AS/NZS 3661.1:1993
Slip resistance of pedestrian surfaces - Requirements
Specifies requirements and test methods for the measurement of the slip resistance of both wet and dry pedestrian surfaces.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$70.20 NZD
|
|
| HardCopy |
$78.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 3661.1-1993 SLIP RESISTANCE OF PEDESTRIAN SURFACES - REQUIREMENTS
PREFACE
CONTENTS
1 SCOPE
2 APPLICATION
3 REFERENCED DOCUMENTS
4 GENERAL
5 FRICTION REQUIREMENTS OF SURFACES
5.1 Horizontal surfaces
5.1.1 Coefficient of friction - wet
5.1.2 Coefficient of friction - dry
5.2 Ramps and other sloped areas
APPENDIX A - METHOD FOR THE MEASUREMENT OF THE COEFFICIENT OF FRITION OF WET SURFACES
A1 SCOPE
A2 PRINCIPLE
A3 APPARATUS
A3.1 Pendulum friction tester
A3.2 Rubber sliders
A3.2.1 General
A3.2.2 Slider material
A3.3 Water spray bottle
A3.4 Thermometer
A3.5 Abrasive
A3.6 Cleaning agents
A4 PREPARATION FOR LABORATORY TESTING
A4.1 Adjusting equipment
A4.2 Conditioning rubber sliders
A4.3 Test specimen
A4.3.1 General
A4.3.2 Test sample
A4.3.3 Size of test specimemn
A4.3.4 Preparation of test specimen
A5 PREAPARATION FOR IN SITU TESTING
A5.1 Preparation of equipment
A5.2 Environmental conditions
A5.3 Conditioning
A5.4 Test specimen
A5.5 General
A5.6 Test sample
A6 PROCEDURE
APPENDIX B - METHOD FOR THE MEASUREMENT OF THE COEFFICIENT OF FRICTION OF DRY SURFACES
B1 SCOPE
B2 PRINCIPLE
B3 APPARATUS
B3.1 Floor friction tester (FFT)
B3.2 Slider material
B3.3 Means of cutting rubber sheet
B3.4 Abrasive paper
B3.5 Cleaning agents
B4 SLIDER ASSEMBLY
B5 PREPARATION FOR LABORATORY TESTING
B5.1 Preparation of equipment
B5.2 Calibration of floor friction tester
B5.3 Conditioning
B5.4 Test specimen
B5.4.1 General
B5.4.2 Size of test specimen
B5.4.3 Preparation of test specimen
B5.4.4 Test sample
B6 PREPARATION FOR IN SITU TESTING
B6.1 Preparation of the equipment
B6.2 Conditioning
B6.3 Test specimen
B6.3.1 General
B6.3.2 Test sample
B7 PROCEDURE
B7.1 Measurement of unfixed surfaces
B7.2 Measurement of fixed surfaces
B8 REPORT
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Guide To Health And Safety In The Timber Processing Industry
Ministry: WorkSafe New Zealand
Section: 1.4 Good practice for safe access
Citation context:How to minimise the risks - Non-slip surfacing: ... See the standards for non-slip surfaces (AS/NZS 3661.1 : 1993 : Requirements and AS/NZS 3661.2 : 1994 : Guide to reduction of slip hazards) for more detailed information.
Similar Standards
-
AS/NZS 2499:2000
Acoustics - Measurements of sound insulation in buildings and of buildings elements - Laboratory measurement of room-to-room airborne sound insulation of a suspended ceiling with a plenum above it
-
AS/NZS 2785:2020
Suspended ceilings - Design and installation -
AS/NZS 3661.2:1994
Slip resistance of pedestrian surfaces - Part 2: Guide to the reduction of slip hazards -
AS/NZS 4586:2004
Slip resistance classification of new pedestrian surface materials
Related News
AS/NZS 3661.1-1993 SLIP RESISTANCE OF PEDESTRIAN SURFACES - REQUIREMENTS
PREFACE
CONTENTS
1 SCOPE
2 APPLICATION
3 REFERENCED DOCUMENTS
4 GENERAL
5 FRICTION REQUIREMENTS OF SURFACES
5.1 Horizontal surfaces
5.1.1 Coefficient of friction - wet
5.1.2 Coefficient of friction - dry
5.2 Ramps and other sloped areas
APPENDIX A - METHOD FOR THE MEASUREMENT OF THE COEFFICIENT OF FRITION OF WET SURFACES
A1 SCOPE
A2 PRINCIPLE
A3 APPARATUS
A3.1 Pendulum friction tester
A3.2 Rubber sliders
A3.2.1 General
A3.2.2 Slider material
A3.3 Water spray bottle
A3.4 Thermometer
A3.5 Abrasive
A3.6 Cleaning agents
A4 PREPARATION FOR LABORATORY TESTING
A4.1 Adjusting equipment
A4.2 Conditioning rubber sliders
A4.3 Test specimen
A4.3.1 General
A4.3.2 Test sample
A4.3.3 Size of test specimemn
A4.3.4 Preparation of test specimen
A5 PREAPARATION FOR IN SITU TESTING
A5.1 Preparation of equipment
A5.2 Environmental conditions
A5.3 Conditioning
A5.4 Test specimen
A5.5 General
A5.6 Test sample
A6 PROCEDURE
APPENDIX B - METHOD FOR THE MEASUREMENT OF THE COEFFICIENT OF FRICTION OF DRY SURFACES
B1 SCOPE
B2 PRINCIPLE
B3 APPARATUS
B3.1 Floor friction tester (FFT)
B3.2 Slider material
B3.3 Means of cutting rubber sheet
B3.4 Abrasive paper
B3.5 Cleaning agents
B4 SLIDER ASSEMBLY
B5 PREPARATION FOR LABORATORY TESTING
B5.1 Preparation of equipment
B5.2 Calibration of floor friction tester
B5.3 Conditioning
B5.4 Test specimen
B5.4.1 General
B5.4.2 Size of test specimen
B5.4.3 Preparation of test specimen
B5.4.4 Test sample
B6 PREPARATION FOR IN SITU TESTING
B6.1 Preparation of the equipment
B6.2 Conditioning
B6.3 Test specimen
B6.3.1 General
B6.3.2 Test sample
B7 PROCEDURE
B7.1 Measurement of unfixed surfaces
B7.2 Measurement of fixed surfaces
B8 REPORT
AS/NZS 3661.1:1993
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.