AS/NZS 3856.1:1998
Hoists and ramps for people with disabilities - Vehicle-mounted - Product requirements
Specifies design and performance requirements for appliances which incorporate a platform, ramp, sling, seat or harness, for use by people with disabilities in boarding and alighting from motor vehicles. Covers only those appliances that are attached to a vehicle.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$70.20 NZD
|
|
| HardCopy |
$78.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 3856.1:1998 HOISTS AND RAMPS FOR PEOPLE WITH DISABILITIES - VEHICLE-MOUNTED - PRODUCT REQUIREMENTS
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 OBJECTIVE
1.3 TYPES OF APPLIANCES
1.4 REFERENCED DOCUMENTS
1.5 DEFINITIONS
1.5.1 Appliance
1.5.2 Deploy
1.5.3 Edge barrier
1.5.4 Hoist
1.5.5 Inner roll stop
1.5.6 Interlock
1.5.7 Isolation control
1.5.8 Jerking
1.5.9 Lifting cycle
1.5.10 May
1.5.11 Outer roll stop
1.5.12 Platform
1.5.13 Ramp
1.5.14 Safe working load (SWL)
1.5.15 Shall
1.5.16 Should
1.5.17 Store
SECTION 2 MATERIALS, DESIGN, AND CONSTRUCTION REQUIREMENTS
2.1 TYPE A, TYPE B, TYPE D AND TYPE E APPLIANCES
2.1.1 Materials
2.1.2 Hydraulic equipment
2.1.3 Welding and brazing
2.1.4 Safe working load
2.1.5 Manually operated folding mechanisms
2.1.6 Control systems
2.1.7 Platforms
2.1.8 Ramps
2.2 TYPE C APPLIANCES
2.2.1 General
2.2.2 Controls
SECTION 3 PERFORMANCE REQUIREMENTS
3.1 GENERAL
3.2 TYPE A AND TYPE B APPLIANCES
3.2.1 Uncontrolled descent under gravity
3.2.2 Deflection
3.2.3 Static strength
3.2.4 Speed
3.2.5 Acceleration
3.2.6 Durability
3.3 TYPE D APPLIANCES
3.3.1 Durability
3.3.2 Ramp strength
3.4 TYPE E APPLIANCES
3.5 TYPE C APPLIANCES
SECTION 4 MARKING, LABELLING, AND WARRANTY REQUIREMENTS
4.1 MARKING
4.2 INFORMATION LABELLING
4.3 WARRANTY
APPENDIX A - TEST FOR PERFORMANCE OF A PLATFORM UNDER SIMULATED FAILURE OF OPERATING POWER OR EQUIPMENT
A1 SCOPE
A2 PRINCIPLE
A3 APPARATUS
A4 PROCEDURE
A5 REPORT
A6 RECORD
APPENDIX B - TEST FOR PLATFORM DEFLECTION
B1 SCOPE
B2 PRINCIPLE
B3 APPARATUS
B4 PROCEDURE
B5 REPORT
B6 RECORD
APPENDIX C - PLATFORM STRENGTH TEST
C1 SCOPE
C2 PRINCIPLE
C3 APPARATUS
C4 PROCEDURE
C5 REPORT
C6 RECORD
APPENDIX D - TEST FOR DYNAMIC DURABILITY, AND MEASUREMENT OF SPEED AND ACCELERATION
D1 SCOPE
D2 PRINCIPLE
D3 APPARATUS
D4 TEMPERATURE CONDITIONS FOR TEST
D5 PROCEDURE
D6 REPORT
D7 RECORD
APPENDIX E - RAMP STRENGTH TEST
E1 SCOPE
E2 PRINCIPLE
E3 APPARATUS
E4 PROCEDURE
E5 REPORT
E6 RECORD
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Land Transport Rule 31001: Passenger Service Vehicles 1999
Ministry: NZ Transport Agency
Section: 8.2(1)
Citation context:A wheelchair hoist and its attachment to a passenger service vehicle must either:... ...or AS/NZS 3856.1:1998 and AS/NZS 3856.2:1998 that were applicable at the time of attachment; or... ...versions of AS/NZS 3856.1:1998 and AS/NZS 3856.2:1998 that were applicable at the time of attachment.
