AS/NZS 2699.2:2000
Built-in components for masonry construction - Connectors and accessories
Specifies performance requirements covering corrosion resistance and tests for structural serviceability, for connectors and accessories built into masonry.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$100.80 NZD
|
|
| HardCopy |
$112.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 2699.2:2000 BUILT-IN COMPONENTS FOR MASONRY CONSTRUCTION - CONNECTORS AND ACCESSORIES
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE AND APPLICATION
1.2 REFERENCED DOCUMENTS
1.3 NEW TECHNOLOGIES
1.4 DEFINITIONS
1.4.1 Capacity design procedure
1.4.2 Characteristic strength
1.4.3 Characteristic value
1.4.4 Connectors and accessories
1.4.5 Ductility
1.4.6 Duplex coating
1.4.7 Durability classification (R)
1.4.8 Galvanized coating
1.4.9 Lot
1.4.10 Masonry couplet
1.4.11 Monotonic test
1.4.12 Organic coating
1.4.13 Overstrength factor
1.4.14 Residual load
1.4.15 Specimen
1.4.16 Substrate
SECTION 2 PERFORMANCE CRITERIA
2.1 SCOPE OF SECTION
2.2 AIM
2.3 SAFETY
2.4 DURABILITY
2.4.1 General
2.4.2 Damage
2.4.3 Classification of materials
2.4.4 Durability criteria for connectors and accessories
2.4.5 Test methods
2.5 RESISTANCE TO WATER TRANSFER
2.6 EMBEDMENT, MOVEMENT AND TOLERANCE
2.7 STRUCTURAL PERFORMANCE
SECTION 3 DEEMED-TO-COMPLY PROVISIONS FOR MATERIAL SELECTION
SECTION 4 IDENTIFICATION MARKS
4.1 CONNECTORS AND ACCESSORIES MARKING
4.2 DURABILITY COLOUR CODING
4.3 PACKAGE MARKING
SECTION 5 ASSESSMENT OF COMPLIANCE WITH THIS STANDARD
5.1 GENERAL
5.2 SAMPLING
5.3 MANUFACTURERS’ CERTIFICATE
APPENDIX A - STRUCTURAL PERFORMANCE TEST METHODS
A1 SCOPE AND GENERAL
A2 PRINCIPLE
A3 MATERIALS
A4 APPARATUS
A5 SAMPLE
A6 LOADING REGIMES
A7 NOTATIONS
A8 PREPARATION FOR TESTING
A8.1 Construction of test specimens
A8.2 Specimen conditioning
A8.3 Setting up for testing
A9 TESTING PROCEDURES
A9.1 General
A9.2 Gravity
A9.3 Cyclonic
A9.4 Seismic
A10 DATA ANALYSIS
A10.1 Stiffness
A10.2 Strength
A11 REPORT
APPENDIX B - METHOD FOR DETERMINING THE DURABILITY CLASSIFICATION OF BARE CONNECTORS AND ACCESSORIES OR CONNECTORS AND....
B1 SCOPE
B2 PRINCIPLE
B3 APPARATUS
B4 SAMPLE
B5 PREPARATION OF SPECIMENS
B6 PROCEDURE FOR CORROSION TESTING
B6.1 Weighing
B6.2 Test procedure
B6.3 Examination
B6.4 Total coating mass determination
B7 INTERPRETATION OF RESULTS
B7.1 General
B7.2 Interpretation of results for metallic coatings
B7.3 Interpretation of results for bare (uncoated) metals
B8 RECORDS
B9 REPORT
APPENDIX C - METHOD FOR DETERMINING THE DURABILITY CLASSIFICATION OF STEEL CONNECTORS AND ACCESSORIES WITH AN ORGANIC OR...
C1 SCOPE
C2 PRINCIPLE
C3 APPARATUS
C4 SAMPLE
C5 ALKALI SENSITIVITY TEST
C6 CORROSION RESISTANCE TEST
C6.1 Preparation of components
C6.2 Preparation of specimens
C6.3 Test procedure
C6.4 Examination of components
C6.5 Determination of coating mass or thickness
C6.6 Interpretation of the results
C7 RECORDS
C8 REPORT
APPENDIX D - METHOD OF TEST FOR RESISTANCE TO WATER TRANSFER
D1 SCOPE
D2 PRINCIPLE
D3 MATERIALS
D4 APPARATUS
D5 SAMPLE
D6 PREPARATION FOR TESTING
D6.1 Preparation of specimens for testing
D6.2 Setting up of specimens for testing
D7 PROCEDURE
D8 REPORT
APPENDIX E - TEST TO IDENTIFY STAINLESS STEEL GRADE AS 1449/316 OR 316L
E1 GENERAL
E2 TEST CHEMICALS
E2.1 Solution A
E2.2 Solution B
E3 TEST REQUIREMENTS
E4 TEST METHOD
APPENDIX F - MEANS FOR DEMONSTRATING COMPLIANCE WITH THIS STANDARD
F1 SCOPE
F2 STATISTICAL SAMPLING
F3 PRODUCT CERTIFICATION
F4 SUPPLIER’S QUALITY SYSTEM
F5 OTHER MEANS OF ASSESSMENT
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
References
Built-in components for masonry construction - Lintels and shelf angles (durability requirements)
Damp-proof courses and flashings
Related Information
Building Code Compliance Document SH
