AS/NZS 2642.3:2008
Polybutylene (PB) plumbing pipe systems - Mechanical jointing fittings for use with polybutylene (PB) pipes for hot and cold water applications
Provides manufacturers and purchasers with a standard specification for mechanical jointing fittings suitable for use as fixed joints with polybutylene plumbing pipes manufactured in accordance with AS/NZS 2642.2.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$108.90 NZD
|
|
| HardCopy |
$121.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 2642.3:2008 POLYBUTYLENE (PB) PLUMBING PIPE SYSTEMS - MECHANICAL JOINTING FITTINGS FOR USE WITH POLYBUTYLENE (PB)...
PREFACE
CONTENTS
1 SCOPE
2 APPLICATION
3 REFERENCED DOCUMENTS
4 DEFINITIONS
5 CLASSIFICATION
6 PRESSURE RATING ACCORDING TO PIPE MATERIAL TEMPERATURE
7 SIZE AND TYPE
8 COMPOSITION
8.1 General
8.2 Dezincification resistance
9 TOXICITY AND EFFECT ON WATER
10 FREEDOM FROM DEFECTS
10.1 General
10.2 Requirements
10.2.1 General requirements
10.2.2 Requirements specific to plastic materials
10.2.3 Requirements specific to metallic materials
11 FASTENING
12 PERFORMANCE REQUIREMENTS
12.1 Selection of class of pipe
12.2 Test requirements
12.2.1 Compatibility of fittings with pipe
12.2.2 Resistance to leakage when subjected to bending
12.2.3 Resistance to pull-out of assembled joints
12.2.4 Thermal cycling test
12.2.5 Liquid infiltration
12.2.6 Pressure cycling test
12.2.7 Porosity test
12.2.8 Short-term pressure test
12.3 Selection of fittings
13 MARKING
APPENDIX A - MEANS FOR DEMONSTRATING CONFORMITY WITH THIS STANDARD
A1 SCOPE
A2 RELEVANCE
A3 DEFINITIONS
A3.1 Acceptable quality level (AQL)
A3.2 Batch
A3.3 Batch release test (BRT)
A3.4 Inspection level
A3.5 Lot
A3.6 New formulation
A3.7 Process verification test (PVT)
A3.8 Sample
A3.9 Sampling plan
A3.10 Type test (TT)
A4 ‚TEXT DELETED™
A5 MINIMUM SAMPLING AND TESTING FREQUENCY PLAN
A5.1 General
A5.2 Testing
A5.3 Retesting
A5.4 Rejection after test
APPENDIX B - METHODS OF SPECIFYING SIZES AND TYPES OF FITTINGS
B1 SCOPE
B2 ORDER OF SPECIFYING
APPENDIX C - METHOD FOR DETERMINING RESISTANCE TO LEAKAGE WHEN SUBJECTED TO BENDING
C1 SCOPE
C2 APPARATUS
C3 PREPARATION OF JOINT ASSEMBLIES
C4 PROCEDURE
C4.1 Conditioning and testing at 95 ±1°C
¿C4.2 Conditioning and testing at 20 ¿5°C
C5 TEST REPORT
APPENDIX D - METHOD FOR DETERMINING RESISTANCE TO PULL-OUT OF ASSEMBLED JOINTS
D1 SCOPE
D2 PRINCIPLE
D3 APPARATUS
D4 PREPARATION OF JOINT ASSEMBLIES
D5 TEST LOADS
D6 PROCEDURE
¿D6.1 Conditioning and testing at 95 ¿1°C
D6.2 Conditioning and testing at 20 ±5°C
D7 TEST REPORT
APPENDIX E - THERMAL CYCLING TEST
E1 SCOPE
E2 PRINCIPLE
E3 APPARATUS
E4 ASSEMBLY
E5 PROCEDURE
E6 TEST REPORT
APPENDIX F - METHOD FOR DETERMINING LIQUID INFILTRATION
F1 SCOPE
F2 APPARATUS
F3 PREPARATION OF JOINT ASSEMBLIES
F4 PROCEDURE
F5 TEST REPORT
Amendments
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Building Code Compliance Document G12
Ministry: Ministry of Business, Innovation, and Employment - Building Systems Performance (BSP)
Section: AS1
Citation context:Building Code Compliance Document G14
Ministry: Ministry of Business, Innovation, and Employment - Building Systems Performance (BSP)
Section: VM1
Citation context:Similar Standards
-
AS/NZS 1516:1994
The cement mortar lining of pipelines in situ
-
AS/NZS 2537.1:2011
Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications - Part 1: Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - General
-
AS/NZS 2537.1:2011
Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications - Part 1: Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - General -
AS/NZS 2537.2:2011
Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications - Part 2: Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Fittings
AS/NZS 2642.3:2008 POLYBUTYLENE (PB) PLUMBING PIPE SYSTEMS - MECHANICAL JOINTING FITTINGS FOR USE WITH POLYBUTYLENE (PB)...