Land Transport Rule 31001: Passenger Service Vehicles 1999
Ministry: NZ Transport Agency
Section: Part 3 Schedule
Citation context:Australian Standard/New Zealand Standard 3856.1:1998: Hoists and ramps for people with disabilities-Vehicle-mounted - Product requirements
Similar Standards
-
AS/NZS 1088.9:1995
Hearing aids - Immunity requirements and methods of measurement for hearing aids exposed to radiofrequency fields in the frequency range 300 MHz to 3 GHz
-
AS/NZS 1088.9:1995 A1
Hearing aids - Immunity requirements and methods of measurement for hearing aids exposed to radiofrequency fields in the frequency range 300 MHz to 3 GHz: Amendment 1
-
AS/NZS 1428.4.1:2009
Design for access and mobility - Part 4.1: Means to assist the orientation of people with vision impairment - Tactile ground surface indicators -
AS/NZS 1428.4.1:2009 A1
Design for access and mobility - Means to assist the orientation of people with vision impairment - Tactile ground surface indicators: Amendment 1
AS/NZS 3856.1:1998 HOISTS AND RAMPS FOR PEOPLE WITH DISABILITIES - VEHICLE-MOUNTED - PRODUCT REQUIREMENTS
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 OBJECTIVE
1.3 TYPES OF APPLIANCES
1.4 REFERENCED DOCUMENTS
1.5 DEFINITIONS
1.5.1 Appliance
1.5.2 Deploy
1.5.3 Edge barrier
1.5.4 Hoist
1.5.5 Inner roll stop
1.5.6 Interlock
1.5.7 Isolation control
1.5.8 Jerking
1.5.9 Lifting cycle
1.5.10 May
1.5.11 Outer roll stop
1.5.12 Platform
1.5.13 Ramp
1.5.14 Safe working load (SWL)
1.5.15 Shall
1.5.16 Should
1.5.17 Store
SECTION 2 MATERIALS, DESIGN, AND CONSTRUCTION REQUIREMENTS
2.1 TYPE A, TYPE B, TYPE D AND TYPE E APPLIANCES
2.1.1 Materials
2.1.2 Hydraulic equipment
2.1.3 Welding and brazing
2.1.4 Safe working load
2.1.5 Manually operated folding mechanisms
2.1.6 Control systems
2.1.7 Platforms
2.1.8 Ramps
2.2 TYPE C APPLIANCES
2.2.1 General
2.2.2 Controls
SECTION 3 PERFORMANCE REQUIREMENTS
3.1 GENERAL
3.2 TYPE A AND TYPE B APPLIANCES
3.2.1 Uncontrolled descent under gravity
3.2.2 Deflection
3.2.3 Static strength
3.2.4 Speed
3.2.5 Acceleration
3.2.6 Durability
3.3 TYPE D APPLIANCES
3.3.1 Durability
3.3.2 Ramp strength
3.4 TYPE E APPLIANCES
3.5 TYPE C APPLIANCES
SECTION 4 MARKING, LABELLING, AND WARRANTY REQUIREMENTS
4.1 MARKING
4.2 INFORMATION LABELLING
4.3 WARRANTY
APPENDIX A - TEST FOR PERFORMANCE OF A PLATFORM UNDER SIMULATED FAILURE OF OPERATING POWER OR EQUIPMENT
A1 SCOPE
A2 PRINCIPLE
A3 APPARATUS
A4 PROCEDURE
A5 REPORT
A6 RECORD
APPENDIX B - TEST FOR PLATFORM DEFLECTION
B1 SCOPE
B2 PRINCIPLE
B3 APPARATUS
B4 PROCEDURE
B5 REPORT
B6 RECORD
APPENDIX C - PLATFORM STRENGTH TEST
C1 SCOPE
C2 PRINCIPLE
C3 APPARATUS
C4 PROCEDURE
C5 REPORT
C6 RECORD
APPENDIX D - TEST FOR DYNAMIC DURABILITY, AND MEASUREMENT OF SPEED AND ACCELERATION
D1 SCOPE
D2 PRINCIPLE
D3 APPARATUS
D4 TEMPERATURE CONDITIONS FOR TEST
D5 PROCEDURE
D6 REPORT
D7 RECORD
APPENDIX E - RAMP STRENGTH TEST
E1 SCOPE
E2 PRINCIPLE
E3 APPARATUS
E4 PROCEDURE
E5 REPORT
E6 RECORD
AS/NZS 3856.1:1998
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.