AS/NZS 2924.1:1998
High pressure decorative laminates - Sheets made from thermosetting resins - Classification and specifications
Establishes a classification system for high pressure decorative laminated sheets according to their performance and main recommended fields of application, including materials with special characteristics, for example postformability or defined reaction to fire. Also specifies requirements on the properties of the various types of laminate covered by this classification. For several of the properties, more than one test method for checking the requirements is given. This Standard is identical with and has been reproduced from ISO 4586-1:1995.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$70.20 NZD
|
|
| HardCopy |
$78.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 2924.1:1998 HIGH-PRESSURE DECORATIVE LAMINATES-SHEETS MADE FROM THERMOSETTING RESINS - CLASSIFICATION AND SPECIFICATIONS
PREFACE
CONTENTS
1 Scope
2 Normative references
3 Definition
4 Classification system
4.1 Index numbers for specifying HPDL properties
4.2 Material type - Special characteristics
4.2.1 Type P - Postformable decorative laminated sheet
4.2.2 Type F - Decorative laminated sheet having defined reaction to fire
4.3 Application characteristics
4.4 Properties
4.4.1 Resistance to surface wear (first property)
4.4.2 Resistance to impact by small-diameter ball
4.4.3 Resistance to scratching
4.5 Nomenclature
5 Requirements
5.1 Compliance
5.2 Notes on requirements for reaction to fire
6 Properties
6.1 Colour and pattern
6.2 Surface finish
6.2.1 Finish matching
6.2.2 Bonding
6.3 Thickness
6.4 Appearance
6.4.1 Surface defects
6.4.2 Edge defects
6.4.3 Broken corners
6.4.4 Sanding defects
6.4.5 Flatness
6.4.6 Length and width of a full-size laminate
6.4.7 Straightness of edges
6.4.8 Squareness of the laminate
6.5 Other properties
Annex A - Addendum to specifications table 7, relating to test methods 7, 9 and 10
Annex B - Addendum to specifications table 7, relating to test method 14
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 2924.1:2024
High-pressure decorative laminates (HPL, HPDL) – Sheets based on thermosetting resins (usually called laminates) Part 1: Introduction and general information
-
AS/NZS 2924.2:2024
High-pressure decorative laminates (HPL, HPDL) – Sheets based on thermosetting resins (usually called laminates) Part 2: Determination of properties
-
AS/NZS 2924.3:2024
High-pressure decorative laminates (HPL, HPDL) – Sheets based on thermosetting resins (usually called laminates) Part 3: Classification and specifications for laminates less than 2 mm thick and intended for bonding to supporting substrates
-
AS/NZS 2924.4:2024
High-pressure decorative laminates (HPL, HPDL) – Sheets based on thermosetting resins (usually called laminates) Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater
AS/NZS 2924.1:1998 HIGH-PRESSURE DECORATIVE LAMINATES-SHEETS MADE FROM THERMOSETTING RESINS - CLASSIFICATION AND SPECIFICATIONS
PREFACE
CONTENTS
1 Scope
2 Normative references
3 Definition
4 Classification system
4.1 Index numbers for specifying HPDL properties
4.2 Material type - Special characteristics
4.2.1 Type P - Postformable decorative laminated sheet
4.2.2 Type F - Decorative laminated sheet having defined reaction to fire
4.3 Application characteristics
4.4 Properties
4.4.1 Resistance to surface wear (first property)
4.4.2 Resistance to impact by small-diameter ball
4.4.3 Resistance to scratching
4.5 Nomenclature
5 Requirements
5.1 Compliance
5.2 Notes on requirements for reaction to fire
6 Properties
6.1 Colour and pattern
6.2 Surface finish
6.2.1 Finish matching
6.2.2 Bonding
6.3 Thickness
6.4 Appearance
6.4.1 Surface defects
6.4.2 Edge defects
6.4.3 Broken corners
6.4.4 Sanding defects
6.4.5 Flatness
6.4.6 Length and width of a full-size laminate
6.4.7 Straightness of edges
6.4.8 Squareness of the laminate
6.5 Other properties
Annex A - Addendum to specifications table 7, relating to test methods 7, 9 and 10
Annex B - Addendum to specifications table 7, relating to test method 14
Previous versions
AS/NZS 2924.1:1998
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.