Ministry: Ministry of Business, Innovation, and Employment - Building Systems Performance (BSP)
Section: AS1
Citation context:Similar Standards
-
AS/NZS 2699.1:2000
Built-in components for masonry construction - Wall ties
-
AS/NZS 2699.3:2002
Built-in components for masonry construction - Lintels and shelf angles (durability requirements)
-
AS/NZS 4455.1:2008
Masonry units, pavers, flags and segmental retaining wall units - Masonry units
-
AS/NZS 4455.2:2010
Masonry units, pavers, flags and segmental retaining wall units - Pavers and flags
AS/NZS 2699.2:2000 BUILT-IN COMPONENTS FOR MASONRY CONSTRUCTION - CONNECTORS AND ACCESSORIES
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE AND APPLICATION
1.2 REFERENCED DOCUMENTS
1.3 NEW TECHNOLOGIES
1.4 DEFINITIONS
1.4.1 Capacity design procedure
1.4.2 Characteristic strength
1.4.3 Characteristic value
1.4.4 Connectors and accessories
1.4.5 Ductility
1.4.6 Duplex coating
1.4.7 Durability classification (R)
1.4.8 Galvanized coating
1.4.9 Lot
1.4.10 Masonry couplet
1.4.11 Monotonic test
1.4.12 Organic coating
1.4.13 Overstrength factor
1.4.14 Residual load
1.4.15 Specimen
1.4.16 Substrate
SECTION 2 PERFORMANCE CRITERIA
2.1 SCOPE OF SECTION
2.2 AIM
2.3 SAFETY
2.4 DURABILITY
2.4.1 General
2.4.2 Damage
2.4.3 Classification of materials
2.4.4 Durability criteria for connectors and accessories
2.4.5 Test methods
2.5 RESISTANCE TO WATER TRANSFER
2.6 EMBEDMENT, MOVEMENT AND TOLERANCE
2.7 STRUCTURAL PERFORMANCE
SECTION 3 DEEMED-TO-COMPLY PROVISIONS FOR MATERIAL SELECTION
SECTION 4 IDENTIFICATION MARKS
4.1 CONNECTORS AND ACCESSORIES MARKING
4.2 DURABILITY COLOUR CODING
4.3 PACKAGE MARKING
SECTION 5 ASSESSMENT OF COMPLIANCE WITH THIS STANDARD
5.1 GENERAL
5.2 SAMPLING
5.3 MANUFACTURERS’ CERTIFICATE
APPENDIX A - STRUCTURAL PERFORMANCE TEST METHODS
A1 SCOPE AND GENERAL
A2 PRINCIPLE
A3 MATERIALS
A4 APPARATUS
A5 SAMPLE
A6 LOADING REGIMES
A7 NOTATIONS
A8 PREPARATION FOR TESTING
A8.1 Construction of test specimens
A8.2 Specimen conditioning
A8.3 Setting up for testing
A9 TESTING PROCEDURES
A9.1 General
A9.2 Gravity
A9.3 Cyclonic
A9.4 Seismic
A10 DATA ANALYSIS
A10.1 Stiffness
A10.2 Strength
A11 REPORT
APPENDIX B - METHOD FOR DETERMINING THE DURABILITY CLASSIFICATION OF BARE CONNECTORS AND ACCESSORIES OR CONNECTORS AND....
B1 SCOPE
B2 PRINCIPLE
B3 APPARATUS
B4 SAMPLE
B5 PREPARATION OF SPECIMENS
B6 PROCEDURE FOR CORROSION TESTING
B6.1 Weighing
B6.2 Test procedure
B6.3 Examination
B6.4 Total coating mass determination
B7 INTERPRETATION OF RESULTS
B7.1 General
B7.2 Interpretation of results for metallic coatings
B7.3 Interpretation of results for bare (uncoated) metals
B8 RECORDS
B9 REPORT
APPENDIX C - METHOD FOR DETERMINING THE DURABILITY CLASSIFICATION OF STEEL CONNECTORS AND ACCESSORIES WITH AN ORGANIC OR...
C1 SCOPE
C2 PRINCIPLE
C3 APPARATUS
C4 SAMPLE
C5 ALKALI SENSITIVITY TEST
C6 CORROSION RESISTANCE TEST
C6.1 Preparation of components
C6.2 Preparation of specimens
C6.3 Test procedure
C6.4 Examination of components
C6.5 Determination of coating mass or thickness
C6.6 Interpretation of the results
C7 RECORDS
C8 REPORT
APPENDIX D - METHOD OF TEST FOR RESISTANCE TO WATER TRANSFER
D1 SCOPE
D2 PRINCIPLE
D3 MATERIALS
D4 APPARATUS
D5 SAMPLE
D6 PREPARATION FOR TESTING
D6.1 Preparation of specimens for testing
D6.2 Setting up of specimens for testing
D7 PROCEDURE
D8 REPORT
APPENDIX E - TEST TO IDENTIFY STAINLESS STEEL GRADE AS 1449/316 OR 316L
E1 GENERAL
E2 TEST CHEMICALS
E2.1 Solution A
E2.2 Solution B
E3 TEST REQUIREMENTS
E4 TEST METHOD
APPENDIX F - MEANS FOR DEMONSTRATING COMPLIANCE WITH THIS STANDARD
F1 SCOPE
F2 STATISTICAL SAMPLING
F3 PRODUCT CERTIFICATION
F4 SUPPLIER’S QUALITY SYSTEM
F5 OTHER MEANS OF ASSESSMENT
Previous versions
AS/NZS 2699.2:2000
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.