUGE
2.7 DESICCATORS
2.8 ACETONE
2.9 DISHES
2.10 CARBON DIOXIDE ANALYZER (OPTIONAL)
SECTION 3 CONFIGURATION OF TEST EQUIPMENT
3.1 GENERAL
3.2 DILUTION TUNNEL
3.2.1 Hood
3.2.2 Connectors
3.2.3 Bends
3.2.4 Sampling section
3.2.5 Extraction fan
3.2.6 Component assembly
3.2.7 Pitot tube location
3.3 SAMPLING TRAIN
3.3.1 General
3.3.2 Probe
3.3.3 Filter coupling
3.3.4 Temperature probes
3.3.5 Dryer coupling
3.3.6 Exhaust pump
3.3.7 Joint seals
SECTION 4 CALIBRATIONS
4.1 GENERAL
4.2 DRY GAS METER
4.3 DILUTION TUNNEL
4.4 WEIGHING INSTRUMENTS
4.5 TEMPERATURE MEASUREMENT
4.6 DIFFERENTIAL PRESSURE MANOMETER AND DRAUGHT GAUGE
4.7 CARBON DIOXIDE ANALYZER
SECTION 5 TEST FUEL
5.1 GENERAL
5.2 TEST FUEL REQUIREMENTS FOR AUSTRALIA
SECTION 6 TEST PROCEDURE
6.1 GENERAL
6.2 DILUTION HOOD AND TUNNEL
6.3 DILUTION TUNNEL
6.3.1 General
6.3.2 Flue pipe draught
6.4 TEST PREPARATION
6.4.1 Appliance preparation
6.4.2 Sample collection system
6.5 TEST FUEL LOAD
6.5.1 Preparation
6.5.2 Fuel-loading geometry
6.6 BURN CYCLES
6.7 SAMPLING TRAIN OPERATION
6.8 SAMPLE TREATMENT
6.9 SAMPLE MEASUREMENT
6.10 CALCULATIONS
6.10.1 Sample weight
6.10.2 Sample flow volume
6.10.3 Dilution tunnel flow volume
6.10.4 Volume ratio
6.10.5 Particulate emission weight
6.10.6 Particulate emission factor
6.10.7 Burn-rate emission factors
6.10.8 Appliance particulate emission factor
SECTION 7 MAXIMUM ALLOWABLE APPLIANCE PARTICULATE EMISSION FACTOR
7.1 FOR AUSTRALIA
7.1.1 Appliances without catalytic combustors
7.1.2 Appliances with catalytic combustors
7.2 FOR NEW ZEALAND
7.3 VALID TESTS
SECTION 8 TESTING DOCUMENTATION AND TEST REPORTS
8.1 GENERAL
8.2 DOCUMENTATION
8.3 TEST REPORT
8.4 RETENTION OF RECORDS
8.5 PUBLISHED RESULTS
SECTION 9 VARIATION FROM TESTED APPLIANCE
9.1 GENERAL
9.2 RETESTING EXEMPTION
SECTION 10 MARKING
APPENDIX A - DRY GAS METER CALIBRATION
A1 SCOPE
A2 PRINCIPLE
A3 APPARATUS
A4 PROCEDURE
A5 REPORT
APPENDIX B - DILUTION TUNNEL CALIBRATION
B1 SCOPE
B2 PRINCIPLE
B3 PROCEDURE
B4 REPORT
APPENDIX C - CARBON DIOXIDE INSTRUMENT CALIBRATION
C1 SCOPE
C2 PRINCIPLE
C3 APPARATUS
C4 CALIBRATION PROCEDURE
C5 CALIBRATION BEFORE EACH USE
Previous versions
AS/NZS 4013:2014
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.