AS/NZS 3019:2007
Electrical installations - Periodic verification
Provides persons who carry out periodic verification, by inspection and/or testing, with the means to determine, as far as reasonably practicable, whether the installation and all its constituent equipment is in a safe condition for continued use, and that the electrical installation complies with the safety requirements for the prevention of fire or a person or livestock from sustaining an electric shock.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$100.80 NZD
|
|
| HardCopy |
$112.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 Scope
1.2 Types of verification covered
1.3 Referenced documents
1.4 Definitions
1.5 Interpretation
SECTION 2 GENERAL REQUIREMENTS
2.1 Reporting of electrically unsafe installations
2.2 Previous records
2.3 Verification requirements
2.4 Danger to persons or livestock
2.5 Adequacy of overcurrent protective devices
2.6 Instruments
2.7 Qualification
2.8 Frequency of periodic verification
2.9 Reporting of periodic verification
SECTION 3 VERIFICATION BY BASIC VISUAL INSPECTION
3.1 General
3.2 Inspection requirements
SECTION 4 VERIFICATION BY VISUAL INSPECTION AND LIMITED TESTING
4.1 Verification requirements
4.2 General
4.3 Switchboards
4.4 Main earthing conductor
4.5 Fixed wired appliances
4.6 Overhead lines
4.7 Testing requirements
SECTION 5 VERIFICATION BY VISUAL INSPECTION AND FULL TESTING
5.1 Requirements
5.2 Polarity
5.3 Polarisation
5.4 Insulation resistance
5.5 Earth fault loop impedance
5.6 Protective device fault rating
5.7 RCD verification
5.8 Integrity of switchboard connections
5.9 Testing of final subcircuits supplied from an electrically separated supply
Appendix
A Periodic Verification Report Forms
AS/NZS 3019 Form 1
AS/NZS 3019 Form 2
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
References
Electrical installations - Requirements for the safe supply of electricity to installations, facilities and equipment operating at non-standard voltages and frequencies
Safe application of electricity in the meat processing industry
Related Information
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 26(4)
Citation context:A fitting described in subclause (1)(b) or (c) is deemed to be electrically safe if it is a fitting that is part of an installation and it complies with AS/NZS 3019.
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: 74(3)
Citation context:If the period since the last disconnection or isolation is more than 6 months, regulation 73 does not apply, but the person proposing to reconnect or restore supply must, before doing so, give or sight a certificate issued in accordance with section 3 of AS/NZS 3019 that—.....
Electricity (Safety) Regulations 2010
Ministry: WorkSafe New Zealand: Energy Safety
Section: Schedule 2
Citation context:AS/NZS 3019 (means) AS/NZS 3019:2007: Electrical installations - Periodic verification
Similar Standards
-
AS/NZS 1020:2023
The control of static electricity in non-hazardous area
-
AS/NZS 2500:2020
Safe use of medical electrical equipment in health care -
AS/NZS 2978:1995
Insulating mats for electrical purposes
-
AS/NZS 3000:2018
Electrical installations - Known as the Australian/New Zealand Wiring Rules
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 Scope
1.2 Types of verification covered
1.3 Referenced documents
1.4 Definitions
1.5 Interpretation
SECTION 2 GENERAL REQUIREMENTS
2.1 Reporting of electrically unsafe installations
2.2 Previous records
2.3 Verification requirements
2.4 Danger to persons or livestock
2.5 Adequacy of overcurrent protective devices
2.6 Instruments
2.7 Qualification
2.8 Frequency of periodic verification
2.9 Reporting of periodic verification
SECTION 3 VERIFICATION BY BASIC VISUAL INSPECTION
3.1 General
3.2 Inspection requirements
SECTION 4 VERIFICATION BY VISUAL INSPECTION AND LIMITED TESTING
4.1 Verification requirements
4.2 General
4.3 Switchboards
4.4 Main earthing conductor
4.5 Fixed wired appliances
4.6 Overhead lines
4.7 Testing requirements
SECTION 5 VERIFICATION BY VISUAL INSPECTION AND FULL TESTING
5.1 Requirements
5.2 Polarity
5.3 Polarisation
5.4 Insulation resistance
5.5 Earth fault loop impedance
5.6 Protective device fault rating
5.7 RCD verification
5.8 Integrity of switchboard connections
5.9 Testing of final subcircuits supplied from an electrically separated supply
Appendix
A Periodic Verification Report Forms
AS/NZS 3019 Form 1
AS/NZS 3019 Form 2
Previous versions
AS/NZS 3019:2007
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.