PREFACE
CONTENTS
1 SCOPE
2 APPLICATION
3 REFERENCED DOCUMENTS
4 DEFINITIONS
5 CLASSIFICATION
6 PRESSURE RATING ACCORDING TO PIPE MATERIAL TEMPERATURE
7 SIZE AND TYPE
8 COMPOSITION
8.1 General
8.2 Dezincification resistance
9 TOXICITY AND EFFECT ON WATER
10 FREEDOM FROM DEFECTS
10.1 General
10.2 Requirements
10.2.1 General requirements
10.2.2 Requirements specific to plastic materials
10.2.3 Requirements specific to metallic materials
11 FASTENING
12 PERFORMANCE REQUIREMENTS
12.1 Selection of class of pipe
12.2 Test requirements
12.2.1 Compatibility of fittings with pipe
12.2.2 Resistance to leakage when subjected to bending
12.2.3 Resistance to pull-out of assembled joints
12.2.4 Thermal cycling test
12.2.5 Liquid infiltration
12.2.6 Pressure cycling test
12.2.7 Porosity test
12.2.8 Short-term pressure test
12.3 Selection of fittings
13 MARKING
APPENDIX A - MEANS FOR DEMONSTRATING CONFORMITY WITH THIS STANDARD
A1 SCOPE
A2 RELEVANCE
A3 DEFINITIONS
A3.1 Acceptable quality level (AQL)
A3.2 Batch
A3.3 Batch release test (BRT)
A3.4 Inspection level
A3.5 Lot
A3.6 New formulation
A3.7 Process verification test (PVT)
A3.8 Sample
A3.9 Sampling plan
A3.10 Type test (TT)
A4 ‚TEXT DELETED™
A5 MINIMUM SAMPLING AND TESTING FREQUENCY PLAN
A5.1 General
A5.2 Testing
A5.3 Retesting
A5.4 Rejection after test
APPENDIX B - METHODS OF SPECIFYING SIZES AND TYPES OF FITTINGS
B1 SCOPE
B2 ORDER OF SPECIFYING
APPENDIX C - METHOD FOR DETERMINING RESISTANCE TO LEAKAGE WHEN SUBJECTED TO BENDING
C1 SCOPE
C2 APPARATUS
C3 PREPARATION OF JOINT ASSEMBLIES
C4 PROCEDURE
C4.1 Conditioning and testing at 95 ±1°C
¿C4.2 Conditioning and testing at 20 ¿5°C
C5 TEST REPORT
APPENDIX D - METHOD FOR DETERMINING RESISTANCE TO PULL-OUT OF ASSEMBLED JOINTS
D1 SCOPE
D2 PRINCIPLE
D3 APPARATUS
D4 PREPARATION OF JOINT ASSEMBLIES
D5 TEST LOADS
D6 PROCEDURE
¿D6.1 Conditioning and testing at 95 ¿1°C
D6.2 Conditioning and testing at 20 ±5°C
D7 TEST REPORT
APPENDIX E - THERMAL CYCLING TEST
E1 SCOPE
E2 PRINCIPLE
E3 APPARATUS
E4 ASSEMBLY
E5 PROCEDURE
E6 TEST REPORT
APPENDIX F - METHOD FOR DETERMINING LIQUID INFILTRATION
F1 SCOPE
F2 APPARATUS
F3 PREPARATION OF JOINT ASSEMBLIES
F4 PROCEDURE
F5 TEST REPORT
Amendments
Previous versions
AS/NZS 2642.3:2008
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.